This CL replaces all DT_ prefix with NPCX_DT_ for all macros used
for providing npcx device information in soc_dt.h It avoided the
ambiguity with the DT_ prefix for system DT macros/defines.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Channels 4..7 are multiplexed on adc16. The NXP HAL exposes
ADC16_SetChannelMuxMode but this function is not yet included
in Zephy. The following patch adds channel-mux-b to the dts
enabling the use of the alternate channels of 16 bit adc.
Signed-off-by: Andreas Dröscher <github@anticat.ch>
Set stm32_dt_pinctrl_configure function as the unique entry point
to STM32 DT pinctrl management.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
ADC shell commands can be only executed on the property label
existing in the device tree. It is realized by the dynamic subcommand
returning existing ADC Label.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The channel command has been extended with subcommands: id, positive,
and negetive. Some boards require positive input configuration before
measurement can be started.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Use dedicated shell macros so argument count can be validated before
the command handler is executed. This change simplifies the command
handlers implementation inside the adc_shell file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Changed gain and reference commands to dictionary commands.
This change removes an obsolete look-up table (string <-> value)
for gain and reference commands.
Now, each modification of gain or reference value will require only
a dictionary command update.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This part of common code for ADC drivers, the adc_context_enable_timer()
function, was still converting sampling interval values to milliseconds
(the only option available at the time this code has been created) when
setting up the kernel timer, consequently limiting the maximum sampling
frequency to 1000 samples per second. This patch switches the routine
to specifying the interval in microseconds, to remove this limitation.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Suppress -Wchar-subscripts warnings when building with Newlib, by
casting isdigit() parameter to unsigned char.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If shell is enabled then enable all sub-shells if their dependencies are
satisfied. This was done for some modules and subsystems but was not
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set the thread name for the data acquisition thread in the TI LMP90xxx
ADC driver to aid in debugging and profiling.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The driver-specific config_info structure referenced from the device
structure is marked const. Some drivers fail to preserve that
qualifier when casting the pointer to the driver-specific structure,
violating MISRA 11.8.
Changes produced by scripts/coccinelle/const_config_info.cocci.
Some changes proposed by the script are not included because they
reveal mutation of state through the const pointer, though the
code works as long as the driver-specific object is defined without
the const qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add support for ADC on H7 series. Note that ADC1 and ADC2 share the same
register set, so it is added as "adc1_2".
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove semicolon between instance invocations of DT_FOREACH_IMPL_ and
thus DT_INST_FOREACH. This provides more flexibility to the user. This
requires we fixup in tree users to add semicolon where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Had an extra comma between macro and macro usage that casued the
following compile error:
adc_shell.c:477:22: error: expected expression before ',' token
Easy fix to remove trailing comma in ADC_SHELL_COMMAND
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make drivers multi-instance wherever possible using DT_INST_FOREACH.
This allows removing DT_HAS_DRV_INST in favor of making drivers just
do the right thing regardless of how many instances there are.
There are a few exceptions:
- SoC drivers which use CMake input files (like i2c_dw.c) or otherwise
would require more time to convert than I have at the moment. For the
sake of expediency, just inline the DT_HAS_DRV_INST expansion for
now in these cases.
- SoC drivers which are explicitly single-instance (like the nRF SAADC
driver). Again for the sake of expediency, drop a BUILD_ASSERT in
those cases to make sure the assumption that all supported SoCs have
at most one available instance is valid, failing fast otherwise.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace having dts_fixup.h files define DT_ADC_{0..2}_NAME with using
the new devicetree.h macros. We test to see what driver compat is
enabled via DT_HAS_COMPAT and set DT_DRV_COMPAT to that compat. Than we
can utilize the DT_INST_LABEL() macro to extract the name of the device.
We also replace the Kconfig ADC_{0..2} symbols with DT_HAS_DRV_INST.
This will allow us to remove those Kconfig symbols as this was the only
usage.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_INST_MCP320X* to just INST_DT_MCP320X*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rework the devicetree to utilize new DT_INST macros and extract per
instance data for clocks from devicetree.
We add a property ('calib-offset') for the SAM{D,E}5x family of SoCs
that is the bit position offset from ADC0 BIASCOMP in the NVM Software
Calibration Area Mapping. For ADC0 this is typically 0 and for ADC1
this will be 14.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked adc_sam_afec driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We can remove
various defines from dts_fixup.h now as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Like other STM32 series the STM32L4x SoCs have an internal voltage
reference source that need to be enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert the LMP90xxx ADC driver from using k_sleep() to using
k_msleep() in order to resolve a compilation error caused by passing
an int to k_sleep().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use the new devicetree API. Remove per-board enabling of ADC_0 by
setting ADC_0 to default y when the 'adc' node label points at an
enabled node of the expected compatible (depending on SoC).
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
DT_CALL_WITH_ARG() is an internal implementation detail that should
not be used outside of devicetree.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Run the int_literal_to_timeout Coccinelle script to fix places where
it is clear that an integer duration is being passed where a timeout
value is required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
