according to the comment "all if no modules specified"
to support "all" state, set to 1 number of parameters.
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Move the platform.h from the module to the zephyr tree. This file is
zephyr sepcific and belongs in the zephyr tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exported header oftenly used when creating a logging
backend that inpects the log 'stream'.
Enables use in external Zephyr modules implementing the
logging backend interface.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
Significant rework of the Intel Audio DSP SoC/board layers. Includes
code from the following upstream commits:
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 25 16:34:36 2020 +0100
xtesna: adsp: use 50k ticks per sec for audio
Audio needs high resolution scheduling so schedule to nearest 20uS.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 24 13:59:01 2020 -0700
soc/xtensa/intel_adsp: Remove sof-config.h includes
This header isn't used any more, and in any case shouldn't be included
by SoC-layer Zephyr headers that need to be able to build without SOF.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat Jun 20 15:42:58 2020 -0700
soc/intel_adsp: Leave interrupts disabled at MP startup
This had some code that was pasted in from esp32 that was inexplicably
enabling interrupts when starting an auxiliary CPU. The original
intent was that the resulting key would be passed down to the OS, but
that's a legacy SMP mechanism and unused. What it actually did was
SET the resulting value in PS.INTLEVEL, enabling interrupts globally
before the CPU is ready to handle them.
Just remove. The system doesn't need to enable interrupts until the
entrance to the first user thread on this CPU, which will do it
automatically as part of the context switch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 13:57:54 2020 +0300
dts: intel_cavs: Add required label
Add required label fixing build for CAVS15, 20, 25.
Fixes following errors:
...
devicetree error: 'label' is marked as required in 'properties:' in
bindings/interrupt-controller/intel,cavs-intc.yaml,
but does not appear in
...
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:19:56 2020 +0300
soc: cavs_v18: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:12:25 2020 +0300
soc: cavs_v20: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 14:59:23 2020 +0300
soc: cavs_v25: Remove dts_fixup fix build
Remove unused now dts_fixup and fix build with the latest code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:29:06 2020 +0300
soc: intel_adsp: Remove unused functions
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:53:58 2020 +0300
soc: intel_adsp: Clean up soc.h
Remove unused or duplicated definitions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:02:23 2020 +0300
soc: intel_adsp: De-duplicate soc.h
Move soc.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:54:19 2020 +0300
soc: intel_adsp: Remove duplicated io.h
Move duplicated io.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:46 2020 +0300
cmake: Correct SOC_SERIES name for byt and bdw
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:02 2020 +0300
soc: intel_adsp: Build bootloader only for specific SOCs
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 11 13:46:25 2020 +0100
boards: xtensa: adsp: add byt and bdw boards WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 10 10:01:29 2020 -0700
soc/intel_adsp: Make the HDA timer the default always
The CAVS_TIMER was originally written because the CCOUNT values are
skewed between SMP CPUs, so it's the default when SMP=y. But really
it should be the default always, the 19.2 MHz timer is plenty fast
enough to be the Zephyr cycle timer, and it's rate is synchronized
across the whole system (including the host CPU), making it a better
choice for timing-sensitive applications.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:21:43 2020 +0300
soc: cavs_v25: Enable general samples build
Enables general samples build for SOC cavs_v25.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:13:53 2020 +0300
soc: cavs_v20: Enable general samples build
Enable general sample build.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:35:13 2020 +0300
soc: cavs_v18: Fix build general samples
Fix building general samples for CAVS18.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:22:40 2020 +0300
soc: intel_adsp: Add support for other SOCs
Support other SOCs in the "ready" message to the Host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 13:25:39 2020 +0300
soc: intel_adsp: Move adsp.c to common SOC area
Move adsp.c to common and clean makefiles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 17:18:18 2020 +0300
boards: intel_adsp: Remove dependency on SOF
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 14:29:44 2020 +0100
soc: xtensa: cavs: build now good for cavs20 + 25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 15:57:01 2020 +0300
soc: cavs_v15: Fix build for hello_world
Fix build for other then audio/sof targets.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:50:12 2020 +0300
sample: audio/sof: Remove old overlays
Removing old overlays used to switch logging backend.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 15:02:01 2020 +0300
soc: intel_adsp: Correct TEXT area
Correct HEADER_SPACE and put TEXT to:
(HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE + VECTOR_TBL_SIZE)
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:44:47 2020 +0300
soc: intel_adsp: Trivial syntax cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:41:07 2020 +0300
soc: intel_adsp: Fix bootloader script path
Make it possible to find linker script if build is done not inside
ZEPHYR_BASE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 12:10:17 2020 +0100
soc: xtensa: cavs20/25: fix build with new headers - WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 13:35:38 2020 +0300
soc: intel_adsp: Fix include headers
Fixes include headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 10:38:50 2020 +0100
soc: xtensa: cav18: updated headers- WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Fri May 1 15:29:26 2020 -0700
soc/xtensa/intel_adsp: Clean up MP config logic
CONFIG_MP_NUM_CPUS is a platform value, indicating the number of CPUs
for which the Zephyr image is built. This is the value kernel and
device code should use to predicate questions like "is there more than
one CPU?"
CONFIG_SMP is an application tunable, controlling whether or not the
kernel schedules threads on CPUs other than the first one. This is
orthogonal to MP_NUM_CPUS: it's possible to build a "SMP" kernel on a
uniprocessor system or have a UP kernel on a MP system if the other
cores are used for non-thread application code.
CONFIG_SCHED_IPI_SUPPORTED is a platform flag telling an SMP kernel
whether or not it can synchronously signal other CPUs of scheduler
state changes. It should be inspected only inside the scheduler (or
other code that uses the API). This should be selected in kconfig by
soc layer code, or by a driver that implements the feature.
CONFIG_IPM_CAVS_IDC is a driver required to implement IPI on this
platform. This is what we should use as a predicate if we have
dependence on the IPM driver for a platform feature.
These were all being sort of borged together in code. Split them up
correctly, allowing the platform MP layer to be unit tested in the
absence of SMP (c.f. tests/kernel/mp), and SMP kernels with only one
CPU (which is pathlogical in practice, but also a very good unit test)
to be built.
Also removes some dead linker code for SMP-related sections that don't
exist in Zephyr.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:41:55 2020 +0100
soc: xtensa: bootloader - use linker script
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:26:18 2020 +0100
soc: xtensa: further fix headers - WIP
Simplify the directory structure, WIP for cavs20 and cavs25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 12:59:30 2020 +0300
soc: cavs_v15: Remove unneeded include
Remove include fixing build.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Jun 7 12:37:35 2020 +0100
soc:xtensa: adsp: remove sof specific code from soc headers
TODO: v1.8+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 23:19:37 2020 -0700
intel_adsp_*/doc: fix duplicate .rst labels
Quick fix purely to make the build green again.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 22:34:40 2020 -0700
samples/audio/sof: use OVERLAY_CONFIG to import apollolake_defconfig
This reverts commit 21f16b5b1d29fca83d1b62b1b75683b5a1bc2935 that
copied it here instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 5 12:34:48 2020 +0300
soc: intel_adsp: Move soc_mp to common
Moving soc_mp to common SOC area, it still needs fixes for taking
number of cores from Zephyr Kconfig, etc.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 16:05:06 2020 +0300
soc: intel_adsp: Move memory.h from lib/
For those files from SOF referencing platform/lib/memory.h we have
include.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 15:20:09 2020 +0300
soc: intel_adsp: Rename platform.h to soc.h
Rename to prevent including it from SOF.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:47:55 2020 +0300
soc: intel_adsp: Move headers
Move headers to more convenient place
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:21:51 2020 +0300
soc: intel_adsp: More SOC cleaning
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Mon Jun 1 15:31:34 2020 -0700
samples/audio/sof: import sof/src/arch/xtensa/ apollolake_defconfig
Import modules/audio/sof/src/arch/xtensa/configs/apollolake_defconfig
into prj.conf and new boards/up_squared_adsp.conf
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:07:40 2020 +0100
soc:xtensa: adsp: let SOF configure the DSP for audio
Let SOF do this for the moment.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:06:20 2020 +0100
soc: xtensa: cavs: remove headers similar to cavs15
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 15:58:38 2020 +0300
soc: intel_adsp: Move ipc header to common
Remove duplicated headers from CAVS to common SOC part
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 13:02:09 2020 +0300
soc: cavs_v15: Remove unneeded headers
Remove also from CAVS15.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 18:34:11 2020 +0300
Remove more headers
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:12:09 2020 +0100
soc: xtensa: remove cavs sod headers for drivers and trace.
Duplicate cavs15 headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:05:12 2020 +0100
samples: move sof dai, dma and clk configs to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 17:38:45 2020 +0300
soc: intel_adsp: Remove more duplicated headers
Remove more headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 2 15:50:03 2020 +0100
samples: sof: remove pm realted files.
Use the SOF versions.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 16:55:40 2020 +0300
WIP: Strip lib from include path
WIP, pushed for sync
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:44:33 2020 +0300
soc: intel_adsp: Remove more headers
Remove even more common headers
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:00:47 2020 +0300
soc: intel_adsp: Remove SOF headers
The headers would be used by audio/sof app directly from SOF module.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat May 30 11:01:26 2020 -0700
soc/intel_adsp: Alternative log reading script
This script speaks the same protocol and works with the same firmware,
but:
* Is a single file with no dependencies outside the python3 standard
library and can be run out-of-tree (i.e. with setups where the
firmware is not built on the device under test)
* Operates in "tail" mode, where it will continue polling for more
output, making it easier to watch a running process and acting more
like a conventional console device.
* Has no dependence on the diag_driver kernel module (it reads the DSP
SRAM memory directly from the BAR mapping in the PCI device)
* Is MUCH smaller than the existing tool.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 28 16:17:51 2020 +0300
Decrease HEP pool size to 192000
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:27:00 2020 +0100
soc: xtensa: cavs25: complete support for cavs25
Builds, not tested on qmeu due to missing SOF ROM (TODO)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:24:26 2020 +0100
soc: xtensa: cavs20: complete cavs20 support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:22:13 2020 +0100
soc: xtensa: cavs18: complete boot support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:19:23 2020 +0100
soc: xtensa: cavs15: use cavs15 instead of apl as linker soc name
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:16:06 2020 +0100
TODO: samples: sof: work around missing trace symbols.
Disable local trace.
Needs trace updates finished before this can be removed.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:57:19 2020 +0100
dts: xtensa: rename apl to cavs15 DTS
This DTS is used by more than APL SOC. i.e. all CAVS15 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:52:20 2020 +0100
west: commands: sign: Add signing support for other CAVS targets
Sign for CAVS15, CAVS18, CAVS20 and CAVS25 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:50:07 2020 +0100
boards: xtensa: cavs: used Zephyr mask macro
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:49:46 2020 +0100
soc: xtensa: move code to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 26 11:40:36 2020 +0100
soc: xtensa: use SOF versions of clk
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:38:45 2020 +0300
soc: intel_adsp: Send FW ready for non SOF configuration
Configure windows and send FW ready when used without SOF, should be
loaded with fw_loader script.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:02:22 2020 +0300
soc: intel_adsp: Use SOF version of the file
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:47:27 2020 +0300
soc: intel_adsp: Clean up include headers
Remove SOF mentions from the SOC headers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:43:05 2020 +0300
soc: intel_adsp: Move SOF specific code to samples/audio/sof
Move SOF specific code to the SOF sample.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:39:42 2020 +0300
soc: intel_adsp: Use SOF module's version of mem_window.c
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:36:41 2020 +0300
soc: intel_adsp: Use exact copy from SOF module
Use SOF module verion of the clk.c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 14:03:35 2020 +0300
soc: xtensa: Add {SOC_FAMILY}/common/include path
Add ${SOC_DIR}/${ARCH}/${SOC_FAMILY}/common/include path if exist.
Fixes issues for xtensa SOCs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:18:50 2020 +0100
soc: xtensa: cavs common: fix headers for build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:10:57 2020 +0100
soc: xtensa: adsp: add so_inthandlers.h for Intel platforms
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:08:26 2020 +0100
cmake: xtensa: select correct compiler per CAVS target.
TODO: what about XCC ?
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue May 19 14:59:26 2020 +0300
boards: up_squared_adsp: Move SOF configuration to samples
Move SOF-specific configuration to samples/audio/sof prj.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 15 15:29:50 2020 +0300
soc: intel_adsp: Move SOF code to modules/audio/sof
Move SOF dependent code out of SOC area.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 14 17:30:38 2020 +0300
Move task_main_start() to audio/sof sample
Start task_main_start() from main of audio/sof sample.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed May 13 15:37:20 2020 +0300
Rename up_xtreme_adsp to intel_adsp_cavs18
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Apr 27 14:12:59 2020 +0300
Add sample audio/sof for SOF initialization
Add dedicated sample where we put SOF specific initialization.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 18:49:36 2020 +0300
WIP: soc: cavs_v18: Cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:44:06 2020 +0300
soc: cavs_v15: Move soc init to common part
Moving SOC init to the right place.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:02:28 2020 +0300
soc: intel_adsp: Move common part to special dir
Moving common part to common/adsp.c
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 8 14:37:50 2020 +0300
boards: up_xtreme_adsp: Add initial up_xtreme_adsp board
Add initial board copying existing up_squared_adsp board and using
CAVS1.8 SOC family.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 7 15:30:51 2020 +0300
soc: intel_adsp: Generalize bootloader
Move bootloader to soc/xtensa/intel_adsp making it available for other
boards.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:31:00 2020 +0100
boards: xtensa: up_squared: Add support for all CAVS
Add boot support for all CAVS versions. TODO: needs to be made common
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:25:34 2020 +0100
soc: xtensa: intel_adsp: Manage cache for DMA descriptors
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 21:10:50 2020 +0100
soc: xtensa: adsp: use 24M567 clock
Use audio clock
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 10:04:01 2020 +0100
xtensa: soc: adsp: enable system agent
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:03:07 2020 +0100
soc: xtensa: intel_adsp: increase mem pool to 192k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:02:31 2020 +0100
soc: xtensa: intel_adsp: re-enable DMA trace
Buffer will be empty (as trace items sent to Zephyr LOG) but
logic is running.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 11:18:55 2020 +0100
soc: xtensa: intel: dont use uncache region yet.
Some code was still using this region. Use later.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 10:07:28 2020 +0100
soc: xtensa: intel_adsp: fix notifier init
Topology now loads.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:18:38 2020 +0100
boards: up2: Need to use sof config for bootloader
This will need uncoupled at some point. For testing today.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:16:38 2020 +0100
boards: up2: increase heap to 128k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:35:19 2020 +0300
boards: up_squared_adsp: Use bigger HEAP
Use HEAP from old demo.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 16:06:32 2020 +0100
soc: xtensa: intel_adsp: Fix config.h naming collisions
Rename sof version to sof-config.h
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:22:42 2020 +0300
Small cleanups
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 22:00:44 2020 +0300
tests: sof/audio: Test ll scheduler
Add more tests for scheduler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 18:38:35 2020 +0300
tests: Add first schedule test
Add initial test for testing scheduling.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 29 13:36:23 2020 +0100
soc: xtensa: rmeove build warnings
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 18:04:33 2020 +0300
soc/intel_adsp: Register sof logging
Register sof logging for tracing
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 14:16:55 2020 +0300
boards: up_squared_adsp: Define HEAP_MEM_POOL_SIZE
Define HEAP_MEM_POOL_SIZE when SOF enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 10:09:20 2020 +0300
tests: audio/sof: Add interrupt API for testing
Add initial interrupt API for testing.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 15:54:28 2020 +0100
soc: xtensa: adsp: Update linker script for SOF sections.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 11:20:01 2020 +0100
soc: xtensa: adsp: send SOF FW metadata as boot message
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 26 21:47:20 2020 +0100
soc: xtensa: adsp: re-enable all SOF IP init.
Do all SOF IP init.
TODO: ATOMCTL, WFI on LX6
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sat Apr 25 15:30:40 2020 +0100
soc: xtensa: irq: Make sure IPC IRQ is registered.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 20:56:09 2020 +0300
tests: sof: Enable console
Enable console for the test.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 17:57:22 2020 +0300
soc: cavs_v15: Fix XTENSA_KERNEL_CPU_PTR_SR
Use correct value for XTENSA_KERNEL_CPU_PTR_SR.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 14:48:31 2020 +0300
tests: audio/sof: Add tests for alloc API testing
Add initial tests for allocation API testing. Can be extended for
other later.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 17:49:32 2020 +0300
logging: Enable xtensa simulator backend for ADSP
Enable xtensa simulator backend for SOC_FAMILY_INTEL_ADSP.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 20:58:30 2020 +0100
soc: xtensa: add common cpu logic
Support for additional cores.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 10:11:07 2020 +0300
Update west.yaml to point to the latest repo
Update west.yaml
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:17:01 2020 +0100
soc: xtensa: cavs: Fix build for clk.c on cavs18+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:31 2020 +0100
soc: xtensa: cavs15: removed unused headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:09 2020 +0100
soc: xtensa: cavs25: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:52 2020 +0100
soc: xtensa: cavs20: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:09 2020 +0100
soc: xtensa: cavs18: Align with SOF headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 11:42:39 2020 +0100
west: sof: Updated to latest version.
Now builds, links and runs SOF code (but not to FW ready).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 19 13:28:53 2020 +0100
xtensa: intel adsp: build in SOF symbols if CONFIG_SOF
Code now fully links against SOF. Needs to be run tested.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:19:28 2020 -0700
DO NOT MERGE: temporarily add thesoftproject as remote for sof module
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:33:40 2020 -0700
ipm: cavs_idc: use the IPC/IDC definitions in SoC
The SoC definitions have the necessary IPC/IDC bits so there is
no need to define them separately.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 14:30:20 2020 +0100
TODO: config: Use static config for SOF module.
TODO: needs to be generated as part of SOF kconfig
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri Apr 10 21:56:07 2020 +0100
HACK: Add SOF into build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:55:15 2020 +0100
west: modules: Add SOF audio module.
Add support for building SOF as a Zephyr module. This is the starting
point for add SOF audio into Zephyr. Currently builds but does not use
any symbols yet.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:48:48 2020 +0100
WIP soc: adsp-cavs15: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:43:44 2020 +0100
WIP soc: adsp-common: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:36:32 2020 +0000
WIP: soc: adsp-common: cache is common across all Intel ADSP platforms
De-duplicate soc.h cache definitions.
TODO: this needs done for other common functions.
TODO: need to fix include path
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:43 2020 -0700
WIP: soc: cavs25: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:12 2020 -0700
WIP: soc: cavs20: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:06:40 2020 -0700
WIP: soc: cavs18: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 12:37:17 2020 -0700
soc: intel_adsp: use main_entry.S in common for cavs_v15
The files are identical anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:38:14 2020 -0700
soc: intel_adsp/cavs_v15: link common code
Let cavs_v15 link against the code compiled under common/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 13:08:28 2020 +0000
WIP: soc: common: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:37:32 2020 +0000
WIP soc: adsp-cavs15: build power down support
Build the power down support for CAVS1.5
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 12:40:17 2020 +0000
WIP: soc: cavs15: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:30:08 2020 +0000
soc: cavs15: Add missing SHIM registers.
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 9 15:43:01 2020 +0000
xtensa: intel_adsp/cavs_v15: fix usage of LP SRAM power gating
Remove LSPGCTL as it can cause confusion, use SHIM_LSPGCTL instead.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Feb 26 15:28:48 2020 +0000
boards: up_squared_adsp: Use local xtensa HAL instead of SDK HAL
SDK HAL is deprecated for Intel ADSP SoCs so fix and use local HAL
module.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 10:45:15 2020 -0700
soc: add Intel Audio DSP SoC family
This creates a SoC family for the audio DSPs on various
Intel CPUs. The intel_apl_adsp is being moved into
this family as well, since it is part of the CAVS v1.5
series of DSPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:29:02 2020 -0700
soc: xtensa: add CMakeLists.txt
Add CMakeLists.txt under soc/xtensa so that CMakeLists.txt
inside each SoC directory will be included, similar to
what ARM and RISCV have.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:43 2020 -0700
Revert "boards: up_squared_adsp: Add flasher script"
This reverts commit 80f295a9dd.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:32 2020 -0700
Revert "boards: up_squared_adsp: Update logtool tool"
This reverts commit 7770d182c1.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:23 2020 -0700
Revert "soc: intel_adsp: Generalize bootloader"
This reverts commit d6a33ef467.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
soc: xtensa; intel: remove sof-config.h - SQUASH
No longer used.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add option to clear memory slot before writing logs, making reading
logs more easy.
Add timestamp logging option
Add option to enable timestamp for ring buffer backend. Timestamp may
consume little memory we have for ring buffer.
Add timestamp logging option
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The logging subsytsem had if else if constructs without final
else statement. This commit adds else {} to comply with
coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
An execution path could reach a loop that dereferences a pointer in
conditions where the pointer is null. Add a check to the loop
condition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Uart device is unique and thus does not need to be passed through the
logging context. Only the assert() requires a void * cast.
On log_output side, the device usage was removed. It is actually unclear
why it has been set like this since depending on the context, it can be
anything and not specifically a device.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In certain application configuration the networking log backend must not
be started, when the application starts. Starting it must be delayed
until routes to the logging server are established.
This commit introduces a new Kconfig setting to be able to control that
behaviour.
Fixes#27464
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
LOG_BACKEND_SPINEL_LEVEL turned out to be useless and was removed.
Also changes to keep coherence between Zephyr log level and OT log
level added by otPlatLog() were introduced.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
In the function do_net_init() the paths for ipv6 and ipv4 now use the
same api to determine the source address.
Fixes#27428
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
va_list was initialized once and passed to log_backend_put_sync_string()
for each logging backend. State of such va_list was changed in each
execution, resulting in different va_list state to be passed for
consecutive log_backend_put_sync_string() calls. This results in
undefined behavior and program crashes.
Use va_copy() to copy va_list state to temporary variable for each
logging backend and keep original va_list untouched. Pass such temporary
state to log_backend_put_sync_string() to make sure state for all
consecutive calls does not change.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
The log output instances all named "log_output" in backends
collide with the "log_output" parameter of various functions.
This renames the variables in the backends to make them
more descriptive. Same goes for the buffers for some of
these instances as they are all named "buf", and "hostname"
being used in the network backend, so they are renamed.
There are a few places where variables are overriden within
an inner scope (e.g. inside loop and if block) so they are
also renamed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When using net log backend,
adding severity and function name to log message.
The log module name is a useful information when looking
at log entries. This way remote log entries will
contain the log module name.
Signed-off-by: David D <a8961713@gmail.com>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Set 'log_backend_rtt:panic_mode' before calling 'log_backend_std_panic',
because otherwise the RTT backend behaves as if the system is NOT
panicking and tries to do asynchronous writes via RTT_LOCK/UNLOCK.
Signed-Off-By: Andrew Fernandes <andrew@fernandes.org>
Replace DT_CPU_CLOCK_FREQUENCY with a PATH based reference to cpu@0
(DT_PATH(cpus, cpu_0)) and than getting the clock_frequency property:
DT_CPU_CLOCK_FREQUENCY -> DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
This lets us remove DT_CPU_CLOCK_FREQUENCY from dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Ring buffer in memory backend does not depends on xtensa adsp board,
so make it general: remove to log_backend_rb and remove dependency on
up_squared_adsp.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We need a slightly bigger stack to be able to successfully pass the
logging test. Fix the stack size and enable back the test.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This construction was causing errors with recent gccs. If you look
carefully, it's generating the sequence:
simcall
mov a2, a2
mov a3, a3
...which is nonsensical. And now gcc is complaining about it with:
subsys/logging/log_backend_xtensa_sim.c:44:2:
error: invalid hard register usage between output operands
Just emit a single simcall instruction and let the assembly
constraints do their job.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Printk should be processed by the logger if RTT logger backend is
used and RTT console. It is not necessary if console has different
transport.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
RTT backend was treating synchronous mode (LOG_IMMEDIATE) and panic
mode in the same way. That lead to decreased bandwidth since after
each transfer operation backend was pending until RTT data is read by
the host. It is vital only in panic mode to ensure that device do not
reset before all data is read by the host. In synchronous mode that
degrades performance significantly.
Added distinction between those two modes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Algorithm for freeing strdup buffers was only checking if argument
matches address within strdup buffer pool and was attempting freeing
even if format specifier was different than string.
Added fix where also format specifier is checked.
Extended logger test to verify correctness of function which searches
for string format specifiers within a string.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
