Update to the latest west. This includes a new 'attach' command. There
are also multi-repo commands, but those won't get exposed to the user
unless they install Zephyr using "west init" + "west fetch" (and not,
say, "git clone").
Replace the launchers; they now detect whether zephyr is part of a
multi-repo installation, and run the west code in its own repository
if that is the case.
This also requires an update to:
- the flash/debug CMakeLists.txt, as the new west package is no longer
executable as a module and must have its main script run by the
interpreter instead.
- the documentation, to reflect a rename and with a hack to fix
the automodule directive in flash-debug.rst for now
Signed-off-by: Marti Bolivar <marti@foundries.io>
Unify method of enabling secure TLS sockets in samples by using TLS
overlay config file instead of standalone config files.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid having not-necessarily board specific configs in a separate file.
Instead, have a single project file with appropriate overlay configs.
Board specific configurations can be added in future if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The address of the device is also set via HCI interface when passive
scanning is used. As a result, LL does not filter out directed
advertising packets that are targeted at this device.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This allows to configure desired parameters for peripheral. When set
PPCP characteristic is also added to GAP service. If disabled it is
up to application to controll connection parameters and stack will
only enforce 5 seconds delay before update.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fixes a few issues with the handling of Connection Parameter
update in the Host:
- starting conn param update timer as master
- ignoring 5 seconds slave timer when calling bt_conn_le_param_update
- starting conn param update timer on every PHY update
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
1. All macros assert have been replaced with __ASSERT_NO_MSG.
2. Macro _Static_assert has been replaced with BUILD_ASSERT.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing assert that was crashing shell in allowed scenario.
For example the Tab button is pressed when command buffer is empty.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
There is an unnamed choice for the BT link layer selection.
Giving the choice a name would allow multiple declarations of the
option and the ability to select out-of-tree LL's.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add ifdef guard to the z_reset_timeslice() to fix compilation
errors when CONFIG_TIMESLICING is disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the selection of MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
in SOC_MPS2_AN3385, as this is selected automatically by
ARM_MPU option (for ARMv7-M MCUs).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the recent change in `struct log_backend_api` (ie: add
of `init` function), init function can be marked as `static`
as it is only used in the scope of the file.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
If this environment variable is missing, the user gets a rather
confusing cmake error message about "STREQUAL" "gccarmemb" from the
lines below.
Adding quotes to the check makes cmake handle it better and instead
report the problem in the later ASSERT.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
The nrf52840_pca10056 defconfig apparently started off as a copy of the
one for nrf52840_pca10040 and one comment was forgotten to be adapted
accordingly.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Adding i2c slave requires overlay with node definitions and
proper aliases depending on driver implementation.
Modified i2c_slave_api test to use information from dts.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Several style and typo fixes in inline comments of arm kernel
files and thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds an inline explanatory comment in the API
for setting the non-secure stack-pointer limit registers, to
stress that the API is only applicable to Mainline ARMv8-M MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes a minor bug by setting the error reason
(to, default, _NANO_ERR_HW_EXCEPTION) for errors detected
during Secure/Non-Secure stack inspection. Applicable only
to Secure firmware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
1. Added API to change shell prompt in runtime.
2. Added prompt buffer length configuration in Kconfig.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
So far the stack hasn't provided any way for the application to access
the existing bonds. This patch adds such an API.
Fixes#10122
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix merge error introduced in:
ba01a3952f
(as part of #9362)
which deleted the native_posix backend for the logger.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This uses net_buf_append_bytes to reassemble the SDU segments instead of
doing it manually.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the remote stack is not able to fully utilize each segment it is
possible it would run out of credits before completing the SDU, these
changes detects if that would happen and attempt to restore enough
credits for the SDU to be received.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This simplify the logic of restoring the credits after each SDU instead
of using an arbitrary threshold which was not configurable per channel.
Because the credits are restored only when the full SDU has been
reassembled it means the channels needs to be set up with enough for
the configured MTU otherwise there is a risk of the channel to run out
of RX credits before the packet is fully reassembled, because of such
corner case the code will now warn if a channel is setup with not enough
init_credits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When activating SystemView internal kernel header files will be
included. This causes a name conflict with smp_init in smp.c
and smp_init in kernel_internal.h
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The periphreal_sc_only sample app wasn't very clearly logging
information about pairing failures and could give the false
impression that everything work when it doesn't. Enable some more
logging Kconfig features and take advantage of the pairing complete &
failed callbacks to give more information to the user.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixed case when shell_log_backend.c was included even though
shell was disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds support of the SAMD21 XPlained board. The board has a
similar pinout to the SAMD20 XPlained with a different pin-mapping.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Fix compilation of sam0 serial driver on sam21dj18a by converting _U()
to __U() and _L() to __L() in sam21dj18a.h.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
This fix ensures that the handle range used for next GATT discovery is
always inclusive. Previously, the discovery procedure could not be
started with equal value of start and end handle.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This sample is made to demonstrate use of shield x-nucleo-ik01a1.
It will display embedded sensor data endlessly.
It requires a board with Arduino i2c as minimum configuration
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In dts.cmake, build shield list. For each shield, check if
associate KCONFIG is enabled and if it is, add matching files
to following new cmake variables:
-DTC_SHIELD_OVERLAY_FILE
-DTC_SHIELD_FIXUP
Then, consume these variables when needed.
Shield overlay is conceived as the very first overlay applied
to the board dts. It intends to build a new board that should
then behave as any other board versus common or user's overlay.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added cy8ckit_062_wifi_bt_m4 board configuration to build FW for CM4
core.
CM4 core does not start itself, it have to be started by CM0+ FW.
Signed-off-by: Nazar Chornenkyy <nazar.chornenkyy@cypress.com>
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
Added basic PSoC6 UART driver and added two UART nodes in the PSoC6
device tree to have output from CM0+ and CM4 cores.
Signed-off-by: Nazar Chornenkyy <nazar.chornenkyy@cypress.com>
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
