Add CSMA CA capability for the `ieee802154_nrf5` radio driver along with
appropriate implementation in the `nrf5_tx` function.
Introduce 802.15.4 radio driver with CSMA/CA support enabled. Add help
text, mentioning a list of peripherals occupied by the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Convert driver to utilize the new DT_INST macros completely and remove
associated Kconfig symbols that now come from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using DT_NODELABEL to get references to specific GPIO ports on
various boards that utilize the arm,cmsdk-gpio controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using DT_NODELABEL to get references to determine if specific
GPIO ports are enabled in the beetle SoC code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make the label property required for "arm,cmsdk-gpio" compatible
nodes. Update binding to mark the 'label' property required and updated
associated .dts files to add a 'label' property if it didn't exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ft5336 has an interrupt that can be used instead of polling
this commit adds support for using it but as an option to maintain
compatibility. Tested on the stm32f746g_disco board.
Signed-off-by: Mark Olsson <mark@markolsson.se>
Run the int_literal_to_timeout Coccinelle script to fix places where
it is clear that an integer duration is being passed where a timeout
value is required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace timeout parameters that are multiples of MSEC_PER_SEC, or such
a value passed through K_MSEC, with the normalized timeout expression
using whole seconds.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Recent timeout rework reverted the interpretation of the delay
parameter to K_THREAD_DEFINE from a timeout to a count in
milliseconds, although the corresponding parameter in the
k_thread_create() function remains a timeout. Convert timeout
expressions to millisecond durations where necessary.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Most places used an int so that should have handled most cases but
keys_set was using an unsigned int, which meant that checking len > 0
is an expression that is always false, and the error handling is not
working.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implemented blocking OpenThread otPlatRadioGetRssi api function using
no-blocking energy scan function from radio driver api interface.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
The publication context is checked for NULL in bt_mesh_model_publish()
however it was dereferenced before that. Move the assignment to
ctx.send_rel to the same place where other ctx members are set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Recent stm32 gpio driver changed removed the per port Kconfig symbols.
We had a type in flight issue in which the stm32l422xx got added and set
GPIO_STM32_PORTH. Just remove the Kconfig symbol as its not needed
anymore to fix build issues.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently supported nRF SoCs featuring the second GPIO port (P1) do not
have all 32 pins implemented in that port. Add the "ngpios" property
in gpio1 nodes for these SoCs, so that they don't take the default
value of 32 to indicate the number of available pins but use instead:
- 10 for nRF52833
- 16 for nRF52840
- 16 for nRF5340 (both application and network core)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use device node declaration instead.
Clean up GPIO_STM32_PORT* Kconfig symbols.
On some boards some gpio ports where disabled using Kconfig symbols.
Disable them now via device tree nodes in boards dts files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Updated sample config to allow emulation of 8-bit write block.
(because the nRF Flash driver has changed its default write block size
to 32-bit aligned)
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Use "nRF9160 DK" throughout. Change the title to "Development Kit" and
introduce the abbreviation there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add support for the STM32L422Xb SoC. Base stm32l422.dtsi on
stm32l412.dtsi to be able to add the crypto device later.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move towards use DTS for driver instance name instead of Kconfig sybmol.
This is towards phasing out CONFIG_ENTROPY_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 7832738ae9 ("kernel/timeout: Make timeout arguments an opaque
type") changed the forever value for timer drivers to K_TICKS_FOREVER
from K_FOREVER.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Counting how many times it went suspended, for how long on the last one
and on overage.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
