Some modems supports multiple access technologies.
The access technology of the serving cell can be extracted from the
+CEREG command, which is already sent to the modem.
The parse function is extended to also parse the access technology value.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/51153.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The most of the wwdg peripherals requires a reduced apb clock
to pass the sample.drivers.watchdog.stm32_wwdg testcase.
This apb1 prescaler is added to the overlay file
for that particular clock.
Specific overlay for the stm32h7 family because of the APB1
bus clock named d2ppre1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Fix incorrect struct fields documentation (`@param` can't be used)
- Removed redundant `@file` entry, public APIs may be split into
multiple headers.
- Grouped and anchored options and flags, so they can be referenced.
- Guarded some internal fields with INTERNAL_HIDDEN.
- Exposed conditional struct fields, using __DOXYGEN__.
- Use `@see` in cases where used was instructed to look at other
function calls.
- Added `errno` `@retval` to all functions. In case of external
watchdogs, communication errors may be propagated.
- Other minor/typo fixes
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This moves the CMD_SET_DLF command macro to public header
so application can use it without weird include path to
include the "private" header file under drivers/serial.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Ensure that PECI block is enabled in the EC Subsystem by clearing
the PECI_DIS (peci disable) register
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Move regs configuration from previous pinmux.c to soc layer.
This involves the debug interface, configuring the GPIO bank power
and the test clock out pin.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Sort SoC nodes by address to make it easier to find them. As part
of this also move the intel-sha node under SoC where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
File was including zephyr/types.h and zephyr/drivers/gpio.h for nothing,
and missed zephyr/device.h
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Remove redundant `@file`
- Hide driver-specific code using `INTERNAL_HIDDEN`.
- Use standard `@funcprops`
- Use `@retval` for return codes, and clarify them as well. Added -errno
case, since external regulators may propagate e.g. bus errors.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Attempts to clarify the memory map on the MPS2 AN521, showing how
the 4MB code region and 4MB SRAM region are partitioned across the
various board targets.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
The board already provides a pinctrl setup for UART1, the documentation
assumes it does not. This patch updates the documentation to explain how
to apply an overlay so that UART1 is routed to another set of pins.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After merging #51809, a few things were spotted that needed tweaking.
Among them:
- Rename the folder from bt_crypto to crypto, since the prefix is
unnecesary
- Remove the include folder
- Remove the path from the global include paths
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
RT1060 board with hyperflash configuration was missing the appropriate
flash configuration block required by the bootloader. Since this board
uses the same flash chip as the RT1050, the flash configuration block for
that board can be reused.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update NXP boards that use flashless SOCs to include flash data
configuration blocks, as well as device configuration blocks where
required. These configuration blocks are used by the bootloader.
Although the files themselves are stored in NXP's HAL, CMake directives
are used to include them directly, and notify the user of their
existence when a new board is created, to aid in the bringup process.
This commit updates the revision of the NXP HAL to one that does not
include flash data configuration blocks, to prevent linker errors.
Note that due to merge order in the NXP HAL, the updated SHA will also
include NXP's S32 System Timer Module drivers.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Only include fsl_flexspi_nor_boot when a boot header is present,
as this is the only case where the boot header data will be required.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Incorrectly hash_checksum_mgmt_handler_fn has been referenced
in documentation for hash_checksum_mgmt_list_cb, causing
documentation generation error, because parameter list does
not match.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The heap size for serial dump of gcov data is currently
defined by MALLOC_MAX_HEAP_SIZE, which cannot be
adjusted by kconfig. This commit adds a new kconfig
option, CONFIG_COVERAGE_GCOV_HEAP_SIZE, which retains
the behavior or MALLOC_MAX_HEAP_SIZE by default.
Signed-off-by: Jason Wright <jwright@synchron.com>
Rounded up struct smp_bt_user_data takes 8 bytes; this fixes
static assert failing with message:
CONFIG_MCUMGR_BUF_USER_DATA_SIZE not large enough to fit Bluetooth
user data
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds details of the stable API change to mcumgr's callback system,
including a link to the migration guide.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds the initial documentation describing the mcumgr callback
system and how to use it, including API reference and samples.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Switches to the new event callback system for the os_mgmt
functionality and removes the old code.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Switches to the new event callback system for the img_mgmt
functionality and removes the old code.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Switches to the new event callback system for the fs_mgmt
functionality and removes the old code.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds an access denied error code that can be used to signal to the
mcumgr client that the requested access to a specific resource or
command/functionality has been denied.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Reworks the event callback system to use a linked list to allow for
chained handlers and support passing a status back to the handler to
indicate if the request should be rejected or allowed. This also
removes the old base callback functionality.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Following the modification of the STM32 OSPI driver, the clock-names
binding is now required
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Instead of calling __HAL_RCC_OSPIM_CLK_ENABLE() to enable the OSPI
manager clock, we now use a new clock binding in the dts.
In order to avoid confusion between the different clocks, the driver
is modified to select the clock based on their names instead of indexes.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
For all STM32 featuring octospi, clock-names are added to use them
instead of indexing for configuring the clock.
For U5 series, a third clock is added for the OSPI manager.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Update release notes 3.3 with the different modifications brought
to the STM32 RTC counter including new functionality, deprecated
and removed Kconfig
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Remove a set of Kconfig symbols for configuring the RTC on STM32
that are no longer useful
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
For all STM32 series, add some defines to select the RTC clock source.
This change is necessary to be able to select the RTC clock source in
dts instead of Kconfig
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
This add TFM cmake definitions to build mass storage sample for non
secure firmware boards versions. The stm32l562e_dk_ns board was used
to demonstrate. It uses SDMMC/SD with TFM profile large. Tests were
conducted using a 2GB transflash card with FAT-32 partition.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This enables usb and usb_device tag for tests. It explicitly disable
samples/subsys/usb/dfu for non-secure version of this board due to
building errors, which can be explored in future.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Adds a note on changes needed to applications to update them for
changes introduced into MCUmgr.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
After a soft-reset of the host controller the flash device is not reset.
This can cause the flash device to still be busy writing or erasing when
the host controller boots and initializes the flash. The often results
in errors and the flash device not being initialized.
This fix polls the status register until the WIP flag is off before
initializing the flash device.
Fixes#51713
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Adds a test which checks that the fs_mgmt supported hash/checksum
functionality is working and returns the expected response.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a new mcumgr command for returning information on all supported
hash/checksum types that the firmware supports.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This fixes issues with the Bluetooth SMP transport whereby deadlocks
could arise from connection references being held in long-lasting
mcumgr command processing functions.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This replaces an intermediatory structure with a different one which
allows command functions to access the full contents of the streamer
structure that would be otherwise unavailable. This is a foundation
for allowing asynchronous mcumgr messages from the server.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
