Enable the device runtime power management on the SPIM shim.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Kconfig names follow the convention CONFIG_I2C_driver-name. Rename
RENESAS_RA_I2C_IIC to I2C_RENESAS_RA_IIC to align this config name
with all others.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Some ARC processor configurations have separate memory for code (ICCM)
and for data (DCCM). Such configurations are unsuitable for LLEXT,
except for some quite special cases. For now, disable LLEXT and its
tests for these devices completely.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Update sltb010a,slwrb4180a, xg24_dk2601b and xg27_dk2602a boards
descriptions in order to run dma test. Also update boards
documentations.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Added sltb010a,slwrb4180a,xg24_dk2601b and xg27_dk2602a boards files
to run chan_blen_transfer, loop_transfer and scatter_gather tests.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Open up the hello_world_multiplatform filter to run on any PR changing
anything in scripts. This should catch twister regressions as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
With gitv2.26, git rebase uses "git merge" mechanism instead of "git
apply". This creates a rebase-merge folder in .git, in case of rebase
conflict. This caused problems in self hosted runners due to old
rebase-merge folder. This commit deletes this folder before git rebase
action.
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
Originally, when the timer's source clock is 32.768 kHz, the timer driver
uses two consecutive reads to ensure the timer reading is correct.
However, it is not robust enough due to an asynchronous timing issue in
the chip. The workaround is to add at least two NOPs between the
LDR and CMP instructions. This commit implements the workaround in the
assembly code to ensure it is not affected by the compiler toolchain
or optimization flags.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Commit adds `diag transmit` used for transmission IEEE802154 packets
in specific amount and interval.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit aims to improve the integration of `esp_wifi_drv` by
providing the link mode information to `wifi_mgmt` when a station device
is connected to the AP.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Fix ICCM/DCCM properties both in DTS and in MDB settings to match the
original hardware configuration.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
As these boards are completely simulated and do not represent any real
hardware configurations anymore, provide them with 1M of both ICCM and
DCCM to avoid any out-of-memory test failures.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Fix ICCM/DCCM properties in DTS to match the intended configuration,
along with some other minor inconsistencies.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
The default exponent is 0, will cause twt setup quick failed,
set exponent value derived from twt interval to fix it.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add device definitions in dt to test drivers that handle
multiple "compatible"s by a single driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Compilation will fail if multiple models are used at the same time.
Changing to define different unique names for the symbols
to avoid conflicts.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
In the case of IPV6 not enabled, when NET_SOCKETS_PACKET is enabled,
the sizeof(struct sockarr) will change to 20, the value of
MCUMGR_TRANSPORT_NETBUF_MIN_USER_DATA_SIZE is 8, which is not able
to pass the compilation, so I change its default value to 20.
Fixes#82757
Signed-off-by: Hongquan Li <hongquan.prog@gmail.com>
Add preprocessor function that returns 'y' if any enabled node with
compat does NOT have a certain property. This is different from using
dt_compat_any_has_prop to check that they ALL don't have the property.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add WIFI_SAP_IFACE_NO_IR state to keep same as hostapd_iface_state,
which is updated as the hostap upmerge.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For CMD 'wifi ap status', removing HAPD related definition to make it
more commonly used for non-supplicant case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
