Disconnect CIS immediately if event done extra status indicates MIC
failure. Return reason BT_HCI_ERR_TERM_DUE_TO_MIC_FAIL.
Fixes EBQ test /LL/CIS/PER/BV-27-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When the 'instant' of a CIS is postponed by increasing the conn_event of
the CIS_RSP compared to CIS_REQ, the CIS offset shall be calculated as
an equivalent window offset by an integer number of ISO intervals.
This is obtained by increasing the CIS_Offset_Min and CIS_Offset_Max by
the modulus of the connection interval delay time.
Signed-off-by: Morten Priess <mtpr@oticon.com>
To be able to timely start the first CIS/CIG, if the requested instant
is the next connection event, call ull_peripheral_iso_start directly
from rp_cc_state_wait_rx_cis_ind instead of waiting for next time
through the state machine.
To enable ULL/LLL to prevent adding latency when LLCP is waiting for
instant, local- and remote procedures with instant now expose a function
for checking this state.
Fixed event_counter function to prevent one-off in RX path. Unified to
use single function ull_conn_event_counter.
Fixed LLCP unit tests and added new mock function.
Signed-off-by: Morten Priess <mtpr@oticon.com>
USB stack did leak memory on every SET ADDRESS request. UDC control
allocator could cope with up to 13 leaked allocations. Therefore,
issuing bus reset 13 times in a row (in addition to automatic reset
after connecting the USB cable) was enough to exhaust memory and
thus drive USB stack inoperable.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The sink ASE does not have a disabling state, but since the
stream callbacks does not necessarily match the ASE states,
we need to do our own check to see if a sink ASE has been
disabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Before this commit we simply always notified/indicated
all presets and active index to any bonded device, even
if they never subscribed to anything, or even if we never
registered HAS.
This commit modifies that, so that only the proper
connected clients will get the notifications/indications,
and that we only send them if something has changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The security_changed callback may be called before
bt_has_register has been called, thus making the active_preset_work
handler uninitailized, causing an ASSERT when the work is submitted
in the security changed callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Calling bt_has_register multiple times would cause attempts
to register a HAS multiple times. Fixed by adding a check
and return with EALREADY if it is already registered.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The POSIX spec requires that `SO_LINGER`, `SO_RCVLOWAT`,
and `SO_SNDLOWAT`, and `SOMAXCONN` are defined in
`<sys/socket.h>`. However, most of the existing socket
options and related constants are defined in
`<zephyr/net/socket.h>`.
For now, we'll co-locate them. It would be
good to properly namespace things.
Additionally, a no-op for setsockopt for `SO_LINGER` to
make things Just Work (TM) for now.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add check preventing Out of band access. There are tests trying to
access out of band handle like:
test_sink_invalid_ref and test_source_invalid_ref trying to access
handle 99.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The updatehub shell cmd_info allocate memory but not checks function
return. This add missing checks and proper error handle.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The current updatehub version forces user application to run in kernel
mode. This add necessary api syscalls to isolate userspace from kernel.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support for configuring power save timeout in Wi-Fi chipsets.
Changes to configure power save inactivity timer.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
z_cpus_active count becomes incorrect when the state is
PM_STATE_RUNTIME_IDLE and CONFIG_PM_DEVICE is enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This service allows to synchronize the clock with the application
server.
Synchronization requests are initiated by the device in a regular
interval, configurable via Kconfig.
The implementation only supports TS003-2.0.0, as the previous revision
TS003-1.0.0 requested to temporarily disable ADR and and set nb_trans
to 1. This causes issues on the server side and is not recommended
anymore.
Signed-off-by: Martin Jäger <martin@libre.solar>
This is a prepartion for adding actual services needed for firmware
upgrade over the air (FUOTA).
The services run in a dedicated work queue.
This commit introduces code that initializes the work queue and
provides functions to schedule uplink messages after a given timeout.
Signed-off-by: Martin Jäger <martin@libre.solar>
This commit changes VOCS set location behavior.
When an RFU location is written, VOCS ignores it.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Use the maximum data PDU size time reservation space
considering the Data length could be updated from default
27 bytes to maximum support size.
If maximum time reservation is disabled then time space
reservation corresponding to the default data length at the
time of the start/enable of Central role is used.
Note, currently this value is only used to space multiple central
connections and not for actual ticker time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection parameter request procedure to be cacheable
if a remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy control procedure implementation to avoid
connection update procedure with reason instant passed
(0x28).
Connection Update Indication PDU is enqueued after data
enqueue to LLL context is paused and the enqueue resumes
when already enqueued data PDUs are all acknowledged.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the init command for teh CSIP Set Coordinator.
The main reason for this is that we want to ensure that we
register the conn callbacks early so that `conns` array is
properly filled.
The other callbacks registered in the init function
can easily be moved to where they are needed, and even
unregistered to avoid parsing more data than we need.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
During the NVS initialization, if gc had to be done, the NVS cache
rebuild wasn't called.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
While porting the coverage.c file from RIOT to Zephyr, which employs
different compiler flags, I noticed several -Wcast-align GCC warnings on
arm. I think, as is, the current implementation may perform unaligned
memory accesses which may not be supported on certain platforms. To
workaround that, I have rewritten the code for RIOT using
bytewise-writes with `memcpy`.
Signed-off-by: Sören Tempel <tempel@uni-bremen.de>
Full resource names aren't as long as combined basename- and name-buffer
sizes but the compiler doesn't know it. Increasing the buffer size to
avoid the compiler warning.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Since the event length update is not necessarily an improvement
in all situations a Kconfig option is added so that it can
be disabled for the users that do not need it.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
When init_igmp is called the ipv4 pointer was not initialised.
Therefore, a different API needs to be used to ensure that IPv4
is enabled when calling init_igmp.
Fixes#53913
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Deprecate the old API and replace with new one which uses
the lwm2m_obj_path struct instead of a string.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate send API using the string references as paths.
Replace it with one using path structs.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate old API and make new API using path structs
instead of using old string reference based paths.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate old API and offer a new API for object and resource
creation and deletion. The new API uses path struct instead
of using a string as a reference to a path.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Proper handling re. non-supported CIS TERMINATE
This fixes EBQ test LL/PAC/CEN/BV-01-C on the general level.
'Replaces' #ee2a43b5dc
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add option to disable CRC for fcb entries. This improves the write
throughput significantly at the cost of not detecting corrupted data
in flash. This is beneficial for aplications that needs the extra
write throughput, where error detection is done elsewhere.
Allow the FCB entries in flash to have a valid CRC when CRC is
disabled in the FCB. This allows existing solutions to disable
CRC checking, while keeping the CRC areas intact. Note that this
is a one-way option.
Fixes#53707
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
