On windows the Magic.from_file method fails to convert a PathLike to its
representation.
Pass using os.fspath.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Main changes since v2.6:
* ext_2G4_phy_v1: Runtime performance optimizations
* ext_2G4_libPhyComv1: Add BT LE HDT support
* ext_2G4_channel_Indoorv1: Add BT LE HDT support
Note: Like before, bsim remains fully backwards compatible
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
968d55ff22579080466bf2f482596dd6e35361c6
Including the following:
968d55f 54LM20: Also build CRACEN RNG
2c6d49d CRACEN RNG: Add model of the new version of the IP
914b475 54LM20: Add first version
fb68cc6 grtc hal replacement: Remove pointless macro use
ef2f63e Fix wrong NRF_UARTE register reference
63a2e85 README: Clarify the models are not perfect, and correct links
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Current code would have systematically tried to add the FS_O_CREATE flag
when opening a file in read mode. This effectively made it impossible to
open files to read them on read-only file systems.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace the slew-rate based method of delaying signals with a more
appropriate I/O delay. Also update the comment to better describe
what we are now doing.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Modify the STM32 pinctrl driver and SoC-specific pinctrl macros
to introduce support of the st,stm32n6-pinctrl variant.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Use the new and appropriate "st,stm32n6-pinctrl" compatible for the pinctrl
in DTSI for STM32N6 series.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add a new binding for the pinctrl controller of STM32N6 series.
The specificity of this series is the "I/O retime" feature not present on
other series. This new binding exposes pinctrl properties to configure this
feature.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Fix typo in errno which isn't caught when building since ENONET
is also a valid code, despite not being defined (nor allowed?)
in Zephyr proper.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
SphinxLint doesn't need to report trailing whitespace errors as it's
already checked by checkpatch.pl.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Set the status of the pwm_leds node in the Raspberry Pi Pico
overlay to "okay". Without this change, the serial output shows
"PWM-based LED fade. Found 0 LEDs" and the led doesn't light up
on the Pico.
Signed-off-by: Saifan Rafiq <saifanr@gmail.com>
The PHY is necessary for a high speed USB connection.
Same code as on the closely related lpcxpresso55s69.
Signed-off-by: Fabian Otto <fabian.otto@rohde-schwarz.com>
Move .bss and noinit sections to the end to reduce
binary size when the output format doesn't support
skipping empty space.
Signed-off-by: Andrew Lewycky <alewycky@tenstorrent.com>
Check that the channels are configured with the reference
ADC_REF_INTERNAL when compiling the driver.
Signed-off-by: Colin Evrard <colin.evrard@mind.be>
- Adding support for GPIO_DISCONNECTED mode.
- Removing redundant interrupt configuration logic from the
.pin_configure API (already handled in pin_interrupt_configure).
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Only by default enable NXP_WIFI_TC_RELOCATE for RW612, which will
relocate traffic API into RAM. But for other platform, for example
the RT series, the ITCM/DTCM is a more suitable place for critical
code.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
CONFIG_GNSS_LUATOS_AIR530Z_SATELLITES_COUNT
and CONFIG_GNSS_U_BLOX_M8_SATELLITES_COUNT
would unnecessarily be in .config file.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Allow optimization if high speed is not supported. Unify strings for
error logging. Allow the application to enable/disable the USB device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replaces space with an equal sign when assigning the clang configuration
file to the --config parameter. This change improves compatibility with
tools that parse the compilation database and expect compiler arguments
to be separated by space.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
According to user manual UM3448, spi2 is connected to
the ST Arduino header.
This has been confirmed using the spi_loopback test driver.
Also update documentation.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
When the quad-enable-requirements property is set to "NONE" or is not
present, no Quad Enable operation should be performed.
This fixes an issue with the mx25uw6345g flash chip that is present
on the nRF54h20 DK and supports the Single I/O mode, but cannot be
used in that mode.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Category: Null pointer dereference (CWE-476)
Corrects the logic that validates the result of mipid04_get_format_desc().
Previously, the check was inverted, which could lead to a NULL pointer
dereference when accessing desc->pixelformat.
Fixes Coverity CID: 525183
Signed-off-by: sudarsan N <sudarsansamy2002@gmail.com>
Some DMA and LP wrappers were missing for MAX32660 which caused build
errors on CI runs. Update hal_adi to get the necessary fixes.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Few rules are duplicate and are reported multiple times, so disable
those from pylint and rely on ruff reporting them.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit enables the Random Nb Generator peripheral
instance (RNG) on the target board nucleo u385rg_q
from STMicroelectronics.
Signed-off-by: Khaoula Bidani <khaoula.bidani-ext@st.com>
Make sure network interface contains information when the operational
state was changed. After boot, the value is set to 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When enumerating controls with VIDEO_CTRL_FLAG_NEXT_CTRL, if child devices
have controls with IDs lower or equal to the ones in the parent devices,
those controls will be accidentally skipped.
Fix this by resetting the query's ID and tracking of the queried device in
the query when moving to the next device in the pipeline.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Signed-off-by: Josuah Demangeon <me@josuah.net>
In both implementation, when comparing received data length take into
account that the buffer obtained from bt_buf_get_tx() stores the type at
the top. The buffer types are H:4 and in the TX path we need to check for
BT_HCI_H4_* types not BT_BUF_*.
In the legacy implementation, the hci_acl_pkt_len() function obtains the
length from the USB transaction buffer, which does not contain a buffer
type at the top.
In the new implementation, partially revert the changes and restore
hci_pkt_get_len(), this will be required for any further changes anyway.
Fixes commit f85d63a6cc ("Bluetooth: Remove USB H4 mode support").
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add check for invalid microstep resolution directly in api to avoid the
check in each and every driver
Set microstep resolution is made a mandatory function now as all
stepper drivers support it and hence should implement it
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Release the SPI during the deinit to put respective GPIOs in low-power
state or disconnected.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
By default QSPI is uninitialized after every transaction, so, deinit is
a no-op, but if QSPI_LOW_POWER is disabled, then we need to uninitialize
the QSPI in the deinit.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Correct XSPI configuration in order to improve PSRAM access on the
STM32N6 discovery board.
Ideally, this should be defined by device tree, but I'm fixing
the only user for now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Combining the two regions provides enough memory to
successfully build applications.
Note that SRAM1 and SRAM2 are continuous regions.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
-add nucleo_u385rg_q overlays files
for testbench purpose.
- add platform_exclude property to skip test on boards
with little ram size.
Signed-off-by: Khaoula Bidani <khaoula.bidani-ext@st.com>
