Increased the default number of TX and RX buffer descriptors from 4 to
16. Since the current default buffer size (CONFIG_NET_BUF_DATA_SIZE) is
128, increasing the number of RX buffers is needed to be able to receive
at least one frame of a maximum size split between multiple buffers.
The default number of TX buffers was increased to match the number of RX
buffers and to be able to transmit large frames with many fragments.
Added build-time configuration validation to ensure that the combined
size of all RX buffers is sufficient to receive a maximum-sized Ethernet
frame.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
DMA copies frames which cannot fit into a single buffer into
multiple receive buffers. Updated the receiving code to combine
these buffers into a net_pkt with multiple fragments.
This allows the driver to handle larger Ethernet frames that
span across multiple DMA buffers.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Always reading from descriptor with index 0 could cause processing
of the buffers in a different order than they were received. Fixed by
reading from the next unprocessed position in the ring of descriptors
instead.
Fixed unused variable warnings.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add test case verifying that offloaded DNS APIs are called as expected
and that enabling/disabling DNS offloading at runtime works.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new socket offloading functions, allowing to enable/disable
offloaded DNS implementation at runtime. This may be useful if there is
a mix of offloaded/native network interfaces in the system, so the
application can choose which DNS backend to use.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a new "if_name" pointer to the transport configuration structure,
allowing the application to bind MQTT client to a specific network
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implemented unit tests for the crc4 and crc4_ti functions as they were
missed when they were introduced
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In the function `sdp_client_ss_search()` and
`sdp_client_ssa_search()`, the allocated buf is not released if the
required UUID is invalid.
Un-reference the allocated net buffer if the UUID is invalid.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Although xt-clang is based on clang, for some reason, it still
lists xcc system include path as the first search path (e.g.
for stddef.h), and the clang system include path as last. This
creates a big issue when the code starts to use any standards
past C89 (since xcc is based on GCC 4.2). We can use compiler
property nostdin_include to add -isystem to compiler options.
However, some modules (e.g. picolibcs) somehow ignore this.
So we also need to forcibly do add_compile_options() to make
sure the clang system include path is placed before the xcc
system include path.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa toolchain xt-clang needs similar treatment to xcc in
terms of nostdinc and nostdinc_include, so add it to the if
block to exclude these by default.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some tests explicitly test for deprecated functions and they
override the macro __deprecated to avoid compiler warnings.
So, for xcc/xt-clang, only define __deprecated if it has not
already been defined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since compiler options are unconditionally passed to the script,
we may pass arguments that are not recognized. So we change to
only parse known arguments. Currently, it only cares about -l,
which is related to linking libraries.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added automatic KMU key provisioning, when keyfile.json
file exists in the build directory.
This enables automated key provisioning during the
flashing process to enable testing nRF54L aplications using Twister.
Only applicable on nrfutil runner.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add support to use DMA mode with cc23x0 AES module. This consists in
specifying the DMA channels and peripherals.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Two DMA channels are assigned to AES channels A and B respectively.
Each channel A/B has an interface to control the conditions that will
generate requests on the related DMA channel: trigger condition,
R/W address, and DMA done action.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
The CYW43xxx for Infineon Controllers stops after the first LauncRAM
command. Newer Controllers like the CYW5557x update the firmware in
multiple stages, which is supported by this commit.
Signed-off-by: Matthias Ringwald <matthias@ringwald.ch>
Added nxp spsdk as west runner.
Secure Provisioning SDK (SPSDK) is a unified, reliable,
and easy to use Python SDK library working across the
NXP MCU portfolio providing a strong foundation from
quick customer prototyping up to production deployment.
Docs: https://spsdk.readthedocs.io
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Secure Provisioning SDK (SPSDK) is a unified, reliable,
and easy to use Python SDK library working across the
NXP MCU portfolio providing a strong foundation from
quick customer prototyping up to production deployment.
Docs: https://spsdk.readthedocs.io
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
When the network interface goes down, we call
net_ipv4_autoconf_reset() which removes the autoaddress
from the network interface.
The net_ipv4_autoconf_reset() is also called when ACD is started
in which case we could see this error message
<dbg> net_if_start_acd: Starting ACD for iface 2
<err> net_if: iface 2 addr 169.254.174.230 (net_if_ipv4_addr_rm():4625)
<dbg> net_if_ipv4_addr_rm: Address 169.254.174.230 not found (-22)
This error is superfluous and not needed. So before trying to
remove the address, check if the interface already has it set and
only then remove it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When adding IPv4 address to the network interface, there is no
need to start ACD procedure for localhost or point-to-point links.
The ACD start function would mark the IP address like 127.0.0.1 as
tentative and never make it preferred which would then cause issues
when selecting the network address for sending.
As the ACD start is also called when the network interface comes up,
add the localhost and point-to-point link check to ACD start function
so that we will avoid ACD checks in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The hex2char() calls in bin2hex() can never fail since buf[i] >> 4
and buf[i] & 0xf always produce values in range 0-15.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
While SPDX license identifiers are usually considered to be
case-insensitive, matching the case of the canonical identifier is
recommended by the SPDX specification.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
make sure that autonegotiation is restarted, after
changing the speeds. Also make sure to only write
the changed registers, as mdio is pretty slow.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
When compiling with sysbuild and IPC the samples would use the
nrf5340_cpunet_iso-bt_ll_sw_split.conf config file, which was
incompatible with the sample's host configuration.
Instead of using the ISO configuration file, define a hci_ipc
overlay in each sample with the necessary configurations
that support all host configurations.
This commit also updates the sample.yaml files to split
configurations for single- and multicore builds, as what
needs to be configured for each type is different.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
remove phy related configs from eth config.
phy related configs chould go directly into the phy.
Most ethernet drivers didn't support the now removed
functions yet. Users should instead use `phy_configure_link()`
together with the `net_eth_get_phy()` function.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Newer AIROC controllers like the CYW55573 don't support changing the
baudrate in Download Mode. However, a higher baud rate can be used
directly to sent HCI Reset.
This commit adds the KConfig flag CONFIG_AIROC_DOWNLOAD_MODE to enable
the new behaviour.
Signed-off-by: Matthias Ringwald <matthias@ringwald.ch>
This reverts commit 28bd478a0b.
This commit can be reverted as the cause of test failure
has been removed in ipc service by increasing workqueue stack size.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
