posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves signal tests into a singular
testsuite at tests/posix/signals app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
With recent changes the regulatory domain is handled via the hostap
rather than by passing and going through the driver and hostap doesn't
have any option for forcing the regulatory domain, so, add a note to
reflect that this is implementation dependent to cover both hostap as
well other offloaded implementations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of depending on SPI/GPIO. This allows to just enable
CONFIG_LORA=y + DT node in the application layer. The same
pattern is nowadays followed by most drivers.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add DT definitions for the RAK3172 LoRaWAN module, based on
STM32WLE5.
Ref. https://docs.rakwireless.com/product-categories/wisduo/
rak3172-module/low-level-development/
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The dns_unpack_answer() did not check the length of the message
properly which can cause out of bounds read.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the packet parsing fails in dns_unpack_response_query(), then
do not continue further but bail out early.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the error print strings are very similar, construct the final
output at runtime to save some flash space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Follow net coding style and remove extra new lines between
variable set and checking its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We must do null check before trying to access the fields.
Fixes#81980
Coverify-CID: 434549
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These devices have an architecturally fixed 13 MHz clock device. But
thankfully you can put a default into a DTS binding so we don't have
to repeat it for all of them.
Signed-off-by: Andy Ross <andyross@google.com>
Add Zephyr support for the Audio DSP on the MT8196 SOC. This is a
very similar device to previous designs. Most of this patch is just
DTS.
The biggest delta is the more complicated second level interrupt
controller, though it is still able to be represented using some
vaguely clever DTS config over the older intc_mtk_adsp driver.
Also the memory layout is slightly different, requiring a little
indirection to set the initial boot stack address and log output
buffer. And the timer "irq_ack" register bits moved.
Signed-off-by: Andy Ross <andyross@google.com>
New platform has different mappings. Auto-detect rather than parse
dts or similar, as this is is really just a simple format for testing.
Signed-off-by: Andy Ross <andyross@google.com>
The early boot function got renamed to a pseudo-standard "z_prep_c",
but this isn't an actual API and doesn't have a prototype in the
headers anywhere, so the compiler started whining about an undeclared
function.
Signed-off-by: Andy Ross <andyross@google.com>
Add a twister YAML file for these devices. Right now they're flagged
as xt-clang only, though xcc and SOF-derived gcc toolchains are known
to work too. We'll enable the zephyr SDK once sdk-ng support lands.
Signed-off-by: Andy Ross <andyross@google.com>
These are very similar devices to mt8195, minimal changes needed
beyond boilerplate configuration.
In the process, this reworks the board/soc layout to be HWMv2
compliant, with "adsp" becoming a CPU cluster beneath the SOC. So the
name of the boards to west become e.g. "mt8195/mt8195/adsp" (which can
be shortened to "mt8195//adsp" if desired).
Note that the cpuclk driver is not yet ported, it works only with 8195
(the clocking/power architecture seems similar between the parts, but
the graph of wells and clocks is different and historically these have
been three separate drivers in SOF). The biggest changes are in the
image/loader scripts, which needed some rework for cross-device
portability.
Signed-off-by: Andy Ross <andyross@google.com>
This is a feature of the 8195 DSP only, which is used only vestigially
by SOF to store data that nothing reads. The Linux kernel on the
other side uses a shared driver for all 81xx devices, which does not
expose the feature. It seems to work, but it's not worth maintaining
a driver in tree for legacy hardware that will never use it.
Signed-off-by: Andy Ross <andyross@google.com>
Wire the default printk output to the console at boot, just to be sure
we have stdio output good enough to get tests to pass.
Signed-off-by: Andy Ross <andyross@google.com>
This is currently selected by the arch, but some devices (in paticular
xtensa ones which have configurable interrupt setups) might not
actually be able to effect an irq_offload() from within an ISR even
though we have code for it.
Make this a default and not a select so that lower layers can override
the setting.
Signed-off-by: Andy Ross <andyross@google.com>
HD44780 controller can indicate via busy flag whether it's finished
processing current command. This allows for faster completion of HD44780
commands as seen from MCU perspective, as the MCU doesn't have to wait
for fixed long period of time. Implement this functionality.
Signed-off-by: Jan Kuliga <jtkuliga@gmail.com>
If proper power supply is used to power the hd44780, it initializes
correctly on a reset condition all by itself. However,
if the power supply is below its expectations (e.g. some 3.3V Nucleo
board), it won't initialize properly on its own, and the MCU
has to carry out the initialization as listed in the reference manual.
Since we cannot determine it properly in the runtime,
always carry out the initialization procedure.
Signed-off-by: Jan Kuliga <jtkuliga@gmail.com>
In order for the driver to be compliant with the timing sequence
diagrams presented in the reference manual, the MCU has to wait
for some additional period of time while setting both the rs and rw
lines.
Signed-off-by: Jan Kuliga <jtkuliga@gmail.com>
Express delay values in nanoseconds. Set the default delay time values
as specified in the HD44780 reference manual.
Signed-off-by: Jan Kuliga <jtkuliga@gmail.com>
There's no need to set this line every single time a command is sent
to the HD44780. Set it only once, so that one can save some cpu cycles.
Signed-off-by: Jan Kuliga <jtkuliga@gmail.com>
Add a note to status property that disabled parent nodes do not
implicitly disable child nodes.
Issue #82040
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
#79174 incorectly interpreted the condition. If no simulator is found
if cannot be "renode" and therefore robot should be considered unsupported.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Verify the result of the fs_read() operation when handling filesystem
resources, and abort processing the resource in case of errors.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reset the server timestamps after bootstrap to handle a case
where a new server instance has replaced the bootstrap server
instance.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
In case lwm2m_get_engine_obj_field() fails to find a corresponding
object field when iterating resource instances, simply skip that
resource instance when printing object instance contents.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Support write OMA TLV resource instance in LwM2M 1.1.
Accept OMA TLV as default content format.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
The network interface name that is copied to if_req struct might
be missing terminating null for IPv4.
This is fixing the IPv4 issue which was missed in previous fix attempt.
Fixes#74795
Coverity-CID: 368797
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As k_sleep returns int32_t, there is a possibility for integer overflow
during conversion from milliseconds to nanoseconds.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
