The OFLEN bit has to be set by the host driver for ACE2.x. The
ownership of the IP is now handled at the host driver level, no longer
the firmware.
Setting it at the firmware level is a no-op if the bit is already set
by the host driver, and will fail it isn't already set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This patch fixes i2svss field initialisation in Device Tree for LNL
platform. It fixes this bug: #482
Problem is observed only when using SSP_BLOB_VER_1_5 version.
Unfortunatelly this version is not tested in FW validation tests.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Clearing SPA bit together with OFFLEN bit causes FW hang.
This patch changes sequence to avoid that situation.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The upper ssp slot number should be retrieved from configuration
blob to support all possible settings. This patch fix this issue.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Repleace usage of shim2 device tree field with hdamlssp.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In LNL platform GPDMA and ALH is no longer used. SSP uses LINK HDA
as a DMA engine. Therefore new shim, new register definitions and new
programming flows were defined.
This patch implements new SSP programming requirements for LNL.
Since HDA is shared between Host and DSP, link_config field was added to
dai_config structure. This one is provided by Host in new IPC4 fields
during interface configuration.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Ignore the link clock_source for non-ACE platforms instead of throwing
an error when it is set in the topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Since the device need to be first powered-up by the power domain, it has
more sense that device is in off state at the beginning.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Intel SSP configuration can have auxiliary data embedded after it in a
variable length tlv array. Enable the parsing of this data and add the
data structs to describe the contents.
For now add support only for new version 1.5 blob. This is because
legacy blob doesn't have size field to describe its variable size.
Auxiliary data parsing has currently only 1 setting for link clock
needed in ACE platforms.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Add support for newer data blob version 1.5. Refactor the code to re-use
the common register setting. Clock setting will be handled differently
with legacy and version 1.5 blob.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Modify dai_config_get function to have the config struct as argument.
This was not a showstopper but a request in the API review.
In the same patch modify all Intel dai drivers using the API to preserve
bisect/compile.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
On ACE RSE bits should be cleared unconditionally
if ssp is no longer in use
This will allow to successfully disable SSP in
dai_ssp_pm_runtime_dis_ssp_power()
and enable it correctly in the next run
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
The reference count, dp->sref, is never incremented for the SSP DAI as
we use the runtime PM API's to probe/remove the DAI during
resume/suspend. Therefore, use the DAI state to check if the DAI is
active in any direction before proceesing to set the config. This fixes
the IO errors seen during simultaenous playback and capture on the same
SSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Instead of using SoC versions, define the information about base and
extended ports on Kconfig, and use this information from there.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Instead of using version of the SoC, declare on Kconfig the need for it,
and use this information to decide upon enabling the code or not.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Dai index should be added to config as it can be queried by the
application like sof. Also check for dynamically allocated params
when returning the config.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Enable Zephyr device runtime power management mechanisms in Intel SSP
driver. This allows Zephyr to track usage reference for power
domain gating.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
With addition of DAI_TRIGGER_COPY, the trigger callback may
be called at a very high rate.
Reduce the logging level from INF to DBG for the logs in
dai_ssp_trigger().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Intel ADSP CAVS is now a proper series with all CAVS SoCs running under
it. This will give us to Intel ADSP series:
- CAVS
- ACE v1.x
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
