Set the L2CAP TX MTU default to fit the public key packet in a single
L2CAP fragment. This matches the configuration for RX buffer lengths
being set with this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove discardable buffer dependency on the specific implementations
except for HCI raw.
All of the in-tree Host-side HCI drivers have implemented discardable
buffer behavior.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add macros for calculating buffer sizes, accounting for the various
L2CAP and HCI headers needed as well as the reserved bytes needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit implements the missing OpenThread APIs related to CSL
receiver configuration.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
esp_reset() is called from net_if init function, which holds net_if lock
after commit 24b49f4399 ("net: if: Add locking"). At the end of
esp_reset() there is a blocking wait on `sem_if_up` semaphore. This
semaphore can be release only by esp_init_work(). esp_init_work()
however blocks on net_if operations, because net_if init function (which
invokes esp_reset() underneath) is still holding net_if lock. As a
result there is a deadlock, because esp_reset() and esp_init_work() are
both waiting on each other.
Remove waiting for `sem_if_up`, so that net_if init can exit and release
net_if lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This patch fixes a bug of SPI driver for SiFive FE310.
Current implementation sends/receives only first buffer even if
an user passed two or more struct spi_buf to driver.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This commit fixes the flash latency calulation in clock_control_init
for stm32wb and stm32wl series:
For these series new_hclk_freq can't be used to set the flash latency,
because the flash clk uses a different prescaler.
Without this fix, the flash latency could be set to an inadequat value
in cases wehere the new AHB3/AHB4 prescaler is different from the
new cpu1 prescler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds missing initialization of rcc prescalers for
stm32wb and stm32wl series when hse or hsi are selected as
system clock.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
stm32wb only has a single msi clock range, in contrast to wl, l4, l5
which have a second range that is active after exit from standby mode.
This difference must be taken account of in the driver.
This commit abstracts __LL_RCC_CALC_MSI_FREQ macro such that all series
can be supported, additionally the switch to the msirange
(LL_RCC_MSI_EnableRangeSelection) is now only executed on series
that support it.
As a result stm32wb socs can use msi as sysclock.
The same should be done for stm32l0, but this commit series limits
the scope of socs to avoid getting too bloated.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commmit restructures the clock_controller code such that the cpu2
prescler assignment later can be excluded for single core socs.
The stm32wl mcu line has variants with a single cortex-m4 core
(stm32wle5), therefore the prescaler for the second clock should
only be set for dual core socs.
This commit still checks for the complete series
(CONFIG_SOC_SERIES_STM32WLX) as the single core variants are not
yet introduced, later the condition should check for a flag like
CONFIG_SOC_STM32WL5X instead.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit fixes several occurences where a struct members is wrongly
dereferenced, which causes a compile error in case the msi clock is used
as system clock.
Only affects stm32wb and stm32wl with MSI selected as sysclock.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The changes to re-organize the power mgmt header files exposed a
build failure on thingy53_nrf5340_cpunet since CONFIG_PM can't be
set on that platform. We already exclude nrf5340dk_nrf5340_cpunet
so just add thingy53_nrf5340_cpunet to the platform_exclude list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit continues simplifying the generation of
isActiveFlag/clearFlag funtion pointer array for the request generators
and does the same for the table_ll_channel.
Additionally move struct dmamux_stm32_channel to c file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit uses dt property dma-channels instead of ll defines to
make sure every soc has correct number of function pointers defined.
While commit 5f6218a tried to fix this for g0 series, this caused
regression for other series(e.g. stm32g431). Using UTIL_LISTIFY and
dt properties this should finally be fixed and reduce boilerplate code.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
doxyrunner plugin replaces a series of CMake+Python hacks. These include
input changes tracking and incremental build output simulation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
zephyr.doxyrunner Sphinx extension is meant to replace multiple Python
and CMake scripts into a single Sphinx extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace the restore modification times with a new script that is more
specific to the Doxygen+Sphinx needs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added radio interface to save and restore radio ready
timestamp. This will be saved between ISO Subevents and
used in done event for anchor point synchronization and
drift compensation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Put the testcase test_catch_assert_in_isr() to execute last, to prevent
it affects other test cases. Because when we caught an assert failure
in the ISR handler, it cannot be guaranteed that all the current
program status would be recovered.
Fixes#34844.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
NRFX UARTE would write to user supplied buffer on IRQ without checking
whether or not the supplied buffer had available space left to write
one char
Signed-off-by: Arne Edholm <arne.edholm@assaabloy.com>
A badly written sector close ate that has correct crc8 could allow
jumps outside the assigned flash area. This behavior is fixed.
A possibility existed that a badly erased sector or a incomplete write
of a large item created a empty closed sector. This has been fixed by:
a. Erase verification.
b. Clearing such a sector at startup.
Fixes#34382
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Co-Authered-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This PR add 2 module test cases:
- test_smp_release_global_lock() and test_smp_release_global_lock_irq()
verify z_smp_release_global_lock() works.
And 1 integration test cases:
- test_inc_concurrency() to verify parallelly increase operations will
fail if not applying synchronization on SMP.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Running xtensa-esp32-elf-objdump -d -S zephyr.elf leads to lag on
macOS. Hence this property is removed from binutils.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
west build generates binary file of around 13MB. Use esptool to
generate proper binary file
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Update shell L2CAP to use the new delayable work API for the delayed
received confirmation response.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update GATT to use the new delayable work API for the delayed
calculation of the database hash and the service changed indication.
When the database hash characteristic is read the hash work needs to be
canceled if in progress and if currently executing wait for it to
complete so that the threads don't both write to the stored value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the connections to use the new delayable work API for the
deferred work host timer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update AVDTP to use the new delayable work API for the send host timer.
The AVDTP protocol is incomplete, there is no cancelation of the timer
but it is also never started, as there is no users of the internal
functions, and no public functions exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the implementation of controller based privacy to use the new
delayable work API for the RPA timer. Always use schedule for the
timer since RPAs should not be used more than the configured RPA
timeout.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update RFCOMM to use the new delayable work API for the RTX host timer
used for disconnecting and idling.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the periodic sync sample to use the new delayable work API
for blinking the LED.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
