Adds mimxrt1060_evk and mimxrt1064_evk boards to the platform_allow list
for the smp_svr sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1060_evk device tree
to support mcuboot and storage on the external QSPI flash. This flash is
rated for 100K minimum program-erase cycles per sector, therefore this
partition configuration supports approximately 100K / (3072/128) = 4167
upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1064_evk device tree
to support mcuboot on the internal QSPI flash. This flash is rated for
100K minimum program-erase cycles per sector, therefore this partition
configuration supports approximately 100K / (1984/64) = 3225 upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is always defined since:
755d09e149 include/drivers/clock_control: stm32: Update for STM32F1
support
So the condition has currently no effect and causes the prescaler to
always be set to /2.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Renamed offset and offset_units to offs and offs_unit to be
consistent with rest of the other structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ULL reference count decrement to be performed before the
done events are handled, so that correct reference count is
used to determine if events are pending in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update HCI driver implementation in the controller to
process a list of controller events by traversing net buf
frags.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reorder Channel Selection Algorithm #2 and Minimum Number of
Used Channels Procedure bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix regression in central initiated terminate introduced in
commit 3a80785947 ("Bluetooth: controller: Fix connection
terminate to happen on event done").
The regression caused an additional central connection event
transmitting PDU after the previous connection event had
received acknowledgment for the terminate_ind PDU from the
peripheral.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we want to test conn on legacy and ext adv, we need scanx to
handle connection more than once. Change local flag to global and
let it indicate whether we want scanx to initaite connection when
device is scanned.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
'disconnected' callback always unrefs conn object, but this is only
valid if connection was created in scanx since app owns reference to
that conn object. In case of advx, app does not own any reference so
should not unref.
Basically we do not really need to hold any reference to conn object
in either scanx or advx so just drop reference immediately after conn
is created in scanx, no need to worry about it later.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Do not report auxiliary PDUs as advertising reports when in
initiator state on auxiliary channels.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ensure that the advertiser address type and address is setup
in both 1M and Coded PHY scanning instance when extended
create connection is enabled on both the PHYs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When connection is initiated in one of either 1M or Coded
PHY initiating scan instance then the other scanning
instance's scheduling and memory allocation needs to be
cleaned up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reserve an additional node rx buffer when Extended Initiator
is supported as the received ADV_EXT_IND PDU is being
buffered in the auxiliary channel scanning instance and is
only released/flushed in the done event of the initiating
auxiliary channel radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed incorrect LLL context used to generate done event for
auxiliary channel scanning. Other minor comments and fixes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reset the scanning context for the PHY not selected in the
Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This allows to initiate a connection on secondary advertising channels,
i.e. when advertises uses advertising extensions.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When in initiating state we need to handle ADV_EXT_IND as in regular
scan sice we always want to scan AUX_ADV_IND in order to be able to
connect.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to take RX chain delay and PHY used to send CONNECT_IND into
account when calculating 1st connection event offset.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
On secondary advertising channel transmitWindowDelay depends on PHY
used to create connection so we need to adjust it.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We will need the same checks for AdvA and TargetA/InitA in lll_scan_aux
so let's make them public and use address explicitly instead of passed
via pdu.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We can use the same code to create both CONNECT_IND and AUX_CONNECT_REQ
since they are basically that same PDUs.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Correct thee dt overlays for the STM32 boards, so the Zephyr
image starting address is in accordance with what TF-m expects
it to be.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Decrease the submitted work delay, to ensure that the PSA
crypto operation will be preempted when the work fires. The
modification is required for devices with fast crypto
operations. Also minor corrections to the test ase name,
so it is not the same with the other arm_thread_swap test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an entry in the release notes regarding the
support for non-blocking secure calls in Zephyr.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For testing secure->non-secure thread swapping.
This also tests that the FP context is correctly preserved
when calling a secure function.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
When ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS is enabled, if FPU is
being used (CONTROL.FPCA == 1), store all FP registers before
entering the secure function, and restore them afterwards.
This is needed if any NS thread or ISR that interrupts the secure
function uses FP registers. If they do, a secure UsageFault occurs
unless this change is applied.
This allows k_sched_lock() and k_sched_unlock() to be dropped when
ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS is enabled.
Enable ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS by default when
building TF-M.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This adds code to swap_helper.S which does special handling of LR when
the interrupt came from secure. The LR value is stored to memory, and
put back into LR when swapping back to the relevant thread.
Also, add special handling of FP state when switching from secure to
non-secure, since we don't know whether the original non-secure thread
(which called a secure service) was using FP registers, so we always
store them, just in case.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Introduce a Kconfig option to allow Secure function calls to be
pre-empted.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
