Previous implementation was unneccesarily complex, and cutting of
words such as "802.15.4" to "802.".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update the gen_board_catalog.py logic to also capture lineno for
each devicetree node. Use that info in the supported hardware list to
create clickable elements that directly take the user to the
corresponding line in the devicetree file on Github.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use raw HTML as there's no point in having lots of docutils
boilerplate for what's effectively static content
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Default in Twister is 32K, but 16K is a more "reasonable" goal and allows
to build hello_world against some of the most constrained boards in-tree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
During the review of Xen drivers enhancements, it was found that
@povergoing (previous maintainer) and @SgrrZhf (one of the collaborators)
are no longer active on GitHub. After discussions with other collaborators
(@lorc and @luca-fancellu) and in PR #82810, we decided to assign these
activities to me as one of the main developers for this part of Zephyr.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
For embedded supplicant case, when connects to WPA2 AP, driver will set
the key_mgmt to 'WLAN_KEY_MGMT_PSK | WLAN_KEY_MGMT_PSK_SHA256', as mfp
is default WIFI_MFP_OPTIONAL. Therefore, when using 'wifi status' to
get the security type, when the key_mgmt is 'WLAN_KEY_MGMT_PSK |
WLAN_KEY_MGMT_PSK_SHA256', the security type should be
'WIFI_SECURITY_TYPE_PSK'.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Replace the manually maintained features table by the tables generated from
device tree boards description.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add a console harness to check that the example has
started successfully.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The gpio header is missing, which will lead to failures
when declaring GPIO down the line in board overlays.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Add missing Copyright from derived files and fix the Copyright year for
some files to keep the original Copyright notice
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This commit fixes the following
bug.Issue link:
https://github.com/zephyrproject-rtos/
zephyr/issues/86399.
Some users reported data access
violations due to the qualifier.
Removing static ensures proper memory
alignment and avoids potential
memory access issues.
Signed-off-by: S Swetha <s.swetha@intel.com>
Replace manually authored "Supported Features" tables with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enhance the description around reschedule points to provide more
context about the current thread's identity. This update clarifies
that changing the identity of the current thread involves switching
the CPU's execution from one thread to another.
Signed-off-by: Arrel Neumiller <rlneumiller@gmail.com>
doc: Improve context for thread identity in scheduling
Enhance the description around reschedule points to provide more
context about the current thread's identity. This update clarifies
that changing the identity of the current thread involves switching
the CPU's execution from one thread to another.
Signed-off-by: Arrel Neumiller <rlneumiller@gmail.com>
Adds improvement to the GATT API documentation by providing examples of
where (and how) certain structs are used, and adds specification
references to the fields of bt_gatt_cpf to clarify their purpose.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Pattern drivers/bluetooth/hci/hci_silabs_* can be replaced by
drivers/**/*silabs*. Thus, it is no more required to have a specific
case for bluetooth drivers.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Usually, drivers for siwx91x are named "silabs_siwx91x". However, there
are a few exceptions:
- **/Kconfig.siwx91x
- drivers/wifi/siwx91x
Let's ensure the reviewers for these files are properly assigned.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Remove two out of date/incorrect notes in the documentation for this
board:
For quite a while now, we have models of some parts of the CRACEN HW.
Since f4cdb0f07e we are using the CRACEN
RNG driver.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This board is using since f4cdb0f07e
the cracen RNG driver, so there is no need to set default options for
the native_posix entropy driver.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
