This header file declares the functions that rely on `bluetooth/conn.h`.
This collects `testlib/connect.h`, `conn_ref.h` and `conn_wait.h` into one.
Initial documentation for the functions in this file is also added.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This patch fixes the include of `atomic_builtin.h` and `atomic_arch.h`
so that they are IWYU. This mean they compile correctly independent of
other includes at the include-site. It was nessessary to move the
definition of the atomic types out of `atomic.h` to avoid unsatifiable
circular dependencies between `atomic.h` and `atomic_builtin.h`, as well
as definition conflicts between `atomic_arch.h` and `atomic_builtin.h`.
The definition of the type was to moved to a new file `atomic_types.h`.
The include in `atomic.h` has a IWYU pragma which will preserve
backwards compatibility with code expecting the types to be defined in
`atomic.h` if we start linting for IWYU.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This add regulator driver for Smartbond DA1469X SOC.
Driver can control VDD, V14, V18, V18P, V30 rails,
full voltage range supported by SOC is covered.
For VDD, V14, V18, V18P DCDC can be configured.
Special VDD_CLAMP (always on) and VDD_SLEPP are added
to allow configuration of VDD in sleep modes.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Improved the updates to the name ID metadata (NVS_NAMECNT_ID) item
in the Settings NVS backend implementation. The improvements should
make the implementation more robust in handling edge cases such as:
power downs, resets or a case in which the storage partition is
full. In the last case, the NVS backend could return an ENOSPC error
in the context of the settings_delete API. This change also fixes
this issue.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This is called already as soon as the polling thread starts, so the call
in the gpio init function is harmless but redundant, drop it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When the matrix is connected to consecutive pins on the same port, it's
possible to read the whole row or set the whole column in a single
operation. For the column, this is only possible if the matrix is
configured for driving unselected column, as there's no API to configure
multiple pins at the same time at the moment.
This is more efficient than checking the pins individually, and it's
particularly useful if the row or columns are driven from a GPIO port
expander.
Add some code to detect the condition and enable it automatically as
long as the hw configuration supports it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add an option to drive inactive columns to inactive state rather than
high impedance. This is useful if the matrix has isolation diodes for
every key, as it allows the matrix to stabilize faster and the API for
changing the pin value is more efficient than the one to change the pin
configuration.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Only RTC can be used as the idle timer for cortex-m systick. Set the
chosen node as RTC by default.
The idle timer will be enabled only if PM management is set.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Allow enabling the Cortex-m idle timer only if power management is set.
It doesn't make sense to use an idle timer without PM.
It allows adding the idle timer chosen node to dts without enabling the
idle timer by default. Now, the PM config has to be set as well.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Fixes and issue with a variable that has been renamed but whose
reference in the source file has not
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Implement test cases:
LightweightM2M-1.1-int-303 - Cancel observations using Observe with
Cancel parameter
LightweightM2M-1.1-int-305 - Cancel Observation-Composite Operation
Modify existing Leshan API to passive_cancel().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Test case:
LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
is now working as Leshan added a support for reading the root path.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement write and remove attributes command for Leshan.
Remove all written attributes at the end of test, so it won't
affect the next test case.
Remove skip marks from testcase that is fixed on Leshan side.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim
And add native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This pointers need to be writable by the power management code,
but were declared as const, resulting in a fault
for platforms which prevent writing to RAM containing const
values.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When a client uses wildcard subscription and a new message is
published to the matching topic for the first time, the gateway
sends REGISTER message to the client, containing the exact
topic name and a new topic ID.
This change fixes adding these topic ID and name to the internal
topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Add a function to MQTT-SN library API to get topic name by ID
from the internal topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Enable native_sim for this test.
Switch from native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable native_sim for these tests (platform_allow filter)
Switch from native_posix to native_sim as default test platform
And switch overlays from native_posix to native_sim
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
Switch overlays from native_posix to native_sim.
And move overlays into a boards/ directory
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
For gpio_enable_disable_interrupt, also filter with
platform_allow to save time, as the dt filter requires cmake
to be run, but only the platforms with overlays provided
by the test can be run.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default
test platform, switch overlays to native_sim.
For the HW test, filter whole posix arch to speed
up twister run.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform.
For test with overlays, switch overlays and platform_allow from
native_posix to native_sim.
For tests without overlays, enable also in native_sim, and
set native_sim as integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable all remaining bluetooth tests for native_sim
and switch from native_posix to native_sim as default
test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And add overlays for native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable these tests for native_sim and switch
the default integration platform from
native_posix to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
How to run tests is described in the twister documentation,
let's not replicate that kind of instructions in all files.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this tests for native_sim and switch
the default integration platform to be native_sim
from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Annotate posix_exit() and nsi_exit() as noreturn
mainly to ease the life of static analysis tools.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align with native_simulator's upstream main
7d652dbfb313260cf07d595ccf26638f2b3c2959
Which includes:
* 7d652db Provide macros for noreturn and unreachable & annotate
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a Kconfig option to extend the row type to 16 bits, allowing the
library to handle a 16 row matrix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
