llext_load() can return positive values when the respective llext use
count is positive. Add the missing documentation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Minor improvements to usage of zperf_shell upload.
Added common defaults for the upload commands arguments.
Print defaults in cmd help.
Throw warning when user sets baud rate for TCP upload.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
bst_delete() is called from an ON_EXIT hook, which can be called
several times if an exit hook itself fails and calls exit on
its own.
This is not what most tests destructors will expect, and they
may do weird things in this case. So let's not call into it again.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
- Do not look CONFIG_* symbols from dynamic symbols which might
be there before the symbol table where CONFIG_* symbols are found.
- Define posix architecture in ARCHS list.
- Check if architecture is not found instead of letting the code
run into trying to access dictionary with None key.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Add more error logs in case of (mostly) mbed TLS errors, so it's easier
to get an initial idea of what went wrong based on logs only. Getting
an information on an actual mbed TLS error code is quite helpful in such
cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace direct access to RESET register to control the network CPU with
dedicated API, which allows safely sharing the network CPU with other
users.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit introduces a common API for managing nRF53 SoC network CPU
Force-OFF state.
From the application CPU point of view, the network CPU is a shared
resource used by multiple users. The current solution where every user
controls the network core state directly leads to dependencies between
users and does not scale well.
To address this problem there should be a single entity responsible for
controlling the network CPU Force-OFF signal. This commit introduces
such module.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Add nRF54L15 to platform_allow in the sample.yaml:
- clock_control_api,
- nrf_clock_calibration,
- nrf_lf_clock_start,
- onoff.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
* Update the HW models module to
c8fd53aab0c52b3898e5b89ca7c3e1a96e299306
Including the following:
* c8fd53a RADIO: Support logical address selection
* 31614b4 RADIO: Add test interface to offset Tx and Rx power
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add handling of SCK initial value based on the SPI mode used.
If mode is using CPOL then SCK needs to be set.
Fixes: #71154
Signed-off-by: Joakim Andersson <joakim.andersson@heimdallpower.com>
Fix setting of sample frequency.
The nrfx drivers are now using raw integere values instead of nrf
definitions.
Fixes: #71154
Signed-off-by: Joakim Andersson <joakim.andersson@heimdallpower.com>
Use CONFIG_BT_CTLR_CENTRAL_ISO instead of CONFIG_BT_CENTRAL in
declaring central CIS CREATE procedure context data. In some configs the
size of this data structure is bound by central CIS CREATE, so doing it
correctly will save memory in the procedure context allocation.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
There's no way this log level was intentional: this line is just the
title / prefix of a multi-line section with mostly LOG_INF statements.
Fixes commit 6423bc3bc8 ("drivers: dai: intel: ssp: Improve logging
output") which was very large hence error-prone.
Fixes SOF bug https://github.com/thesofproject/sof/issues/9026
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Mention the new can_get_bitrate_min() and can_get_bitrate_max() CAN
controller API functions along with the deprecating of the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Since the minimum/maximum supported bitrates are now stored in the common
CAN controller driver configuration struct, retrieving these can no longer
fail.
Add new CAN controller API functions can_get_bitrate_min() and
can_get_bitrate_max() reflecting this and deprecate the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Previously the logic was inverted for error_callback_en where 0 was
enablement and 1 was disable. This was likely done so that the default,
sensibly so, was to enable the error callback if possible. A variety of
in tree users had confused the enable/disable value.
Change the name of the flag to error_callback_dis where the default
remains 0 (do not disable the callback!) and correct in tree uses of the
flag where it seemed incorrect.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Bump the CAN controller API version from 1.0.0 to 1.1.0 to reflect bus
recovery API changes introduced for v3.7.0.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The directory name in boards has been changed with the addition of
support for Arduino UNO R4 WiFi, so add a redirect from
boards/arduino/uno_r4_minima to boards/arduino/uno_r4.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Currently, all devices are initialized at boot time (following their
level and priority order). This patch introduces deferred
initialization: by setting the property `zephyr,deferred-init` on a
device on the devicetree, Zephyr will not initialized the device.
To initialize such devices, one has to call `device_init()`.
Deferred initialization is done by grouping all deferred devices on a
different ELF section. In this way, there's no need to consume more
memory to keep track of deferred devices. When `device_init()` is
called, Zephyr will scan the deferred devices section and call the
initialization function for the matching device. As this scanning is
done only during deferred device initialization, its cost should be
bearable.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Extend ieee802154 transmit function documentation with the expected
return code for correctly received invalid ACK packets.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Currently you have to manually type out the device name for each command.
This commit adds support for <device> entry tab completion and device
lookup if help is enabled.
Signed-off-by: Hans Binderup <habi@bang-olufsen.dk>
LLEXT on Xtensa now supports both shared and relocatable (partially
linked) extensions. This commit adds a copy of the LLEXT test for the
relocatable case.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently LLEXT on Xtensa supports relocatable extensions, linked for
a specific address range, while relocation itself takes place in a
temporary buffer. For this section addresses have to be set correctly
by the linker for their target locations.
This commit adds support for relocatable extensions, built without
using specific memory addresses and run at the same addresses, where
they are loaded.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This commit adds support for building relocatable (partially linked)
ELF files as the binary object type for the llext subsystem.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This change allows the `add_llext_target` function to accept multiple
source files when building an ELF shared library. The ELF object
target type is still limited to a single source file, since there is no
linking step in that case.
Also fixes a minor typo in another llext function documentation.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add a new Kconfig option to select the binary object type for the llext
subsystem. This will allow to fully decouple the architecture type from
the kind of binary object that is expected by the loader.
The defaults have been chosen to match the current behavior of the ARM
and Xtensa architectures, but developers can now more easily experiment
with other object types.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
DisableDeepSleepIRQ() disables the NVIC irq, while PINT need it to fire an
event when the interrupt is used. So while the interrupt is not used in
DeepSleep mode, it should still be available to be used.
Signed-off-by: Hessel van der Molen <hvandermolen@dexels.com>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Block size is a 3-bit value mapping values [0, 6] to powers of 2 in the
range [16, 1024]. Value 7 is invalid.
The previous formula was not working in case the client's preferred size
was 4 (or more) times bigger than the server's.
This commit takes into account also the case the client's preferred size
is smaller than the server's.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
It's needless complexity, and the terminology clashes with
Bluetooth (HCI frags).
It has one user, IPSP, that is going away soon.
Removing frag support will allow a future optimization, removing the
need for HCI and L2CAP fragment buffer pools, saving memory.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Iterate over all instances to get the information about extended
feature support in SPIM driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add test which is using one SPI master and one SPI slave instance.
There is already a loopback test for SPI master so this test is
focusing on SPI slave API. Test requires 4 pairs of GPIO pins
shortened together. One set of pins is used by SPI master and
one for SPI slave.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added arduino pin definition for nRF5340 audio DK network core,
so we can use nrf21540-ek easily with SDC.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
