Add function that enables or disables CTE sampling attached to received
periodic advertising PDUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
ULL may request LLL to start receiving and sampling CTE attached to
end of periodic advertising PDUs. When the CTE is successfully sampled,
LLL should report collected samples to ULL.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Nordic Radio perihperal provides possiblity to get value of CTEInfo
field parsed from received PDU. It is faster to get the information
from Radio register than parse a PDU content.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add function to enable CTE receive and sampling. The function
is aimed to be used by code in lll_sync.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable or disable CTE sampling during periodic advertising sync evnet
it is requireq to change the event duration. To make it possible new
function was added that handles the operation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
lll_sync object is used to store information for LLL to enable
or disable CTE sampling. The commit adds initialization of
lll_df_sync member of lll_sync.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable or disable CTE sampling in periodic advertising scanner LLL
implementation lll_sync is extended by lll_df_sync member.
The lll_df_sync is a double buffer for lll_df_sync_cfg.
It will be used by LL thread to enable or disable CTE sampling and
provide configuration for sampling CTE in AoA mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add handling of Direction Finding node_rx_iq_report type in ULL.
This is required to correctly deliver IQ samples collected by
LLL during receive of PDU including CTE.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CTE sampling enable or disable requests should be provided to LLL.
Double buffer of lll_df_sync_cfg is added to lll_sync for that purpose
Thanks to that:
- there is no need to synchronize LLL with LL thread
- LLL has always access to valid configuration (new or former)
The configuration is stored in double buffer as instances
of lll_df_sync_cfg, not as pointers. This is the only
difference between double buffer pattern used to store adverising PDU.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new structure lll_df_sync_cfg to store DF configuration
for periodic advertising synchronization.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add functions that will allow to mangage IQ reports memory pool
e.g. allocate or relase new IQ report nodes.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new kind of node_rx type that will store IQ samples report.
The structure includes node_rx_hdr and may be used by the same
queues that are used to forward regular node_rx_pdu objects
between LLL and ULL.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add HCI_LE_Connectionless_IQ_Report event that will allow controller
to report received CTE and provide collected IQ samples to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new command HCI_LE_Set_Connectionless_IQ_Sampling_Enable that
will allow host to enable CTE sampling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
All commands are put in the file according to OpCode Command Field
increasing order. bt_hci_cp_le_set_cl_cte_tx_enable was written in
wrong position. This commit moves it to correct one.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction Finding support requires possibility to receive and sample CTE
attached to periodic advertising PDUs. New option will be used to enable
or disable the functionality. New option is introduced to avoid using
double statements checking if BT_CTLR_DF_CTE_RX and BT_CTLR_SYNC_-
-PERIODIC are enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To avid enabling HCI drived debugging, like in other controller source
files, Direction Finding has its own option BT_CTLR_DF_DEBUG_ENABLE.
This gives fine grained control deubgging output.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Set to disabled not yet implemented Direction Finding features.
The features will be enabled by default when they are implemented.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
IQ samples report requires information about antenna switch pattern
that was used to measure RSSI. RSSI is measured during PDU receive.
For Nordic Radio peripheral the PDU antenna is selected by first antenna
switch pattern set in SWITCHPATTERN register. That pattern is providded
by device tree. This information is already available in radio_df.c.
The information is required by LLL, that has access to functions
provided in radio_df.c. New function was provided to return PDU antenna
switch pattern.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This commit updates the revision of hal_nordic component
and introduces necessary changes to the IEEE 802.15.4 driver
to match latest nRF IEEE 802.15.4 radio driver API.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Added SAMPLE_MODULE_LOG_LEVEL_DBG as an exception. Define is used
in the log_api test suite.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add panic_mode flag reset to log_core_init(). It allows full logging
reinitialization which is useful for testing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, when no overwrite mode was used and there was no space
no packet was dropped. However, it should be allowed to drop skip
packet that may be added as padding at the end of the buffer.
Extended dropping scheme to drop skip packets in no overwrite mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added early return from mpsc_pbuf_alloc when requested size
exceed the buffer capacity. Previously, in that case buffer
was falling into endless loop.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Check whether the preempt event matches with the head of the
pipeline before aborting the currently active event.
This is required to avoid preemption of events that became
active due to done event and there has been a race in
stopping the preempt ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check whether the preempt event matches with the head of the
pipeline before aborting the currently active event.
This is required to avoid preemption of events that became
active due to done event and there has been a race in
stopping the preempt ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Sync up with missing LLL changes done related to moving the
handling of pipeline handling into LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added arduino gpios, and the typically used aliases for
arduino_spi, arduino serial and arduino_i2c
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Update the tester application to correctly reserve the number of bytes
needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the L2CAP channel send command to correctly reserve the number
of bytes needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the L2CAP OTS implementation to use the correct reserve
defitition. By not using the correct definition the stack always
allocates a new segment for the packet, which puts more stress on the
stack buffers.
Update TX data size to be more intuitive by adding the overhead, instead
of subtracting it. This increases the default MTU of the implementation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add argument to the L2CAP channel send command so that the user can
determine the length of the packet to send, this is useful for testing
various segmentation scenarios.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the documentation for L2CAp Connection oriented channel send
function to include better description of the L2CAP PDUs (Basic frames)
and L2CAP SDUs (Credit-based frames) so that the application can better
understand how to size the buffer pools and setting the RX mtu.
Document stack behavior on RX path and how the application has to
set up the channel in order to receive segmented packets.
Document stack behavior on TX path for reserving either mandatory or
optional header bytes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the L2CAP TX MTU default to fit the public key packet in a single
L2CAP fragment. This matches the configuration for RX buffer lengths
being set with this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
