The codecs used for the bap bt_bap_stream_config was only
valid for the lifetime of the procedure, which meant
that by the end of the procedure the stream->codec_cfg
became invalid.
This is fixed by using the pointer provided to the
CAP API, and documentating the lifetime of the codec_cfg.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
IGMP queries sent out by a proxy querier can have
a source IP address 0.0.0.0
Allow these incoming packets.
Fixes#69917
Signed-off-by: Savin Weeraratne <savin.weeraratne@audinate.com>
When we receive Router Advertisement with life time,
we will add this as default router, like typing command "net iface"
and has show below
IPv6 default router :
fe80:xxxx::xxxx
When this default router is backend A and
we ping backend B with link local address,
we will use default router A and send echo request
to backend A instead of B, which will receive Redirect and no reply.
Fix it by link local address does not check route.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
When calling `mesh prov beacon-listen on` shell command before
provisioning the local device, the stack won't report unprovisioned
beacons. This is because the scanner has not been started yet. This
behavior confuses users. Print a warning that the device needs to be
provisioned first before it can listen to unprovisioned beacons.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
In the simulated bsim boards there is no jittery delay
from a (D)PPI event until a TIMER starts.
The timer starts instantaneously so we do not need to
compensate for it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The building error is reported in Ubuntu if
CONFIG_NET_BUF_LOG is true.
Change __line__ to __LINE__ to fix building
error.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Use the HAL always when setting the TIMERs CC registers,
(also for coded Phy) to ensure things work properly for simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add HCI input parameter validation according to spec for passing
qualification tests.
- Conditional compile of LE Set PA Receive Enable feature
- Store BIGinfo encryption state and number of streams
- Do not report BIGinfo if phy is invalid or unsupported
- Return disallowed ll_read_iso_tx_sync uses sync recever handle
- Validate BIS indices in ll_big_sync_create
Signed-off-by: Morten Priess <mtpr@oticon.com>
Debug logs in helper functions like tcp_unsent_len() or
tcp_window_full() are not very helpful and generate a heavy, unnecessary
log output. Therefore, tcp_unsent_len() will no longer generate log, and
tcp_window_full() will print out a log only when the window is actually
full, which could be an useful information.
Also, reduce the log load during TX, as currently redundant logs were
printed in tcp_out_ext(), tcp_send_process_no_lock() and finally in
tcp_send().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If send the igmp packet when lower interface is down, the packet will be
freed twice and show error log. Remove the net_pkt_unref in igmp_send(),
and let the caller free it.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Zperf upload multicast always use default interface.
Zperf download multicast cannot receive packets from other than
224.0.0.1 which is default multicast group.
Add zperf upload/download option -I <interface name> for multicast.
So that user can select interface for multicast.
Add join multicast group for zperf download.
Use the "device list" command to get the interface name as
follows:
"- ua (READY)" #uAP interface name
"- ml (READY)" #STA interface name
Multicast traffic commands:
zperf udp upload -a -I ua 224.0.0.2 5001 10 1470 1M
zperf udp download -I ua 5001 224.0.0.3
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Fix compilation warning due to taking member from a packed structure
and assigning it to a pointer. Compiler warns that it may be
unaligned. However, it is ensured that it will be aligned by
operations preceding this assignment.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A lot of the log messages are using highest level, optimize
them to recycle as much messages as possible.
When building the sample with `CONFIG_HAWKBIT_LOG_LEVEL_DBG`
on `frdm_k64f`, the FLASH size is reduced from 150860 B to
150048 B, saving ~800 bytes.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fix CIS accepted by Host being failed in the Controller with
reason 0x20 Unsupported LL Parameter Value, by relaxing the
check that the ACL connection is sufficiently placed such
that the time reservation using in the Controller
implementation does not overlap with the CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to reduce dns resolve requests when using the dns
resolver an optional cache was introduced. This cache
retains query requests for the TTL duration and therefore
prevents premature refetching of DNS RRs.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Implement the ALPN Support for Mqtt Library allow mqtt to have
ability to utilize ALPN for connect to server that support ALPN, such
as AWS IoT Core
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
The opval argument of arch_elf_relocate() was modified by
adding the value stored at opaddr before passing it to
arch_elf_relocate(). This presumed that the addend would
always be stored as a raw value at opaddr, which is not the
case for all relocation types.
This PR modifies opval to be the absolute address of opval,
and moves the addition of the addend from llext_link_plt()
to the implementation of arch_elf_relocate().
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
This commit applies the issues detected in UDP to recv_raw() as
well. Please refer to the previous commit log for details.
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
When receiving a UDP packet, net_conn_input() searches for a
matching connection within `conn_used`.
However, when receiving UDP packets simultaneously from multiple
clients, we may encounter a situation where the connection that was
supposed to be bound cannot be found within `conn_used`, and raise
the ICMP error.
This is because, within recv_udp(), to avoid the failure of
bind_default(), we temporarily remove it from `conn_used` using
net_conn_unregister().
If the context already has a connection handler, it means it's
already registered. In that case, all we have to do is 1) update
the callback registered in the net_context and 2) update the
user_data and remote address and port using net_conn_update().
Fixes#70020
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
This commit adds the new internal function for update the callback,
user data, remote address, and port for a registered connection
handle.
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
This commit adds the new static function for change the remote
address and port to connection, and replaces the changing process
for remote address and port in net_conn_register().
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
The net_conn_change_callback() is not currently being called by
anyone, so this commit moves to static function, and replaces
the change callback parameter process in net_conn_register().
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
The mutex was removed in tcp_recv() where it doesn't seem
to be needed anymore as tcp_conn_search() got
tcp_mutex. In the other areas the tcp_mutex was
narrowed down to protect only the list.
Signed-off-by: Daniel Nejezchleb <dnejezchleb@hwg.cz>
During stress test with WiFi connect, disconnect, ping and throughput
traffic, ARP table updating failed issue may occur.
In arp_prepare(), if packet allocate failed, should add the arp
entry back to arp_free_entries, to avoid this entry is leak forever.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For command zperf udp download 5001 192.168.10.1,
zperf will bind both ipv4 and ipv6 sockets on ipv4 address.
But bind ipv6 socket will fail, thus command return fail.
Fix it by check ip address when zperf download.
For ipv4 address only bind ipv4 socket.
For ipv6 address only bind ipv6 socket.
For unspecific address bind both ipv4 and ipv6 sockets.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add checks for vendor specific data path in ULL and HCI driver, to
enable use of vendor data path for BIS reception.
Signed-off-by: Morten Priess <mtpr@oticon.com>
- Calculate broadcaster channel for control subevent
- Calculate sync receiver channel for control subevent
- Fix broadcast CSTF only set in first subevent
- Remove ctrl_chan_use from LLL, as there is no longer a reason for
storing it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Update the legacy low latency variant of the ticker
implementation to skip to next periodic interval when
ticks to expire is behind the current tick. This makes
the low latency variant of the implementation consistent
with the default ticker implementation.
Also, cleanup conditional compiles in the implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
My recent change overlooked this configuration, which is not tested in CI
currently.
If someone had enabled it, they would've just gotten an unfixable assert.
The correct test would be checking if the current thread is the system wq,
but I think the compiler can't know that and can't remove the "dead" code.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add new commands to manage the Encrypted Advertising Data feature.
Overview of those new commands:
- `bt encrypted-ad set-keys`: set key materials (session key and
initialisation vector) used for encrypted and decryption of EAD;
- `bt encrypted-ad add-ad`: store a given advertising data structure;
- `bt encrypted-ad add-ead`: encrypt the given advertising data
structres and store the generated AD structure;
- `bt encrypted-ad commit-ad`: set the AD of the selected advertiser
with the stored AD;
- `bt encrypted-ad clear-ad`: remove all stored AD;
- `bt encrypted-ad decrypt-scan`: decrypt data using the previously set
key materials when receiving AD with type `0x31`.
The documentation of the Bluetooth Shell has been updated to include
those new commands.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
On some content-types, it might be impossible to
send strings with size of zero.
Therefore empty URI should also allow cases
where strlen() is zero.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When the AUX_ADV_IND and AUX_SYNC_IND are close to each
other, the duration between them is not sufficient to
schedule a new instance of ticker to establish
synchronization. This processing time introduces latencies
detected by the prepare callback.
When the sync offset is low, schedule the start of the
reception to next periodic interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing PPI to timer start compensation and missing
inclusion of range delay in the calculation of packet
header receive timeout value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Parameter check to exclude legacy
high duty cycle directed advertising from validating the
intervals as advertising interval parameter values are not
applicable for high duty cycle directed advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If no callbacks have been registered then callback_list
is NULL, in which case we can skip searching.
This also fixes a NULL-pointer acces in the while loop
as previous_callback would be NULL when it gets
dereferenced as previous_callback->_next.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BIGinfo PDU bitsets were not accessed in a portable maner for
endianness independence, and need to be handled as bit-manipulations.
Add utility functions to access PDU bitset variables independent of
endianness. Use macros to abstract the offsets and widths.
Conversion of BIG_Handle to LE in HCI layer incorrectly use
sys_cpu_to_le16, which fail because target type is 8-bit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fixes commit a9a82d557c ("llext: use elf_rela_t instead of elf_rel_t")
Also switch sign of (unused?) `r_addend` to unsigned.
https://refspecs.linuxfoundation.org/elf/gabi4+/ch4.reloc.html
Issue found thanks to the following warnings when compiling in 64bits:
```
/__w/zephyr/zephyr/include/zephyr/llext/elf.h:349:29: error:
right shift count >= width of type [-Werror=shift-count-overflow]
349 | #define ELF64_R_SYM(i) ((i) >> 32)
```
The name `elf64_word` was admittedly confusing.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Note `elf64_addr` and friends are defined as uint64_t which is defined
as `long long unsigned` which is for some reason different from
`size_t`. So they all require a cast.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
