Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The device_service shell was missing the capability to list devices
registered in the EARLY init level.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Changes in device_service have triggered MISRA 5.7 violation CI error
(Tag name should be unique). Renamed shell to sh, same as some other
modules.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The _SYS_INIT_LEVEL* definitions were used to indicate the index entry
into the levels array defined in init.c (z_sys_init_run_level). init.c
uses this information internally, so there is no point in exposing this
in a public header. It has been replaced with an enum inside init.c. The
device shell was re-using the same defines to index its own array. This
is a fragile design, the shell needs to be responsible of its own data
indexing. A similar situation happened with some unit tests.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
`wait()` returns the retval of `zsock_poll()` which can be
negative but is currently unhandled.
This patch make sure that the error will be handled.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Minor MISRA-related fixes so that the conditionals are boolean
and precedence of statements are explicit.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Tests with shell commands will fail if they are started
before the shell backend is initialized or started.
Adding API function: shell_ready indicating shell readiness.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add option to control formatting of the logging timestamp. By default
formatting is enabled which maintains backward compatibility.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When shell was used as a log backend it did not enabled log_output
module used for string formatting. Adding missing dependency.
Original commit (b0072e1cea) was
reverted, reappling.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Increase deafult value of SHELL_ARGC_MAX configuration.
This allows users to utilize deeper nested shell menus without
risking maxing out the number of allowed arguments.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
When shell was used as a log backend it did not enabled log_output
module used for string formatting. Adding missing dependency.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previous code provided incorrect argc value to handlers when a command
used SHELL_OPT_ARG_RAW option.
Fixes#48380
Signed-off-by: Eric Johnson <eric.johnson2@walgreens.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use `kernel log-level modulename severity`
Also enable it for the Bluetooth Shell.
Then one can compile-in a lot of BT modules like so:
CONFIG_BT_DEBUG_HCI_CORE=y
CONFIG_BT_DEBUG_L2CAP=y
CONFIG_BT_DEBUG_ATT=y
CONFIG_BT_DEBUG_GATT=y
And at runtime select only, e.g. GATT
kernel log-level bt_hci_core 0
kernel log-level bt_l2cap 0
kernel log-level bt_att 0
And then re-enable L2CAP if needed later
kernel log-level bt_l2cap 4
And so on..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When LOG_MODE_IMMEDIATE is used, logs processed by the shell
log backend may be intertwined with messages printed by
shell commands running on the shell thread.
It is because the shell uses a mutex while the shell log
backend uses the IRQ lock for synchronization. Switch the
latter to use the mutex as well whenever it's possible.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Renaming objects which had 2 in the name to indicate that
it is v2 specific. Once logging v1 has been removed such
suffixes are redundant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit corrects all `extern K_KERNEL_STACK_ARRAY_DEFINE` macro
usages to use the `K_KERNEL_STACK_ARRAY_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If CONFIG_SHELL_STATS is disabled, shell->stats is NULL and
must not be dereferenced. Guard against it.
Fixes#44089
Signed-off-by: Alexej Rempel <Alexej.Rempel@de.eckerle-gruppe.com>
If the echo flag is disabled the cmd_buff isn't printed and the
characters in it must not be counted in this function.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixed the issue when sometimes "update" is not called for the
last RXRDY signal. First, need to reset the signal and only
after that need to call the "update" function.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
Added macro SHELL_SUBCMD_SET_CREATE which creates a set of subcommands.
SHELL_SUBCMD_ADD and SHELL_SUBCMD_COND_ADD can be used from any file to
add command to the set. This approach allows to have subcommands added
from multiple files.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When threads are in more than one state at a time, k_thread_state_str()
returns a string that lists each of its states delimited by a '+'.
This in turn necessitates a change to the API that includes both a
pointer to the buffer to use for the string and the size of the buffer.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Commit f7c4fe6778 ("shell: optimize history storage a bit") forgot
to distinguish between the newly allocated history item and the previous
one, causing havoc on ring buffer wraparounds with excess padding.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
When padding is added to "fill" the gap in order to wrap to the
beginning of the ring buffer, such padding is attributed to the
current item being added. Let's attribute it to the previous entry
instead so it'll be freed along with that entry and make the space
available one entry sooner, increasing the chances for keeping the
current entry around longer.
If ring buffer is empty then always reset it up front to get best
alignment right away i.e. beginning of buffer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
As the receive window is now decreased at the TCP module level, other
direct net_context users are also responsible for acknowledging the
received data with net_context_update_recv_wnd() - otherwise, the
communication will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
