Add nrfx_grtc related entries that were introduced in nrfx 3.4.0,
especially NRFX_GRTC_CONFIG_AUTOSTART that should be by default
set to 1.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
NRFX_IRQ_PRIORITY_SET is defined as empty. This causes an unused
argument warning in many callers (e.g. nrfy_gpiote_int_init). Fix it by
using ARG_UNUSED for the priority argument.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
We will touch these lines in the next commit. Convert the comment style
to C89 instead of C99 and the indentation to tabs instead of spaces.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
Add support for propagating SOC_NRF54LX_DISABLE_FICR_TRIMCNF and
SOC_NRF54LX_SKIP_GLITCHDETECTOR_DISABLE values to nrfx.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
- add new entries that appeared in nrfx 3.4.0
- correct the default IRQ priority value for PPR (it is intended to be
the lowest prority, so unlike for ARM cores, for RISC-V it should be
the lowest value)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Include into compilation the nrfx_gppi_dppi_ppib helper and related
interconnect layers when DPPIC nodes are enabled in DTS. Provide macro
definitions required by those interconnect layers based on information
from devicetree (the nrf_grtc_timer is only modified because a macro
that it uses became more generic).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For use nRF 802.15.4 Radio Driver on nRF54L series there is
necessary update for nrfx_glue.h file. It follows the pattern
used for other nRF family members.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Add nrfx configuration file to make the nrfx HAL work for
nRF54H PPR core.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extend Kconfig definitions and nrfx_config translations so that UARTE
instances that are available in nRF54H20 can be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This CMake variable contains a path to a CMSIS-SVD file from nRF MDK,
which describes the selected Nordic SoC.
Initially, this will be used as an argument to nrf-regtool.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add nrfx and Kconfig related infrastructure plus SoC initialization
code to allow building for nRF54H20 targets (Application and Radio
cores).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move code that prepares `NRFX_CONFIG_GRTC_*` definitions based on
information from devicetree from the nRF54L15 nrfx_config header
to the global one, so that the code can be used by nRF54H20, too.
The checks that validate owned-channels and child-owned-channels
DT properties are moved to the nrf_grtc_timer driver so that
the global nrfx_config is not polluted unnecessarily.
The default values in nrfx_config_nrf54l15_enga_application.h
are restored to those from the corresponding template file.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... to cover missing __ICACHE_PRESENT and __DCACHE_PRESENT symbols that
should be defined in MDK files.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated API version enables multi-instance GPIOTE driver.
Additionally obsolete symbol that was used to specify
API version in the past was removed.
Affected drivers have been adjusted and appropriate changes
in affected files have been made.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Introduce possibility to override `NRFX_DIR` sybol from hal_nordic's
CMakeLists.txt file that specifies source dir for the nrfx drivers.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Changes in the macro statements that allows to build
with -Wudef flag enebaled, without errors.
Signed-off-by: Patryk Lipinski <patryk.lipinski@nordicsemi.no>
Rename local usbd copy from nrfx_usbd to nrf_usbd_common and use it in
both USB stacks. Renaming header to nrf_usbd_common.h allows breaking
changes in exposed interface. Mark all doxygen comments as internal
because local usbd copy should not be treated as public interface
because we are under refactoring process that aims to arrive at native
driver and therefore drop nrf_usbd_common in the future.
Use Zephyr constructs directly instead of nrfx glue macros.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Copy nrfx_usbd code from zephyrproject-rtos/hal_nordic git revision
d054a315eb888ba70e09e5f6decd4097b0276d1f. This enables us to refactor
the code towards a native driver in a step by step manner where the
smallest changes that bring biggest performance improvements are done
early on.
The code is not a vanilla copy from zephyrproject-rtos/hal_nordic.
The code was reformated with clang-format to match project style.
Manual modifications were done to change comments formatting, place
constant comparisons on the right and add blank lines to pass Zephyr
compliance check.
Relicense to Apache 2.0.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Now it is needed to explicitly use NRF_GPIOTE1 instance
in nrfx_gpiote driver for non-secure builds.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
According to cmake documentation, in the `if(<string>)` expression
the string evaluates to false unless its value is one of the true
constants. Thus, the commands under `if(${uicr_path})` are never
executed. Use `if(DEFINED uicr_path)` instead, since `uicr_path`
is returned by `dt_nodelabel()` and it will be undefined if such
node does not exist.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Also set the HAL variant appropriately when building for
the new nrf53_bsim boards.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that the HAL's system init function configures the reset GPIO as
nRESET if requested by the user.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
If the users configures this option in devicetree, ie,
```
&uicr {
nfct-pins-as-gpios;
};
```
CMake will inject the HAL-specific CONFIG_NFCT_PINS_AS_GPIOS definition,
so that the necessary operations are performed during system init.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This commit introduces Kconfig symbols for enabling logging
for each nrfx drivers in Zephyr.
Example Usage:
To enable logging for the NRFX ADC driver, add the following
line to the project's configuration file (prj.conf):
CONFIG_NRFX_ADC_LOG=y
The purpose of this change is to enable selective logging
in Zephyr for specific nrfx drivers.
Signed-off-by: Natalia Pluta <natalia.pluta@nordicsemi.no>
A Kconfig symbol mapping is necessary to enable logging for specific
nrfx drivers in Zephyr, allowing the association of these symbols with
their corresponding nrfx-specific symbols.
Signed-off-by: Natalia Pluta <natalia.pluta@nordicsemi.no>
nRF USBD ISOINCONFIG register controls USBD behavior after receiving IN
token addressed to ISO IN endpoint when the endpoint was not armed with
data. The options are:
* NoResp, in which case there is no response (i.e. bus timeout)
* ZeroData, in which case device responds with ZLP
This commit both makes the ISOINCONFIG value configurable and changes
the default from NoResp to ZeroData. For reference, DWC_otg controller
will always send ZLP in such case and does not have NoResp equivalent.
Automatically sending ZLP when ISO IN endpoint is not armed resolves
periodic audio dropouts observed on Mac OS with USB Audio headset
sample. Apple USB Audio class driver will attempt recovery (abort all
pending URBs, switch to alternate config 0, switch to active alternate
config and submit new URBs) every time it sees kIOReturnNotResponding
status code. During recovery no audio data can be transferred and
therefore there are gaps in the audio stream.
Apple USB Audio driver sees kIOReturnNotResponding when there is bus
timeout (i.e. IN token was sent to nRF when the endpoint was not armed
and NoResp option was active). Activating ZeroData option results in
perfectly fine (albeit short) packet that does not trigger interface
recovery and thus fixes the USB Audio issues on Mac OS.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
