Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves stropts into a singular
testsuite at tests/posix/xsi_streams app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
The filter here should be used to filter for capability:
whether the platform configuration supports userspace. And if
it does support userspace, we then enable CONFIG_TEST_USERSPACE
(and thus CONFIG_USERSPACE) for testing. We should not be
filtering for whether userspace is enabled, but should really
be filtering for whether userspace is supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The filter here should be used to filter for capability:
whether the platform configuration supports userspace. And if
it does support userspace, we then enable CONFIG_TEST_USERSPACE
(and thus CONFIG_USERSPACE) for testing. We should not be
filtering for whether userspace is enabled, but should really
be filtering for whether userspace is supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
According to the RISC-V Instruction Set Manual: Volume II, Version 20240411
(Section 3.1.6.6), some implementations may choose to track the dirtiness
of the floating-point register state imprecisely by reporting the state to
be dirty even when it has not been modified. This option reflects that.
Also add a filter in `tests/arch/riscv/fpu_sharing/` based on imprecise
FPU state tracking
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This revert the idea of 3fa7d78 from #78845.
The 3rd level IRQ APIs won't compile when
CONFIG_3RD_LEVEL_INTERRUPT_BITS=0.
Updated testcase accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Some nodelabels in the display build_all test overlay lacked a "test"
prefix, causing test failures on boards that also define displays with
this nodelabel. Prefix these nodes with "test" to resolve this issue.
Fixes#81610
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Changed interrupt priority for GPIO, default 6 is not suitable for
for the ZERO_LATENCY_IRQS function used in this test.
used in this test.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
The tests were using the default of 1 which is very low,
especially when we might have multiple RX streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is more native targets than native_sim and native_posix.
Let's exclude them all by architecture.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit fixes incorrect c prototype and defintion of
stepper_set_callback to stepper_set_event_callback
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Ports the Thread-Metric suite of benchmarks from ThreadX to Zephyr.
This makes it easier for others to run these benchmarks with the
best set of configuration options for their board so that
they can better compare Zephyr performance to another RTOS.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Added a flag parameter so that it is possible
to use the bt_cap_initiator_unicast_audio_stop to perform
disable+stop without releasing the streams by setting the
RELEASE flag.
This allows us to use the bt_cap_initiator_unicast_audio_stop
function to just disable streams without releasing them,
as that is requested by some PTS tests such as
CAP/INI/UST/BV-40-C.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Amend the filtering so that the normal mem_map (with exec) test
is not going to run on Intel Audio DSP SoCs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With the rename of intel_adsp/ace30_ptl to intel_adsp/ace30/ptl,
the "sim" variant no longer inherit the base configuration. So
make a copy of the .conf file to explicitly target the sim
variant.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Increase the conn interval from 30 to 60 for more stability
in test with multiple lower testers (up to 3).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Shorten the timeouts so that the tests are run in 6 second instead
of 15 seconds.
Use only native_sim for the tests so that the tests are run without
any extra delays.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Previously, twister would fail due to a warning being escalated to
an error because CONFIG_NET_TEST was set.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default policy currently directly references the private
variable next_event from policy_events.c to then convert the cycle
of said event (if exists) to a kernel tick in the future, something
policy_events.c already implements and exposes through
pm_policy_next_event_ticks().
Additionally, the implementation of pm_policy_next_state() in
policy_default.c already gets the nearest kernel tick, wherein
the next event has already been accounted for in, see
implementation of pm_system_suspend().
This commit removes the redundant and layer violating computation
if the tick of the next event from policy_default.c and updates
the test test_pm_policy_events to not use default policy to
determine if pm_policy_next_event_ticks() is correct.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The short sleep (10ms) was not enough any more. Increase the sleep
to 100ms so that system stabilizes between checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add tests that verify that stable IIDs generate a proper IPv6
interface identifier described in RFC 7217.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
