Add a new coredump query and command type to retrieve the raw data
stored to the flash backend
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If the characteristic is non-writtable, the BT_GATT_CHRC_WRITE property
flag shall be unset. Moreover, threre is no point to set
BT_GATT_PERM_WRITE_ENCRYPT permission flag as well if the attribute has
no `write` callback set anyway.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit adds icache and dcache maintenance functions
for aarch32.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Signed-off-by: Dave Aldridge <quic_daldridg@quicinc.com>
Building lwm2m_client with CONFIG_NET_L2_OPENTHREAD=y leads to
following warning during build:
west build -s samples/net/lwm2m_client -b nrf52840dk_nrf52840 -- \
-DCONFIG_NET_L2_OPENTHREAD=y
zephyr/drivers/sensor/nrf5/temp_nrf5.c:115:10:
warning: zero-length gnu_printf format string [-Wformat-zero-length]
115 | LOG_DBG("");
Signed-off-by: Kiril Petrov <retfie@gmail.com>
CONFIG_SIFIVE_SPI_0_ROM (default y) was an option to disable spi0 if
used to access SPI Flash ROM. However, its design had a problem: it
relied on instance numbers. You had to set status okay for spi0 to make
it work (incongruent with the purpose of the option itself). This patch
makes things simpler: if such SPI0 is not available, simply keep it
disabled in DT. Bindings have been updated to mention this case.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When flash connected to spi0 is used as ROM Flash, it can't be
instantiated. spi0 is in fact disabled now with CONFIG_SIFIVE_SPI_0_ROM,
which defaults to y. However, the child flash device is not. This causes
issues with tests relying on `jedec,spi-nor` because they can't find a
parent device.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is not always possible to enable the jedec,spi-nor driver (e.g.
because the SPI controller can't be enabled). This is the case for
HiFive boards. Still, DT can be used for hardware description.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new API used by arch to implement suspend-to-RAM (S2RAM).
The API is composed by a single function to save the CPU context on
suspend.
A CPU context is the arch-specific set of registers that must be
preserved on power-off (in retained RAM) to be able to resume the
execution from the point it was suspended without going through the
whole kernel startup stage.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use logical values of 0/1 for gpio_pin_set_dt and handle any
inversions as GPIO flags that might be required at a board level.
Signed-off-by: Kumar Gala <galak@kernel.org>
The GATT caching feature isn't needed, and was making the memory
consumption blow up because of the recent addition of `long_wq` for
deferred work.
Fixes#47428 .
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Introduce a new RISCV_HAS_CLIC symbol for platforms using CLIC,
reorganize the Kconfigs and make the Nuclei ECLIC depending on the new
symbol.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When switching from Extended Scanning by Extended
Advertising HCI commands back to Legacy Scanning after a
HCI reset it is required that the coded PHY scanning
context is reset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Scanning Address Resolution that incorrectly
checked for Bit Count Comparison which is not to be checked
when explicit resolution is performed in the Rx ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the maximum advertising PDU size time reservation
consider the Advertising Data could be updated from zero to
maximum support size. If maximum time reservation is
disabled then time reservation corresponding to the
Advertising Data present at the time of the start/enable
of Advertising is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertising sets are support then use advanced
scheduling implementation to place multiple auxiliary PDUs
and periodic advertising PDUs in a non-overlapping schedule.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When using the settings subsystem, the data argument argument passed to
flash_stm32_write_range() might not be 8-bytes aligned, causing an
unaligned memory access fault.
Fix that the same way as it was done for the STM32L4 in commit
652efa530f.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that we have 8 bits reserved for vendor specific GPIO flags,
introduce a new set of flags for nRF platforms to configure pins drive
mode. These new flags are equivalent to the previous existing ones, but
use a naming scheme the fits better with vendor hardware capabilities.
The table below shows the equivalence between old and new flag
| Old flags | New flags |
|---------------------------|-----------------------|
| `NRF_GPIO_DS_DFLT_LOW` | `NRF_GPIO_DRIVE_S0` |
| `NRF_GPIO_DS_DFLT_HIGH` | `NRF_GPIO_DRIVE_S1` |
| `NRF_GPIO_DS_ALT_LOW` | `NRF_GPIO_DRIVE_H0` |
| `NRF_GPIO_DS_ALT_HIGH` | `NRF_GPIO_DRIVE_H1` |
| `NRF_GPIO_DS_DFLT` | `NRF_GPIO_DRIVE_S0S1` |
| `NRF_GPIO_DS_ALT` | `NRF_GPIO_DRIVE_H0H1` |
| `NRF_GPIO_DS_DFLT_LOW \|` | `NRF_GPIO_DRIVE_S0H1` |
| `NRF_GPIO_DS_ALT_HIGH` | |
| `NRF_GPIO_DS_ALT_LOW \|` | `NRF_GPIO_DRIVE_H0S1` |
| `NRF_GPIO_DS_DFLT_HIGH` | |
Documentation has been written to explain in more detail the meaning of
the flags and how they can be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The naming of the custom DS flags is not clear for nRF platforms. This
patch removes all the NRF_GPIO_DS* flags. New flags will be
re-introduced in a follow-up commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Optional way for generating symbols file using binutils. This file will
be generated on demand for tests which will then be parsed by twister to
create an accurate test plan from the listed testcase/suites.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the internal power state tracking for `PM_DEVICE_ACTION_TURN_ON`
and `PM_DEVICE_ACTION_TURN_OFF` even when the transition function fails.
Just because the driver couldn't perform some action does not mean the
device is still powered/unpowered.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add state checking to every transition to ensure that the device is in
the state we think it is before running the action.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
A variable set by the user with `-DVAR=<val>` will be given the type
UNINITIALIZED.
This results in the variable not being read into the cmake_cache.
Support reading of CMake cache variables of type UNINITIALIZED.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
In case LWM2M cient wants to change attrs of observed obj,
it needs pointer to client_ctx.
For example:
On observer add, wants to change pmin for some obj path to 1s:
static void observe_cb(enum lwm2m_observe_event event,
struct lwm2m_obj_path *path, void *user_data)
{
struct lwm2m_ctx *ctx = (struct lwm2m_ctx *) user_data;
switch (event) {
case LWM2M_OBSERVE_EVENT_OBSERVER_ADDED:
lwm2m_engine_update_observer_min_period(ctx, "3347", 1);
...
}
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Fix missing recv fifo reset on HCI reset. This fix handles a
scenario where in Rx Prio thread has enqueued a node rx, Tx
thread handles HCI Reset Command, and Rx thread wakes up
from call to k_fifo_get to handle invalid node rx. The
changes here ensure Rx thread does not get any invalid node
rx post HCI Reset Command handled in Tx thread.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a new callback to the Bluetooth Extended Advertising callback
structure. It notifies the application that the RPA validity of the
advertising set has timed out. The user can use this callback to
synchronize the advertising payload update with the RPA rotation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Synced the start of the advertising sets after each RPA rotation
in the Bluetooth identity module.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Following implementation of commit 219d5b5,
and to complement commit 8c4f98d
it is also necessary define _vector_end in
test specific arm-irq-vector-table.ld
Fixes#47273
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Timeout must be increased for fvp_baser_aemv8r_aarch32 board. Enabling
MPU on this board makes simulation slower.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Buffer size must be decreased by one when non-zero to calculate the
right end address, and this must be checked for overflows.
Variables for region limit renamed for clarity since they may be
understood as the raw register values.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
