This add support to pinctrl at Atmel sam0 usb dc driver. It updates
all boards with new pinctrl groups format and drop pinmux entries.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam usb drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Enable second usb EHCI if usb2 node has status="okay" Note that this
driver is still an single instance driver, this change simply enables
the driver to work with the usb2 peripheral if that one is enabled, and
usb1 is disabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MCUX usb ISR was making usb callbacks directly, which caused assertion
failures when a callback attempted to lock a mutex. Move USB callback
handler to separate thread, and make ISR notify thread via message
queue.
Fixes#40638
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The PINCTRL_DT_(INST_)DEFINE macros already defined the trailing ;,
making its usage inconsistent with other macros such as
DEVICE_DT_DEFINE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This flag may cause host to more ambitious power saving behavior,
not all Zephyr USB classes or applications may be ready for this
now. Allow to disable option USB_DEVICE_REMOTE_WAKEUP.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use the new pinctrl API to configure pins.
Additionally, rename usb_pinctrl to usb_pcfg to better fit
new pinctrl API.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fill in received bytes in USBIP_RET_SUBMIT packet
Currently this field is unconditionally set to 0 and therefore not
filled in conveniently. This may mislead the USB host which is correctly
acknowledged that the transaction was sucessful but it cannot check the
actual received bytes.
Test application:
```python
import usb
data = (0xFF, 0xFF)
print("Opening loopback device")
device = usb.core.find(idVendor=0x2FE3, idProduct=0x0009)
print("Writing test data", data)
written = device.write(0x1, data)
print("Written", written, "bytes")
```
Before:
```
$ ./test_loopback.py
Opening loopback device
Writing test data (255, 255)
Written 0 bytes
```
After:
```
$ ./test_loopback.py
Opening loopback device
Writing test data (255, 255)
Written 2 bytes
```
Signed-off-by: Raúl Sánchez Siles <rsanchezs@k-lagan.com>
Use DT_INST_ENUM_IDX_OR and always default to full-speed
if CONFIG_USB_DC_HAS_HS_SUPPORT is not set or maximum-speed
property is not defined.
Remove low-speed setting since device stack does not support it.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the current USB device support, the sizes of bulk endpoint
are mostly configure through Kconfig and do not care if a device
is high-speed capable. The information if a USB device controller
supports high-speed comes from devicetree. Add a Kconfig option to
map this information and configure bulk endpoint sizes
accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Check return value from recv() passed by usbip_recv().
Fixes: #39849Fixes: #39869
Coverity-CID: 240221
Coverity-CID: 240244
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Kconfig USB_DEVICE_REMOTE_WAKEUP option depends only on
USB device controller capability, but is not controlled
by the USB device controller drivers configuration.
Move USB_DEVICE_REMOTE_WAKEUP option to drivers and
make it promptless.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit enables the HSI48 clock for the stm32U5 soc family
to use the USB device peripheral.
Enable the VDD USB voltage supply.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Use of '__DEPRECATED_MACRO' was not compatible with the way macro
is used later in this driver.
Remove it and keep the warning as vector for deprecation information.
Additionally, replace DT_NODE_HAS_PROP with DT_INST_PROP as
using the former is not recommended with boolean properties.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add a Kconfig option, similar to the one that is already available
for nRF5340, that allows enabling the REG0 (VDDH) DC/DC converter
in nRF52840. Make use of this option in Nordic boards: nRF52840 DK
and nRF52840 Dongle.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This changes "__nocache K_HEAP_DEFINE()" to use the new
K_HEAP_DEFINE_NOCACHE() macro. This fixes a build error
as K_HEAP_DEFINE() is specifying its own linker section
so that it is no longer possible to specify another
linker section.
Fixes#38108
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add logging for NRFX_USBD_EP_ABORTED event inside
control transfer events handling, otherwise "Unexpected event"
error message in this regard confuses the users.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add sam4l full finite state machine based on Atmel Software Framework.
This allows driver detect protocol errors and sync all requests. This
version is compliance with Linux USB tests.
Note: Tests are timing sensitive and log may affect results.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
1. Add support for NXP LPC USB controller
2. Do not check the return value from the
kUSB_DeviceControlRun command as not all SDK drivers
return a value
3. Use the kUSB_DeviceControlPreSetDeviceAddress
command to set device address
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The USB configuration option is actually a global switch
to enable USB drivers in general, but currently only
the device controller drivers are meant.
USB device controller drivers also have USB_DEVICE_DRIVER option.
Thus the option USB is actually redundant and can be replaced
by the self-explanatory option USB_DEVICE_DRIVER.
The name USB itself is not unique and should not be used as an
configuration option.
With these changes the option USB_DEVICE_DRIVER generally
enables USB device controller drivers. The option USB_DEVICE_STACK
enables USB device support. It is sufficient to enable only option
USB_DEVICE_STACK because it selects USB_DEVICE_DRIVER.
CONFIG_USB Kconfig option is temporary added to subsys/usb/Kconfig.
This is necessary to pass CI and will be removed again
when the USB configuration has been adapted in modules.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use macros and types from usb/usb_ch9.h header where it
is possible. This patch also adds local macros, USB_REQTYPE_GET_DIR
and USB_REQTYPE_GET_TYPE, which is an intermediate solution and
these will be removed later.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This is called in ISR context and timeout must be set
to K_NO_WAIT.
Reported-by: Pieter De Gendt <pieter.degendt@basalte.be>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The SoC driver name is 'USB High-Speed Interface (USBHS)'. This rename
from usb_dc_sam to usb_dc_sam_usbhs allowing add others SoC drivers
like 'USB Device Port (UDP)' that is found at SAM4S/E variations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add configurable attached event delay. Delay can be used to give
USB Charging Controller time for initialization.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
To allow transition to device tree based clock configuration on
stm32 targets, rework clock_control driver to use intermediate
STM32_ macros initially defined as the equivalent Kconfig macros
for now.
Propagate the change in all code using these macros.
The reason to introduce these new macros instead of configuring
Kconfig flags using dt kconfigfunctions is that we'll need
to be able to inform users that Kconfig flags are deprecated
once the whole family conversion is done, to encourage
out of tree users to adopt this new configuration scheme.
Note: For now STM32H7 series and code is excluded.
This is the same for some series specific code such as
PLL mul/div for L0/L1 and XTRE prescaler on F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If a loaded endpoint was disabled and then reconfigured,
it is not possible to start an IN transfer and
usb_dc_ep_write() returns -EAGAIN.
Call ep_ctx_reset() to clear endpoint operations flags
and reset buffer after endpoint is disabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Fixes#34092
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
* Assumes that the USB2_OTG peripheral is being used in FS mode, as on
the NUCLEO-H743/753.
* Disable ULPI on USB2_OTFG, enable FS clk.
* Enable USB voltage detect and disable USB reg, per STM app notes.
Signed-off-by: Jeremy Wood <jeremy@bcdevices.com>
Use ep_idx in usbip_send_common() instead of endpoint address
and get direction from endpoint address.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB setup packet is a part of USBIP_CMD_SUBMIT, but missing
in struct usbip_submit. This patch fixes it and removes
usbip_skip_setup() and adds an additional integrity check
in handle_usb_control().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The transfer length is not stored and processed properly.
Use struct usb_ep_ctrl_prv, which we already have, to store
the transfer length and data. Move usbip_recv() to
handle_usb_control() and handle_usb_data(),
and explicitly copy USB setup packet.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Call the IN callback only if data in usb_dc_ep_write()
is actually written to the intermediate buffer and sent.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use pointer to struct usb_ep_ctrl_prv, which allows to remove
a few variables and simplifies subsequent improvements.
Use consistently ep_idx in handle_usb_control() instead of
ntohl(hdr->common.ep).
Revise logging so that it is clearer what event is being processed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The comments at the beginning of the file are not quite correct
and instructions regarding configuration are not necessary at all.
Also remove the redundant first line.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For historical reasons, the maximum speed of the Atmel SAM USB
controller is done by comparing the maximum-speed property string from
the DT using strncmp at runtime.
Now that the DT_ENUM_IDX macro exists, we can use it to get the
maximum-speed property at build time and without string comparison.
Unsupported speed can also be reported at build time.
Note that the default speed in case the optional maximum-speed property
isn't present in the DT is changed from full-speed to high-speed to
match the property description. This is a no-op in practice as this
properties is defined at the soc level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The STM32F105xx USB clock goes through a prescaler either PLL1 x2 /2
or PLL1 x2 /3, the output of this must be 48 MHz. As such, the output
of PLL1 must be 48 MHz or 72 MHz.
NOTE: This requires that the system is running from PLL1 (PLLCLK).
Support for running from PLL2 will be implemented in the future.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
