Don't check 'HEAP_MEM_POOL_SIZE != 0', as HEAP_MEM_POOL_SIZE might be 0,
but HEAP_MEM_POOL_ADD_SIZE_xxx is defined, which means the actual heap
size is not zero. So check KERNEL_MEM_POOL instead.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Use HEAP_MEM_POOL_ADD_SIZE_ to add heap for NXP Wi-Fi. For supplicant
case, define less heap, as CONFIG_HEAP_MEM_POOL_ADD_SIZE_HOSTAP and
CONFIG_HEAP_MEM_POOL_ADD_SIZE_SOCKETPAIR are also enabled.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Set TWT response parameters to zero to avoid
uninitialized values and ensure correct behavior.
Signed-off-by: Triveni Danda <triveni.danda@nordicsemi.no>
Pretty print XML reports with tab identation on levels for better
readability and ease text diff there as well.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The testcase.classname properties in `twister_report.xml` and
`twister_suite_report.xml` now contain the full testsuite name
(without its path prefix) instead of just two its dot-separated
leftmost components. This way `twister_report.xml` testsuite container
has no duplicate testcase elements with the same `classname` and `name`
properties executing with --no-detailed-test-id for a project with same
testcase names in its 'sibling' suites, for example`tests/kernel/sleep`.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extend `--no-detailed-test-id` command line option: in addition to its
current behavior to exclude from a test Suite name its configuration path
prefix, also don't prefix each Ztest Case name with its Scenario name.
For example: 'kernel.common.timing' Scenario name, the same Suite name,
and 'sleep.usleep' test Case (where 'sleep' is its Ztest suite name
and 'usleep' is Ztest test name.
This way both TestSuite and TestCase names follow the same principle
having no parent object name prefix.
There is no information loss in Twister reports with this naming:
TestSuite is a container object for its TestCases, whereas TestSuite
has its configuration path as a property.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Currently, MT25 flashes were running in 3-byte mode.
This is not compatible with the chip we use in our project (MT25QU01GBBB),
as only 128 Mbit of its 1 Gbit can be addressed.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
The user data size of the RFCOMM tx pool is zero. There is not enough
space to put the tx_meta data. Use CONFIG_BT_CONN_TX_USER_DATA_SIZE to
set the data size for the RFCOMM tx pool.
Signed-off-by: Make Shi <make.shi@nxp.com>
These functions can be used to join pthreads in a non-standard way.
The function pthread_tryjoin will not block and simply test whether the
thread has exited already. The function pthread_timed_join will only block
until the specified time. The functions are wrappers for calling the
k_thread_join with timeout K_NO_WAIT and with a specific timeout as opposed
to calling it with K_FOREVER.
Signed-off-by: Cla Galliard <clamattia@gmail.com>
To facilitate changing this driver, decouple rtio from functions not
specific to RTIO. This also requires moving the sdk driver handle
creation outside of the configure call. An effect of this is we can
stop initializing an unused sdk driver handle for the dma path.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
These changes:
* Fix the check of the word size to be more useful
- check min frame size instead of max
- check for min word size requirement
- add a clarifying comment about what the word size represents in
hardware since the nomenclature from zephyr does not match the nxp
references
* Add a clarifying comment about half duplex being supported by hardware
* Add LPSPI_ namespace to defines
* Change chip select error message to be more clear about the problem
* Move the check of the clock device being ready to the lpspi init,
instead of checking it every time on configure. It probably also makes
more sense to not ready the lpspi device if the clock is not ready.
* Move the bare-metal configuration of bit fields AFTER the SDK Init
call.
* Return the proper error code if clock control call errors.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add device definitions in dt to test drivers that handle
multiple "compatible"s by a single driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Compilation will fail if both adin2111 and adin1100 are used
at the same time.
Changing to define different unique names for the symbols
to avoid conflicts.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
To avoid compilation on boards that do not have arduino_i2c defined,
we will clarify that it is dependent on it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Disabling the memory slab pointer validation improves the performance
of the memory allocation sub-test by about 9%.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Makes the validation of both allocated memory slab pointer and the
memory slab pointer to free configurable.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Resets uart tx fifo during driver initialization to have a well defined
initial condition mainly preventing unwanted characters being sent
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
We have now fully migrated to CRYPTO_ALT which is a superset, so, remove
unused CRYPTO module and it's related files.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Most users won't be interested in the per-channel rules but only in the
country code, so, add a verbose option to hiden per-channel rules which
are too verbose.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In order to prepare for extending the options, convert to getopt long
for easier parsing of options.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
No need for an extra step to enable feature in the driver as it clearly
depends on the supplicant feature.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The API docs state that the uart_poll_out is a blocking call,
but it does not specify how long a call to this function should
block the calling thread. This is described in the UART driver
documentation.
This patch clarifies the API docs and alignes it with the driver
documentation.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Add a testcase for the stm32F412 or stm32F413
configuring the SDIO clock at 48MHz from the PLLI2S
Tested on the stm32f413h disco kit.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a function to compute the clock48 from the clock tree
of a stm32f412/f413 mcu. The value depends on its clock source
Requires to identify the PLL source HSE or HSI.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
