Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Move header includes to source file. Currently firmware source files
have a hardcode partition identificator. This moves identificators
to updatehub core.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
For all commands and replies, the buffer length needed to build or the
length of data needed to decode needs to be checked and asserted. Right now
we do this by ad-hoc if-s. Add macros that do this at a common location.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The raw, flags check has become a bit excessive and has begun to affect
code readability. Provide inline functions for those accesses that are
frequent. Also, get rid of `struct osdp_cp` as it can be fully represented
by `struct osdp` itself.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
CP has an array of PDs and pd->offset was the position of the PD in CP's
list. Since offset has many meanings, rename it to pd->idx.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Partial packets in the RX buffers cause the subsequent packet to be
treated as malformed. The RX buffer can have partial data if the sender
is too slow in sending the packet of if there is an interruption in
transmission mid-way.
To avoid any issues due to such partials, flush the uart channel before
sending the command/response.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The log lines in CP and PD had a prefix such as "CP: " and "PD: " that
does not add too much value as a given device an either be CP or PD
only. This patch removes those and enhances some other log lines while
at it.
It also adds a enum for return values throughout the module to improve
code quality.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Use a flag to report a protocol error to the states. This keeps
state specific actions in the state. Currently, those state
specific actions are handled in the pe_report_error function.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
The name and wording used in template can be misleading.
Use more accurate word instance instead of device since
an implementation does not necessarily have to implement
a device (in the sense of Zephyr device model), and if it
does then devicetree should be used to describe number of
instances as in the case of CDC ACM implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The function checked several value, but the BAP spec does
not specify that these cannot be different from stream to
stream in the CIG. The function thus did nothing but needlessly
restrict the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit fixes issue introduced in
5d059117fd.
Use extra flag stored in user data of net_buf to control segmented
messages in Friend Queue. The initial idea with using fragments didn't
work.
This fixes the following PTS tests:
- MESH/NODE/FRND/FN/BV-08-C
- MESH/NODE/FRND/FN/BV-19-C
- MESH/NODE/CFG/HBS/BV-05-C
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fix UDP TX packet count when DHCPv4 is used. Currently UDP TX counter
is only updated when net context is in use. DHCPv4 however does not use
net_context underneath, therefore it needs to update UDP TX stats on its
own.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds the support for host commands being transported
by the Serial Host Interface on the NPCX SoC.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
A variable was defined directly after a label in two case statements,
resulting in build warning with certain compilers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes two issues with the JIT scheduler:
Rescheduling of primary advertising packets for extended advertising
when using the JIT scheduler did not work, since the done events for
the primary events never made it into the reschedule logic
The EVENT_DONE_EXTRA_TYPE_ADV_AUX event (for auxillary packets) could
cause a "reschedule" for a primary event that was actually sent
successfully (causing it to be sent twice)
Signed-off-by: Troels Nilsson <trnn@demant.com>
This prevents a configuration error by selecting the console if
the UART MCUmgr transport is used, which is actually a dependency
for this transport.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update sdmmc framework to use sdmmc_wait_ready when accessing card in
SPI mode. this will allow cards that do not return to ready to be polled
for busy status until the SD data timeout expires
Fixes#52931
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Recently introduced MISRA-C CI check complains about use of a duplicte
tag, so, shorten the variable from shell->sh to avoid same name as the
structure.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Add a new callback list structure for state change information.
These APIs are meant to eventually replace the single callback API
provided by openthread_set_state_changed_cb().
This will allow multiple users to gain information about
OpenThread stage changes.
Note CONFIG_OPENTHREAD_MAX_STATECHANGE_HANDLERS
with OpenThread's otSetStateChangedCallback() API can also be
used to enable registration of multiple callbacks of this type but this
cannot be modified if a certified OpenThread binary is used in the
build.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
USB_TRANS_NO_ZLP flag has no meaning for usb_transfer() in
host-to-device direction (USB_TRANS_READ).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
audio_iso.c should only be compiled if we require any streams,
so it is now guarded by CONFIG_BT_AUDIO_STREAM.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After several fixes of the re-ordering logic in TCP, the receive queue
works as intended and cleans itself up properly. Previously the default
timeout was 100 ms, which pretty much disables it for real applications.
Increase the timeout to 2 seconds to actually enable it for in practice.
This should help pass much more of the Maxwell Pro tests.
This is the first step before removing the timeout completely.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
In case that CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SNK_COUNT or
CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SRC_COUNT is set to NULL, the
unicast client implementation in the shell would have compile
warnings, since the arrays would be 0 and we would attempt to
access it some places (or rather the compiler/linker would
think that, but it would never happen at runtime).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Array 'days_in_month' of size 12 may use index value bigger then
count of its elements.
Signed-off-by: PawelX Dobrowolski <pawelx.dobrowolski@intel.com>
Fixes an issue whereby event ID was not checked properly, meaning
that OR'd events would not work as one would expect.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Setting a detected packet family (ipv4 or ipv6) in net_context level
instead in lower layers for AF_PACKET/SOCK_RAW/IPPROTO_RAW type sockets
when sending data.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Clear the `ATT_CONNECTED` flag when a channel is detached (could be after
an ATT timeout).
Also convert the assert checking it in `chan send` to an `if` test, since
the channel could be disconnected from a different thread than the one
triggering `chan_send`.
Fixes#53247.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Change the BT_AUDIO_ISO logging module to use
log_config_inherit to be consistent with the other LE Audio
logging modules.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The TinyCrypt is the current library used by UpdateHub to perform
SHA-256 integrity check. This refactor code and add support to
mbedTLS library. It changes default library to mbedTLS to use
hardware accelerator when available.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently choice for FLASH_AREA_CHECK_INTEGRITY does not have a
denomination. Without that it is not possible select a default
backend hash backend for integrity check at project configuration.
This add a name to allow select flash area check integrity backend.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
ISO Synchronized Receiver only builds do not transmit and
hence may not have any tx buffers allocated in a
Controller, leaving bt_dev.le.acl_pkts semaphore
uninitialized or bt_conn_get_pkts() returning NULL.
Do not use the semaphore if no Tx buffers allocated in a
Controller.
Regression in commit ef19c64f1b ("Bluetooth: host: poll on
CTLR buffers instead of host TX queue").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add common function to handle large GATT reads of strings.
Initialize the buffer pointers in the net_buf which is used for large
GATT reads by bt_tbs_client_read_call_state() and
bt_tbs_client_read_current_calls().
Define the size of the allocated buffer based on the enabled features.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
The way that the braodcast clause for handling failing
ISO data path would end up in the __ASSERT. It has been
slightly modified to make it use if-else properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The direction of a stream/endpoint/parameter has just been
logged as a unsigned integer. This commits adds a
value -> string internal function that would log
BT_AUDIO_DIR_SINK as "sink" and BT_AUDIO_DIR_SOURCE
as "source".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
