This update Atmel sam afec driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format. In addition, it
add overlay files to allow run samples/drivers/adc example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam usb drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam counter driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam i2c drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format. This add missing
i2c-0 alias into sam4l_ek board.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam spi driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam serial drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update current Atmel sam pinctrl initiative to current Zephyr
pinctrl API. It update current devicetree bindings and add the sam
pinctrl driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Many board peripherals are enabled by turning on a 3V3 buck-boost
converter, controller by P0.31 (NRF_PS_EN). Use the regulator framework
instead of custom init code.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In case the CTE request was executed as a single shot and Controller
successfully received LL_CTE_RSP PDU there was an assertion.
The assertion was caused by not completely prepared notification PDU.
The notification PDU was send towards Host by CTE request handling code
due to an error in lp_comm_complete function. If the CTE request was
single shot it went into wrong if-else statement, despite that the
LL_CTE_RSP was correctly received.
A check if-clause if the procedure is periodic should not affect the
procedure completion. It should affect whether req_expire counter has
to be restored.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This is a follow up to commit a1ab8da862.
Several calls to the dt_node_bool_prop function in Kconfig.nrfx for
the counter drivers are done with wrong parameters. The function
expects a full node path, but it is provided with only the node name
component.
Fix those by using dt_nodelabel_bool_prop instead, as such function is
available now and it is more suitable for such cases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow up to commit a1ab8da862.
Handle the case when a node with the specified label does not exist.
Unlike edt.get_node(), edt.label2node.get() retuns None then, it does
not raise edtlib.EDTError.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The list of files which are included in the `build.spdx` SPDX SBOM document
is based on the files recorded as build artifacts based on the CMake
file-based API metadata response.
In some situations, such as the case indicated in #42072, a build artifact
may be reported by CMake but no such file is present on the system
following the build. This results in the `build.spdx` SPDX SBOM being
invalid, as a result of trying to provide metadata for a non-existent
file (and specifically being unable to provide its checksum).
This commit fixes this bug by omitting files from `build.spdx` if they
do not exist on disk after the build is complete, even if the CMake
metadata claims that they should. The resulting SPDX document should
then be valid.
Fixes#42072
Signed-off-by: Steve Winslow <steve@swinslow.net>
Add support for S2B1 quad-enable-requirements.
Add wrsr call for various QER modes
S2B1v6 mode tested with Winbond W25Q128JV series and pp4o and read4io
commands.
Signed-off-by: Zack Cornelius <zcornelius@securityesys.com>
Fixes a case for the asynchronous UART API where
only single buffer was attached to the UART, after
filling this buffer release event was trigger first
time and after disabling UART the release event was
triggered again for the same buffer.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The driver is already enabled when turning CONFIG_DISPLAY on and
enabling the display node in Devicetree.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The simplest way of getting networking to work on really tiny embedded
system is to use an extra serial port as an interface to external world
with help of a SLIP,
see https://en.wikipedia.org/wiki/Serial_Line_Internet_Protocol.
The catch is on a deeply embedded system we most likely won't see
an Ethernet MAC in the system as it might be as large ans as complex
as the CPU itself so there's no point in adding it. Moreover it will
require support in drivers, which are very hardware specific
(not only IP-block specific, but also need to take care of all the quirks
made in this particular instance and platform).
But with SLIP we may use existing serial port of the board which already
has all the needed support and with a platform-agnotic code of SLIP
we may have usable networking on both simulators & real HW boards.
And that's what we do in Zephyr.
Now we teach ARC's QEMU platform to do so as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
PineTime hardware can measure the battery voltage via an ADC pin. Define
this as a `voltage-divider` in the board dts. This enables the sample
`boards/nrf/battery`.
Signed-off-by: Casper Meijn <casper@meijn.net>
Added the stop_bits_client parameter to the modbus_serial_param struct.
Being able to configure the number of stop bits for the client
independently from the parity setting, allows to support connecting to
modbus server that do not follow the MODBUS over Serial Line Specification
and Implementation Guide.
Signed-off-by: Constantin Krischke <constantin.krischke@lemonbeat.com>
Signed-off-by: Jan Geldmacher <jan.geldmacher@lemonbeat.com>
Enable the alt function with setting both bit5@0xf016f1 and
bit6@0xf02046 bits will cause internal leakage.
Only bit6@0xf02046 bit is required to enable the alt function,
so fix it.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Change NVS and FCB backends to look for chosen `zephyr,settings-partition`
in the first place, or fall back to partition "storage" if the chosen
is not set.
Signed-off-by: Alexander Mihajlovic <a@abxy.se>
New ARCv3 GNU toolchain uses hs6x mcpu value for hs6x CPUs, the older
one allows to use any mcpu value.
Update old 'arc64' mcpu to 'hs6x' to be aligned with new toolchain
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
New ztest API is available in those places:
subsys/testsuite/ztest/src/ztest_new.c
subsys/testsuite/ztest/include/ztest_test_new.h
This requires also changes in Twister code during parsing c files to
find properly test suites and testcases.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Extend scope of searching src directory with defined test source code.
In some cases for optimization reason src direcotry is placed in parent
directory (in relation to testcase.yaml file placement). This changes
allow to detect such situations.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Test wirtten in ztest framework should print in output information about
test suite name defined in test's source code (as a first argument of
ztest_test_suite() function). This changes make it possible to find such
test names in c files. Next they are used during test execution to
verify if performed test was performed properly (verification can base
not only on existance of "PROJECT EXECUTION SUCCESSFUL" info).
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add a dummy driver for the `vnd,pwm` compatible to allow compilation of
drivers utilising PWM when running "build_all" tests.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Modify serial and serial_pty option availability verification in DTU
object in device_is_available method to avoid situation when empty string
passed as serial in hardware_map.yaml cause hang up Twister in this
place.
Fixes: #41169
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
ARRAY_SIZE was recently changed to a size_t instead of
a long. Update the log statement to use correct
string format.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The board had an internal "library" to configure pins in an Arduinoeish
fasion. This is no longer used, so can be removed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Specify in DT the pin to enable I2C pull-up connection
- Always build board.c, so that the I2C bus is always pulled-up
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Most sensors are enabled by enabling the VDD_ENV output. Define a
regulator on DT for that and enable the regulators if sensors are
enabled.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The board has a user LED attached to P1.09. This information was
hardcoded in board C files and enabled by default. This is something
applications need to do if needed (note that an always ON LED can incur
a considerable power consumption).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It's not clear why the board configures debug/tracing functionality
using HAL low level code, remove it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
