This CMake variable contains a path to a CMSIS-SVD file from nRF MDK,
which describes the selected Nordic SoC.
Initially, this will be used as an argument to nrf-regtool.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add nrfx and Kconfig related infrastructure plus SoC initialization
code to allow building for nRF54H20 targets (Application and Radio
cores).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move code that prepares `NRFX_CONFIG_GRTC_*` definitions based on
information from devicetree from the nRF54L15 nrfx_config header
to the global one, so that the code can be used by nRF54H20, too.
The checks that validate owned-channels and child-owned-channels
DT properties are moved to the nrf_grtc_timer driver so that
the global nrfx_config is not polluted unnecessarily.
The default values in nrfx_config_nrf54l15_enga_application.h
are restored to those from the corresponding template file.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... to cover missing __ICACHE_PRESENT and __DCACHE_PRESENT symbols that
should be defined in MDK files.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated API version enables multi-instance GPIOTE driver.
Additionally obsolete symbol that was used to specify
API version in the past was removed.
Affected drivers have been adjusted and appropriate changes
in affected files have been made.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Introduce possibility to override `NRFX_DIR` sybol from hal_nordic's
CMakeLists.txt file that specifies source dir for the nrfx drivers.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Changes in the macro statements that allows to build
with -Wudef flag enebaled, without errors.
Signed-off-by: Patryk Lipinski <patryk.lipinski@nordicsemi.no>
Rename local usbd copy from nrfx_usbd to nrf_usbd_common and use it in
both USB stacks. Renaming header to nrf_usbd_common.h allows breaking
changes in exposed interface. Mark all doxygen comments as internal
because local usbd copy should not be treated as public interface
because we are under refactoring process that aims to arrive at native
driver and therefore drop nrf_usbd_common in the future.
Use Zephyr constructs directly instead of nrfx glue macros.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Copy nrfx_usbd code from zephyrproject-rtos/hal_nordic git revision
d054a315eb888ba70e09e5f6decd4097b0276d1f. This enables us to refactor
the code towards a native driver in a step by step manner where the
smallest changes that bring biggest performance improvements are done
early on.
The code is not a vanilla copy from zephyrproject-rtos/hal_nordic.
The code was reformated with clang-format to match project style.
Manual modifications were done to change comments formatting, place
constant comparisons on the right and add blank lines to pass Zephyr
compliance check.
Relicense to Apache 2.0.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Now it is needed to explicitly use NRF_GPIOTE1 instance
in nrfx_gpiote driver for non-secure builds.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
According to cmake documentation, in the `if(<string>)` expression
the string evaluates to false unless its value is one of the true
constants. Thus, the commands under `if(${uicr_path})` are never
executed. Use `if(DEFINED uicr_path)` instead, since `uicr_path`
is returned by `dt_nodelabel()` and it will be undefined if such
node does not exist.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Also set the HAL variant appropriately when building for
the new nrf53_bsim boards.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that the HAL's system init function configures the reset GPIO as
nRESET if requested by the user.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
If the users configures this option in devicetree, ie,
```
&uicr {
nfct-pins-as-gpios;
};
```
CMake will inject the HAL-specific CONFIG_NFCT_PINS_AS_GPIOS definition,
so that the necessary operations are performed during system init.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This commit introduces Kconfig symbols for enabling logging
for each nrfx drivers in Zephyr.
Example Usage:
To enable logging for the NRFX ADC driver, add the following
line to the project's configuration file (prj.conf):
CONFIG_NRFX_ADC_LOG=y
The purpose of this change is to enable selective logging
in Zephyr for specific nrfx drivers.
Signed-off-by: Natalia Pluta <natalia.pluta@nordicsemi.no>
A Kconfig symbol mapping is necessary to enable logging for specific
nrfx drivers in Zephyr, allowing the association of these symbols with
their corresponding nrfx-specific symbols.
Signed-off-by: Natalia Pluta <natalia.pluta@nordicsemi.no>
nRF USBD ISOINCONFIG register controls USBD behavior after receiving IN
token addressed to ISO IN endpoint when the endpoint was not armed with
data. The options are:
* NoResp, in which case there is no response (i.e. bus timeout)
* ZeroData, in which case device responds with ZLP
This commit both makes the ISOINCONFIG value configurable and changes
the default from NoResp to ZeroData. For reference, DWC_otg controller
will always send ZLP in such case and does not have NoResp equivalent.
Automatically sending ZLP when ISO IN endpoint is not armed resolves
periodic audio dropouts observed on Mac OS with USB Audio headset
sample. Apple USB Audio class driver will attempt recovery (abort all
pending URBs, switch to alternate config 0, switch to active alternate
config and submit new URBs) every time it sees kIOReturnNotResponding
status code. During recovery no audio data can be transferred and
therefore there are gaps in the audio stream.
Apple USB Audio driver sees kIOReturnNotResponding when there is bus
timeout (i.e. IN token was sent to nRF when the endpoint was not armed
and NoResp option was active). Activating ZeroData option results in
perfectly fine (albeit short) packet that does not trigger interface
recovery and thus fixes the USB Audio issues on Mac OS.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Reworked QDEC SHIM to suppor multi-instance peripheral. Patch includes
Kconfig alignment for proper instance handling.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Although existing nRF SoCs have only one I2S instance, the nrfx_i2s
driver has now multi-instance API and the related nrfx configuration
symbols need to be used appropriately.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF9161 is technically a SiP (System-in-Package) that consists of
the nRF9120 SoC and additional components like PMIC, FEM, and XTAL,
so for nrfx/MDK the nRF9120 SoC is to be selected as the build target,
but since the nRF9161 is what a user can actually see on a board, using
only nRF9120 in the Zephyr build infrastructure might be confusing.
That's why in the top level of SoC definitions (for user-configurable
options in Kconfig, for example) the nRF9161 term is used and nRF9120
underneath.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF HW models have been updated to correspond to a 52833 instead
of a 52832. Let's follow them.
The motivation for the change is to enable proper BIS encryption support
(for BT LE Audio ISO).
Changes:
* Point in manifest to latest HW models
* SOC_COMPATIBLE_NRF52832 has been removed, and SOC_COMPATIBLE_NRF52833
added in its place (with no uses at this point)
* Where SOC_COMPATIBLE_NRF52832 was used to set encryption like for a 52832
(to avoid using the MAXPACKETLENGHT), we set the condition to just
SOC_NRF52832.
Note: The MAXPACKETLENGHT register exists in the new simulated nrf52833,
thought it does nothing.
* In the BLE ctrl LLL radio HAL, all macros are renamed accordingly
(timings are NOT changed).
* Board dts definition now refers to the 52833 soc definition. New 52833
features set as not supported by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enabling by default (if SPI3 used) because it affects all revisions
since "Engineering B", including the most recent one as of today
(revision 3).
Size changes when enabled:
- -Og: flash +160 bytes (+0.02%), RAM +8 bytes (+0.01%)
- -Os: flash +144 bytes (+0.02%), no change to RAM usage
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Switch to use newest 2.10 API version in nrfx by default.
It changes signature of user callback in the nrfx_ipc driver.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
This commit adds API version symbols. The symbol is used in nrfx
drivers, where new API-breaking changes are introduced. Symbol
guards conflicting API.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Move the RX (MISO) delaying capability information to Devicetree. It is
done using 2 properties:
- rx-delay-supported: enabled on SPI nodes that support delaying RX.
This property can be used by the driver to determine if this
capability is supported or not on a given instance.
- rx-delay: the actual RX delay value
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When the SYS_CLOCK_EXISTS Kconfig option is not enabled, k_busy_wait()
has no implementation, so in such case, call nrfx_coredep_delay_us()
directly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to bring consistency in-tree, migrate all modules code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change dependencies of the Kconfig options that enable particular nrfx
drivers so that the drivers and their instances are available when
a devicetree node with a corresponding compatible property exists,
no matter if it is enabled or not.
Change the options that enable compilation of multi-instance drivers
to be promptless helpers only (not directly configurable for users),
as they need to be enabled only together with some options that enable
particular instances of a given driver, and those options select them
as needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of including from nrfx_glue.h a specific Zephyr Bluetooth
controller header file that defines PPI and GPIOTE resources to be
reserved for exclusive use by the controller, include a file with
only a fixed name and expect the chosen Bluetooth controller to
provide the location of this file in include paths. This way, when
a different Bluetooth controller implementation is used downstream,
a different file can be easily pointed to.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
