hsdk has an on board cy8c95xx I/O expander, and 4 on
board LEDs use the expander GPIO. Add the I/O expander
and LEDs in hsdk dts, then add documents for them.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The NPCX power management code gets a compile error if CONFIG_PM is
enabled but CONFIG_ARM_MPU is disabled.
Signed-off-by: Keith Short <keithshort@google.com>
This commit replaces driver hard coded clk bus and enr definitions with
definitions from device tree.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit fixes missing pclken member if used for h7 series.
Additionally to the check if instance 0 of compatible
st_stm32_flash_controller has defined a clock,
this needs to be checked for compatible st_stm32h7_flash_controller.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds flash clock settings in device tree for stm32h7
series such that the stm32h7 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
It was found that npcx7 series' GPIOs which support low-voltage power
supply, there is an excessive power consumption if they are selected to
low-voltage mode and their input voltage is 1.8V.
To avoid this excessive power consumption, this CL suspends the
connection between IO pads and hardware instances before ec enters deep
sleep mode. Then restore them after waking up.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Switch to the new API. Adds early exits for the ack and retransmit
timers, and replaces a remaining_time() + submit() call with schedule().
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API. Adds check for a pending buffer in the SAR
timeout handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API. Adds a link check to the protocol timeout to
ensure the link is still active.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API. Consolidates reliable sending logic for the first
transmission and the retransmit into one. Adds check for link active in
protocol timeout.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API in Mesh's extended advertising handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API in friend, net and main.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Friend structure allocaction logic is implemented over and over
throughout the friend module. Move it into a static utility function for
readability.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
No area can have 'status: maintained' without a maintainer.
Mark such areas as 'orphaned' instead.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Breathe project has released version 4.29.1, a fix release for the
issues found in 4.29.0. Relax version requirements by just skipping the
buggy version and staying to compatible releases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add GIRQ source definitions
ECIA register structure update
Add missing ADC register field defines
Fix GPIO alternate function field mask
Add Analog comparator register defines
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
work_queue_main() was missing final else statement
in the if else if construct. This commit adds else {}
to comply with coding guideline 15.7. Includes a
context-specific description of why this branch is empty.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_timeout_end_calc() was missing final else statement
in the if else if construct. This commit pulls the last
condition into a final else {} to comply with guideline
15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
set_endpoint() and reset_endpoint() were missing final
else statement in the if else if construct. This commit
adds a final else {} with assert to comply with coding
guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
cleanup_test() was missing final else statement in
the if else if construct. This commit adds else {}
to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The lib/os/ had several places missing final else
statement in the if else if construct. This commit adds
else {} or simple refactor to comply with coding guideline 15.7.
- cbprintf_complete.c
- cbprintf_nano.c
- heap-validate.c
- heap.c
- onoff.c
- p4wq.c
- sem.c
Also resolves the checkpatch issue of comments should align * on
each line.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
register_events() and signal_poll_event() missing final
else statement in the if else if construct. This commit adds
else {} to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_tmcvt() was missing final else statement in the
if else if construct. This commit removes the
else if in this small structure to comply with
guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
bus_fault() and hard_fault() were missing final else statement
in the if else if constructs. This commit adds non-empty else {}
to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_arm_debug_monitor_event_error_check() was missing final
else statement in the if else if construct so violated guideline
15.7. This commit removes the else if for symmetry in the limited
early-exit conditions, rather than empty final else {}, to comply.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
- If device PM is not supported -ENOSYS is returned, update test case to
account for that
- Remove usage of device_pm_control_nop
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Devices that do not require PM should just use NULL.
`device_pm_control_nop` is still kept as an alias to NULL untill all
in-tree usage is replaced with NULL.
Code relying on device_pm_control function now returns -ENOTSUP
(equivalent to calling device_pm_control_nop).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Fixes: #34101
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support for u-blox EVK-NINA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected duplicate pin assignment for i2c1 in dts file
Corrected copyright date in Kconfig.defconfig
Rebase to update test_adc.c
Corrected sda-pin, scl-pin assignments and LED aliases
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Change to use macro DT_FOREACH_CHILD_STATUS_OKAY to avoid routing the
interrupts to the disabled cores.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
