Iterate through I2C addresses in devicetree overlay
for build_all/gpio to avoid conflicts.
Fixes#69551
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add driver for ScioSense ENS160 multi-gas sensor. The driver includes
support for I2C and SPI, attributes for setting temperature and
humidity compensation and data ready trigger.
Also add ScioSense to the list of vendor prefixes.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
The test is configured to replace the config rather than extending,
resulting in a build with CONFIG_DISPLAY=n and the driver not being
actually built.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert ili9xxx display drivers to use MIPI DBI API. Due to the fact
this change requires a new devicetree structure for the display driver
to build, required devicetree changes are also included in this commit
for all boards and shields defining an instance of an ili9xxx display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The LIS2DE12 is an ultra-low-power high- performance three-axis
linear accelerometer belonging to the “femto” family with digital
I2C/SPI serial interface standard output.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lis2de12.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Ensure WiFi modems still build with the `CONNECTIVITY_WIFI_MGMT`
connectivity backend enabled.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit adds source and header files required for bmp581 I2C driver.
I have used bmp581_user.h to add more usage related definitions
but bmp581.h to add hardware related definitions.
Signed-off-by: Talha Can Havadar <havadartalha@gmail.com>
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
Change the gpio_qdec driver to support optical encoders.
Add a property to use for defining an arbitrary number of GPIOs for the
sensing devices (typically infrared LEDs, but could also be the
biasing for the phototransistor), and one for adding a delay between
turning those on and reading the pin status.
The infrared LEDs typically consume a non negligible amount of power, so
there's also a new idle-poll-time-us property that enables two possible
modes of operation:
- if idle-poll-time-us is zero (default) the LEDs are enabled all the
time and the driver enters polling mode using the GPIO interrupt as
with mechanical encoders. This is usable for mains powered devices and
has the lowest overhead on the CPU.
- if idle-poll-time-us is non zero, then the driver polls the encoder
all the time, turning on the LEDs just before reading the state and
shutting them off immediately after, but when the encoder is idle it
switches the polling rate to idle-poll-time-us to save power, and only
polls at sample-time-us when some movement is detected.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Remove the net tag, allowing the modem driver tests to be built
for PRs, and limit the scope of the test suite to only build
for select emulated 32 and 64 bit boards.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Adding driver for GC9A01A 240x240 based LCD displays.
Should be working with GC9C01 as well (untested).
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
Update the backend for sensor emulators to include a function for
setting the offset as well as a function to query an attribute's
metadata such as bounds and increment size. Additionally, add
backend support for setting the _xyz channel values.
Make the appropriate test changes to accomodate.
Signed-off-by: Yuval Peress <peress@google.com>
This is a driver targetting the Bosch BMA 4-series accelerometers. It
has been specifically developed for the BMA422 but should be compatible
with others in that line, excepting the BMA400. Supports key attributes
and async RTIO one-shot operation. I2C operation is supported, with
stubs for a SPI implementation provided for future improvement.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Some MCU have limitations with GPIO interrupts. Add a polling mode to
the gpio-keys driver to support those cases.
This required a bit of a refactoring of the driver data structure to add
a instance wide data, and move the pin specific pointer in the config
structure.
For polling, reuse the button 0 delayed work so we minimize the resource
waste, the two work handler functions are only referenced when used so
at least those are discarded automatically if no instance needs them.
Fix a bug in the PM structure instantiation as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add an input driver to read data from an analog device, such as a
thumbstick, connected to an ADC channel, and report it as an input
device.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Use the common io-channel-cells name "input" instead of "positive" and
"negative" to make this binding work with the various ADC DT macros.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The zephyr-gpio w1 driver introduced in this commit implements
all routines for the w1 api on top of the zephyr gpio driver.
W1 bit read, write, and reset operations are executed by
bit-banging the selected gpio.
Signed-off-by: Hudson C. Dalpra <hudson@bduncanltd.com>
Add a device driver to read events from a Linux evdev device node and
inject them back as Zephyr input events.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The LIS2DU12 is a linear 3-axis accelerometer with advanced digital
functions whose MEMS and ASIC have been expressly designed to build
an outstanding ultralow-power architecture in which the anti-aliasing
filter operates with a current consumption among the lowest in the
market.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lis2du12.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add test case for all drivers that are supporting the die temperature
feature, and fix right away all the yet undiscovered issues.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Rename the native Linux SocketCAN driver to reflect that it can can now be
used in both native_posix and native_sim (with or without an embedded
C-library).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add an optional actual-key-mask property to filter out key combinations
that are not implemented in the actual keyboard matrix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The driver has some non trivial macro setup, add another two test cases
so those gets build tested as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The LPS28DFW is an ultracompact, piezoresistive, absolute pressure sensor.
Compared to the LPS22DF, the LPS28DFW is waterproof and has a Dual FS
capability and does not have SPI. This commit extends the LPS22DF driver to
be compatible with the LPS28DFW device.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Clean up few build all device instances to use the test_gpio node and
different gpio numbers. Makes them somewhat more representative of what
an actual instance would look like.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
