rv32m1_vega don't boot due to device init ordering and changes with the
device model. The soc code is looking for a device pointer for the
intmux. Change to using DEVICE_DT_GET here as that will ensure we get
a valid pointer and by the time we need to utilize the pointer the
intmux driver will have been initialized and thus the device pointer
will be ready.
Also set BUILD_OUTPUT_HEX since we utilize openocd to flash and west
flash is looking for a hex file for openocd targets.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a work in progress initial submission for the
Microchip MEC172x family SoC. This submission does
not contain all header files or power management.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The ARConnect Inter-core Debug Unit (ICD) provides
additional debug assist features in multi-core scenarios.
In master core(core 0) initial stage, we will program ICD to halt
all other cores based on a halt occurring in one ore more core.
And all cores are in halt mode on reset, so we need to make
sure other slave cores have launched and in running mode
before we enable ICD in master core.
Currently we launch master first, Let's reverse the launch
order, launch master last, to make sure slave cores have
launched before we program and enable ICD.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Rename the top-level header file from <canbus/canopen.h> to
<canopennode.h>.
Rename CANopenNode related Kconfig options from CONFIG_CANOPEN* to
CONFIG_CANOPENNODE*.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the Zephyr-specific interface and support code for CANopenNode into
the modules directory. Consolidate the CMakeLists.txt files into one.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Minor update to calls to get Tx chain delay in extended
advertising and scanning to use S8 encoding delays.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We need to take RX chain delay and PHY used to receive
CONNECT_IND into account when calculating 1st connection
event offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the Tx to Rx switch, fix the delay which should be the
Rx ready delay plus the Tx chain delay and plus 4 us active
clock jitter compensation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor cleanup of the implementation of mutual exclusion
of LE Connection Parameter Request amongst active
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a sample that demonstrates how to transfer a periodic
advertising sync from a device to another device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a sample of using (in this case subscribing) to periodic
advertising sync transfer (PAST).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Using helper functions decreases function complexity numbers reported
by static code analyzers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Check errors returned by edac_ecc_error_log_clear() and
edac_parity_error_log_clear().
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use only boolean in if conditions as new coding style implies for edac
API header file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove #ifdefs making code cleaner and including error injection API
functions to documentation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor EDAC API making it more clear, removing unneeded typedefs and
using check for optional and assert for mandatory APIs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Order the subsystems in the manifest file alphabetically, as they
actually should be according to the comment within the manifest file.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
