1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This PR fixes: #10195.
Function _vprintk when used cannot parse '*' what
a as result causes dereferencing bad pointer.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Adds getaddrinfo and freeaddrinfo to the offloaded API.
Signed-off-by: Joakim Andre Tønnesen <joakim.tonnesen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_PINS and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled gpio drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_GPIO_DEVICE and
HAS_DTS_GPIO.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a board-specific dts overlay and fixup file to the arduino_101
environmental sensing sample, in preparation for making the sensor
drivers require dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Argonkey board building has been recently broken by a LSM6DSL sensor
driver fix (see commit: a013ce3bf0).
The board configuration file must now enable HAS_DTS_GPIO_DEVICE macro
instead of HAS_DTS_SPI_DEVICE.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
It is very inconvenient to maintain an application that both runs on a
Zephyr board and an out-of-tree board.
It forces one to write build scripts like this in the app:
if(BOARD STREQUAL my_out_of_tree_board)
set(BOARD_ROOT some/out/of/tree/board/path)
endif()
To avoid this we change the semantics of BOARD_ROOT. Instead of it
being a path to the board root it is now a prioritized list of board
root directories. Zephyr will append ZEPHYR_BASE to BOARD_ROOT.
This ensures that Zephyr boards can be used when the out-of-tree board
directory can not supply the requested board.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The documentation has been setting the environment variable
KERNELVERSION to the PROJECT_VERSION of the documentation. But
PROJECT_VERSION is not set during the documentation build so this has
no effect.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Change the format of KERNELVERSION as it exists in Kconfig to match
it's format elsewhere. Specifically, change from a string format
"1.10.3" to a numerical format.
This format change is a backwards-incompatible change. Any out-of-tree
Kconfig sources that were accessing KERNELVERSION with
$(KERNELVERSION) will need to be ported.
This change is to fix a bug. KERNELVERSION should have always been in
a numerical format. It should have been in a numerical format because;
KERNELVERSION is in a numerical format as a CMake variable and as a C
macro.
The purpose of having KERNELVERSION available in Kconfig is to have
configuration depend on the version, but this is only possible if it
exists in a numerical format[0].
[0] A string comparison of two semver strings does not always result
in a correct version comparison.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The last parameter is 'period', we should not pass duration twice.
Doing so makes zephyr hang with current mainline when it is chosen to be
the Grand Master.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds a possibility to select PTP clock accuracy through
KConfig.
The chosen accuracy should reflect the capabilities of the used
hardware.
See IEEE 1588-2008, chapter 7.6.2.5 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements GMCAP-1, GMCAP-2, and GMCAP-3 and their dependencies from
802.1AS-2011. See Annex A.10 for more details.
The Grand Master Capability can be turned on and off through KConfig.
Note: the correction field in FUP packets is not yet properly
calculated. There is a TODO left in the code, near which some parameters
are zeroed to make the correction field be set to 0. This mimics the
behavior of openAvnu (a Linux gPTP client). For full compliance the
field should be calculated and set properly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Optimize memory usage of enums that are used within structs.
Reorganize the affected structs to avoid holes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
SyncReceiptTime should use an ExtendedTimestamp (with fractional
nanoseconds precision). Add a struct with the definition of the needed
type and convert that variable.
The struct representing the ExtendedTimestamp is named
net_ptp_extended_time to keep consistency with the existing net_ptp_time
which is used for regular PTP timestamps.
See 802.1AS-2011 chapters 10.2.3.4 and 6.3.3.5 for more reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There are other ClockMasterSync state-machines (to be implemented).
Current name would either cause conflicts or be too ambiguous.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This splits L2CAP commands under 'bt' to 'l2cap' removing 'l2cap-'
prefix from the commands:
l2cap - Bluetooth L2CAP shell commands
Options:
-h, --help :Show command help.
Subcommands:
connect :<psm>
disconnect :[none]
metrics :<value on, off>
recv :[delay (in miliseconds)
register :<psm> [sec_level]
send :<number of packets>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This splits BR/EDR command under 'bt' to 'br' to reduce the command
list and at same time cleaning the mix between different bearers.
In addition to that also remove "br-" prefix for the commands:
br - Bluetooth BR/EDR shell commands
Options:
-h, --help :Show command help.
Subcommands:
auth-pincode :<pincode>
connect :<address>
discovery :<value: on, off> [length: 1-48] [mode: limited]
iscan :<value: on, off>
l2cap-register :<psm>
oob :
pscan :value: on, off
sdp-find :<HFPAG>
rfcomm-register :<channel>
rfcomm-connect :<channel>
rfcomm-send :<number of packets>
rfcomm-disconnect :[none]
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
KCONFIG_AUTOHEADER is an environment variable that was used by the C
Kconfig tools to determine where the autconf.h file is. After the
migration to python this environment variable became unused.
This patch removes the deprecated env var.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Update Kconfiglib (and menuconfig, just to sync) to upstream revision
8087311cd91be to get the following fix in, for an issue reported by
pfalcon:
Give clearer errors for bad endchoice/endif/endmenu nesting
An endchoice/endif/endmenu with no corresponding choice/if/menu
generated a cryptic 'unrecognized construct' parse error. Improve
the error message so that the problem is pointed out explicitly:
kconfiglib.KconfigError: Kconfig:37: couldn't parse 'endmenu': no
corresponding 'menu'
Reported in https://github.com/ulfalizer/Kconfiglib/issues/56.
This update also adds support for user-defined preprocessor functions in
Python, which could potentially be handy for DTS/Kconfig integration.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
1. Remove old shell documentation.
2. Create documentation for new shell module.
3. Fix shell.h comments to be able to generate
API documentation.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The board porting guide assumed that people were already familiar with
the Kconfig 'bool "foo"' shorthand for giving a symbol's type and prompt
at the same time. I got an email pointing out that it isn't obvious.
Explain the shorthand, and also mention that it's the preferred style in
Zephyr.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Calling pthread_join() with current thread would lead
to deadlock. Adding check for it and to return
appropriate error code.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Now that we've cleaned up all the STM32 related .dtsi files we don't
use dts/arm/st/mem.h so we can remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. We also seperate
out the F7 dtsi files into their own dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. We also seperate
out the F4 dtsi files into their own dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. We also seperate
out the F3 dtsi files into their own dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. We also seperate
out the F2 dtsi files into their own dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Selects HAS_DTS_GPIO in various gpio drivers that already support dts,
similar to how we select HAS_DTS_SPI in spi drivers and HAS_DTS_I2C in
i2c drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Increase the resolution of advertising random delay from
1 ms unit to 1 us units. The controller scheduling will
floor it to nearest 32KHz clock unit on nRF5 series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updates nrfx to the recently released version that corrects a few
imperfections in NFCT and USBD drivers.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.3.1
commit: d4ebe15f58de1442e3eed93b40d13930e7785903
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
