Added io-channel-cells to the binding as is standard for
the ads1x1x binding. Additionally, this prevents an issue where
you cannot compile due to the length of this property being
longer than expected.
Signed-off-by: Connor Weekes <cweek24@gmail.com>
The memory offset starts the second DRAM memory area as if the resource
table took a whole 1MB, but it only takes 1KB. Shift the region start
address back to the right spot.
Update the docs to make the memory sizes more clear.
Signed-off-by: Andrew Davis <afd@ti.com>
A couple of ADI boards/shields were missing images. The images come from
their respective product pages on analog.com and then converted to webp
format.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Some simulators - like simics - may end up adding extraneous suffixes to
logged lines. This may cause some regex that match too much fail. This
patch fixes two such cases:
- regex to find RunID changed to only match valid hexadecimal
characters;
- regex to match start of testsuite changed to only match valid word
characters (0-9A-Za-z_).
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This adds a proper, concise, title property to a bunch of bindings for
which the first sentence of their description (which used to be a
makeshift title) was really long
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A binding documentation shouldn't be referring to "driver", so this
commit reworks the description accordingly, and sets a title now that
binding files can have one.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add missing curly braces in if/while/for statements.
This is a style guideline we have that was not enforced in CI. All
issues fixed here were detected by sonarqube SCA.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Turns off time slicing as these tests do not expect time slicing and
previously operated without time slicing, but now fallback to the new
default of a time slice size of 20 added in e337b7b. This explicitly sets
the time slice size to 0.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Turns off time slicing as these tests do not expect time slicing and
previously operated without time slicing, but now fallback to the new
default of a time slice size of 20 added in e337b7b. This explicitly sets
the time slice size to 0.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Add wsen_itds_2533020201601 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
Updates the scheduling documentation to include references to the
time slicing Kconfig options to make them easier to notice.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Sets CONFIG_TIMESLICE_SIZE=0 for tests that previously expected to run
without timeslicing enabled, and now fail with the default
CONFIG_TIMESLICE_SIZE=20. Note that timeslicing functionality is still
included, but no actual timeslicing is performed.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Sets the default for CONFIG_TIMESLICE_SIZE to 20 to approximate the
historical clamping behavior that was removed in 405611d.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
This dependency was always there but not explicitly defined.
By adding the explicit dependency it becomes more obvious
what is wrong when SPI is enabled but GPIO disabled.
This was found when building `samples/bluetooth/peripheral`
for `nrf54l15dk/nrf54l15/cpuapp` with `CONFIG_GPIO=n`.
Before we got:
- A linker error in `spi_nrfx_common.c` failing
to reference some nrfx_gpiote APIs.
- A linker error in `spi_nrfx_spim.c` failing to reference
the GPIO dts entry.
Now we will get a warning of that GPIO is not enabled
With this it becomes more obvious that SPI driver is enabled by
default because of the external flash mounted on the DK.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Adds a devicetree overlay file for the firmware loader image which
sets the code partition to slot 1, which is where the firmware loader
image resides
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add Microchip MEC5 HAL based mec_assy6941 evaluation board to
the Zephyr SPI loopback driver test.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
SPI driver for Microchip MEC5 HAL based QSPI controller. QSPI
hardware supports full duplex, dual, and quad operation. MEC5
QSPI controller also includes three local DMA channels per
direction to off load firmware. The driver API supports full
or half-duplex. Due to QSPI hardware not supporting one wire
half-duplex, this driver supports full-duplex only. QSPI hardware
design requires it to control chip select and current hardware
supports up to two chip selects. Zephyr's SPI DT macros store the
child SPI device's reg properity as the "slave" member of the SPI
configuration structure. The driver uses the "slave" value as the
chip select. Additional timing settings specific to SPI flash devices
are in a new SPI device YAM file: "microchip,mec5-qspi-device.yaml"
which includes the standard "spi-device.yaml". If the new YAML is not
used, the QSPI controller will use default timing values for chip
select and I/O line taps.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Using pre-defined values displayed on datasheet's table 5-4 for
CMM Update Rates.
Please note that datasheet specifies these Update-Rates may have
up to 7% standard deviation, which may be significant for certain
applications.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
This patch introduces rm3100 magnetometer sensor, with basic
support (only read-decode).
This driver has bus support for I2C.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
On some series, use of Delay Block could be possible on OSPI device but
not on HSPI one (which uses this drivers).
As a quick fix check the presence of XSPI Delay Block by-pass
configuration bit instead of the Delay Block presence.
Note: This fix works because we don't have cases today where this driver
is used for OSPI and HSPI instances with mixed DLYB compatibility.
This may have to be reviewed one day and may require a more complex fix
with instantiable configuration, but this day may never come as well.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
When running in a Windows environment, convert the slash direction to
match that used in config.psa and config-psa.h to eliminate the issue.
Signed-off-by: Tiffany Hsieh <thsieh@atmosic.com>
Remove `nios2` from list of available runners as it's just been dropped
with commit 5fe84d5b69
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe changes users need to do in their out of tree board definitions
after the SoC DTS files have been moved into subdirectories.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Align xg29 directory with other Series 2 families, introducing
separate .dtsi files per device family inheriting the common
xg29.dtsi file.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Arduino pn D10 is connected to port A pin 15
according to UM3292 - Rev 2.
This pin is used in tests/drivers/gpio/gpio_basic_api.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Support ctimer for NXP frdm_mcxa153 board, correct Core clock
frequency to 96MHz.
Test using tests/drivers/counter/counter_basic_api.
Signed-off-by: Neil Chen <cheng.chen_1@nxp.com>
Enables system PM and standby mode to
verify that the wdt driver correctly handles
PM3 mode.
Signed-off-by: Alex Rodriguez <alejandro.rodriguezlimon@nxp.com>
