Updates Ethernet PHY devicetree bindings to be more consistent with
Linux by using the standard `reg` property for the PHY address instead
of a custom `address` property. As a result, MDIO controller bindings
now require standard `#address-cells` and `#size-cells` properties.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
The test is for intc_plic only, so move them into the
intc_plic folder.
Also cleaned up the testcase.yaml a bit while I'm at it
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Many boards do not build properly if UART_ASYNC_API
is enabled, which is causing an overly large list
of targets to exclude for the
build_all.modem.modem_cellular.build test suite.
This commit instead specifies 4 emulated boards, two
of 32-bit, two of 64-bit instead.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Some dependencies where missing from the build_all test
for the modem_cellular.c driver. These have been added.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Introduce support for Texas Instruments TMAG5170
high-precision linear 3D Hall-effect SPI sensor.
This driver allows to configure measurements on
magnetic and temperature channels. It is also
possible to read rotation of the magnet.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
Adds initial support for hm330x dust sensor series. Allows to read PM1,
PM2.5 and PM10 concentrations in atmospheric environment. A further
update to the driver may add support for also reading "standard" CF1
concentrations by exposing of a custom sensor attribute or a Kconfig
option. Tested with Grove - Laser PM2.5 Sensor (HM3301) attached to a
Wio Terminal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update the code in the generic test to work with the updated sensor
decoder API that retrieves data vertically by channel.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
This commit adds Kconfig variables to configure ADLTC2990. This commit adds
basic driver code for analog devices ltc2990 sensor.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Increase the rodata section for build_all/adc to
successfully build on the platform atsame54_xpro.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Moved the interrupt handling code from a bus-specific binding file to
the parent binding file. This modification ensures that interrupt
handling, which is inherently independent of the type of BUS used
(either i2c or spi), is located in the appropriate location within
the code.
Previously, this code was found in a bus-specific file, despite its
functionality being applicable to all buses. This change ensures a
more logical placement and will help to maintain coherence within the
codebase.
This change aligns with the existing implementation where the interrupt
handling code already operates independently of the BUS type.
Tested this on a nrf52840 with a bmi270 on spi bus with the sample from
zephyr/samples/sensor/bmi270 by adding an interrupt handler in main.c
which uses the bmi270_trigger.c implementation and verified this with
breakpoints and log output.
Added the irq-gpios to tests/drivers/build_all/sensor/i2c.dtsi and
tests/drivers/build_all/sensor/spi.dtsi and fixed whitespace formatting.
Fixes: #58843
Signed-off-by: Andreas Wiesinger <awiesing90@gmail.com>
The Nuvoton NCT38xx is a multi-function device providing a TCPC
controller and a I/O expander (GPIO driver). Add a multi-function
driver to manage exclusive access to the device.
Tested with "twister -T tests/drivers/build_all/gpio".
Signed-off-by: Keith Short <keithshort@google.com>
All generic drivers, ie, emulators/SPI/I2C based devices, were defined
in app.overlay, meaning the overlay is picked by all builds. However,
what was defined in app.overlay was only used by the native_posix build.
This will save some CI time, as generic drivers were being built more
than strictly necessary.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Allow use of multiple mb85rc frams at contiguous i2c addresses as a single
big fram module.
Tested on mb85rc1mt used as two 32K modules, where the first one was at
mb85rc1mt's first i2c address and the second one at mb85rc1mt's second i2c
address.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Add modem_cellular driver to build_all. Since the driver
is generic, supporting 4 different modems, it builds an
instance for all 4 as they exist in the devicetree.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
AXP192 is a small power management IC, that also
features 5 GPIOS.
Besides GPIO driver this commit also includes needed modifications
in axp192 regulator and mfd driver as LDOIO0 functioanlity
is multiplexed with GPIO0 pin.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
This adds support for the max1125x (max11254, max11254)
family of spi adc devices.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
This change introduces a new PWM driver for all CC13/26xx SoC.
See the documentation in ti,cc13xx-cc26xx-timer-pwm.yaml for detailed
usage instructions.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
As the cadence uart, has no off-the-shelve microprocessor out there.
Add a build only test case for the cadence uart using the qemu cortex
m3 as the board.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The controller and the driver support two hardware configurations:
- one three-channel (RGB) LED
- or three single-channel LEDs
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
Add nodes for all new devices supported by the updated lp50xx driver to
get these enabled as part of the build test.
Based on initial work from:
- Marek Janus <marek.janus@grinn-global.com>
- Rico Ganahl <rico.ganahl@bytesatwork.ch>
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
This test was turned off last weekend when a sensor misbehaved and broke
the CI, but that issue was resolved in #61016. This PR turns the test
back on.
For more info on what this test does, please see #60394.
For more context see also the comments under #60959
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Drop a bunch of redundant `status = "okay"` entries. These have been
added in 613c32b03f together with few other tweaks, but are not really
needed as nodes are enabled by default.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
A recent modification to the `build_all/sensor` testsuite changed
`build-only` to `false` in `testcase.yaml`, which is causing CI
to go bonkers.
https://bit.ly/3rSe0Te
Do not run build-only testsuites.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This PR introduces a backend API to be implemented by sensor emulators
that creates a standardized mechanism for setting expected sensor
readings in tests. This unlocks the ability to create a generic sensor
test that can automatically set expected values in supported sensor
emulators and verify them through the existing sensor API. An
implementation of this API is provided for the AKM09918C magnetometer.
A generic sensor test is also created to exercise this implementation.
Observe that this test knows nothing about the AKM09918C; info about
supported channels and sample ranges is discovered through the backend
API. The test iterates over all devices attached to the virtual I2C and
SPI buses in the test binary's device tree, which (theoretically) covers
all sensors. Sensors whose emulator does not exist yet or does not
support the backend API are skipped.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Added a driver for the DFRobot A01NYUB distance sensor. This sensor
sends its readings via UART at 9600 baud. This driver uses interrupts
to read the data from the sensor.
Signed-off-by: Oliver King <oliver.king@steadconnect.com>
Previously the driver was retrofitted to the kscan api, handling it as a
input device with one row and three columns. With the move to the input
subsystem each input can have its proper input code instead.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
