Fixed to ensure that semaphore is not used by the log core
when multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This adds a new UART backend for dictionary based logging,
where this can output binary data in both binary and
hexidecimal strings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds dictionary based logging support. Dictionary based
logging is binary based where one big difference is that
static strings are stored as pointers instead of the whole
string. This results in reduced space requirements for
storing log messages in certain scenairos.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
NIOS2, RISC-V and SPARC are using _image_rodata_start/_end in
their linker scripts to mark the boundaries of rodata. So
they no loner need special treatment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It has been seen that when net backend is enabled stack usage
is around 1080. Setting 1152 as the default.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The log_backend_swo_init function sets the CYCCNTENA bit of the DWT
register to 0, disabling the counter (which is necessary for the timing
functions.
Avoid overwriting the CYCCNTENA bit.
Do not try to set read-only bits.
Fixes#34341
Signed-off-by: Andrés Manelli <am@toroid.io>
So far we only have log_msg_timestamp_get() function, which returns
internal timestamp representation. This is either clock cycles or uptime
in ms, depending on main clock precision.
Introduce log_output_timestamp_to_us() helper function, which allows to
convert internal logging timestamp to us.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Just renaming the function parameter fix two violations, one is
caused because the parameter name is different from the declaration
the other violation is because the identifier was starting with
underscore.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added implementation of log_msg2 which is creating log messages
using cbprintf packaging and storing them in circular ring buffer
(mpsg_pbuf).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The k_mem_slab_init() calls create_free_list() which checks
the slab block alignment. Noticed with Intel ehl_crb board,
which is 64-bit architecture, that the k_mem_slab_init() fails
because the log_strdup_buf items were not aligned properly.
This commit adds the alignment requirement to log_strdup_buf so
that the elements are alignment properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
In modes where string duplication is not used, the code is
still compiled. On some compilers it was failing due to calling
strncpy which will do nothing because n is 0. Increase
CONFIG_LOG_STRDUP_MAX_STRING to 2 to ensure that n is 1 in that
case
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added recovery for case when log file was lost somehow.
Back-end will try to create new file if possible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
New backend is based on littleFS. After init, there is created new file
with continuous numeration. When max size of file is reached, system
creates another one. File size is limited by Kconfig option.
There is possibility to overwrite old files or drop new ones.
FS backend logging to file if the FS location is available.
Otherwise log messages are drooped.
User can also change the name of log files.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <Andrzej.Puzdrowski@nordicsemi.no>
Some devices may use different reference than cpu clock. Add
support for using swo-ref-frequency property when present.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Change fixes an issue related to data access out of array bounds and
suppresses compiler warning.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Previously, a racing write to the provided metadata could result
in up to CONFIG_LOG_STRDUP_MAX_STRING-2 bytes after the
end of user-accessible memory being leaked into the strdup pool
or the resulting log.
For now, explicitly copy the metadata string. In an ideal world
this could directly copy from userspace into the strdup buffer, but
this obviously only works if strdup is enabled.
Signed-off-by: James Harris <james.harris@intel.com>
Any value passed to a function in <ctype.h> shall be
representable as an unsigned char or be the value EOF.
So changed type of variable to unsigned char.
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Improve default logging strdup buffer count and size.
The maximum string logged with Bluetooth is a 32-byte key in hex.
The strdup buffer is empty too often.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removed printk.h include from log_core.h.
Since LOG_PRINTK cannot be enabled with LOG_MINIMAL removed
support for both.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The definition of lock, k_spinlock type, that has been used to guard
variables holding statistical data for log_strdup has been missing
static modifier, which caused the lock structure to be reallocated
on stack each time an execution entered the block.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
In std_print(), the log arguments were casted to uint32_t before
being sent further to the output function.
For integer types which can not be represented by uint32_t, the
degraded user experience may be acceptable.
However, for string arguments, the output function will eventually
dereference the pointer, so if the "char *" can not be represented
by uint32_t, bad things are going to happen. In practice you will see
this on 64-bit systems where sizeof (char *) is 8 byte and addresses
higher than 0x80000000.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
is_rodata() can now determine if an object is the rodata section
on SPARC. This eliminates spurious run-time error messages about
"missinglog_strdup()".
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The immediate logging option cannot be used with network logging
support CONFIG_LOG_BACKEND_NET as that would cause the generated
rsyslog messages to be malformed. The UDP packets would only have
one byte payloads which is not correct. So make sure that user is
not able to select a configuration with immediate mode and network
logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This platform had separate backends for the log subsystem and printk
handler, which was silly. Unify them to use the same backend so they
don't clobber each other.
This patch appears to be a lot of lines, but it's really mostly code
motion and renaming.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add STP transport support for MIPI SyS-T with Kconfig MIPI_SYST_STP,
this is following SyS-T spec Section 7.
And with Kconfig MIPI_SYST_RAW_DATA, add raw data output support for
MIPI SyS-T protocol stack.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
