HCI_LE_Set_Connection_CTE_Receive_Parameters handling is required to
enable sampling of Constant Tone Extension in connected mode.
The commit adds handling for HCI_LE_Set_Connection_CTE_Receive_-
-Parameters command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add struct ll_df_conn_rx_params sturcutre to struct ll_conn.
This is storage for parametrers required to configure radio
for CTE reception in connected mode.
Add required includes to make the controller code compilable
after change struct ll_conn.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new strcture type for storage of CTE receive parameters.
The structure will be used in to store parameters for connected mode.
The parameters provided by HCI commands for receiving CTE
in connected mode and disconnected mode are a bit different.
There is common subset of parameters but extraction of those
into common structure would increase of size of other stuctures
that aggregate them.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Code related with connected mode was in middle between connectionless
RX and TX. Moved to the bottom of the file.
Added missing compilation guards for ll_df_set_conn_cte_tx_params.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add features: connection CTE request, connection CTE response
and receiving constant tone extensions; to HCI and features
supported by controller.
The features are not enabled yet.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Compute the SHA256 hash of the downloaded image and compare that with
the hash in the deploymentBase to guarantee that only the correctly
downloaded image will be flashed.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Use a semaphore to prevent the hawkbit_probe from running more than once
at the same time since it reset the hawkbit context on entry and will
affect other running instance.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix multiple typos and make the sample's log output consistent
with the subsys.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Co-Authored-By: Sylvio Alves <sylviojalves@gmail.com>
The delay will ensure last byte has been latched in before
This also change the method of reading status register from re-send
read status command on each read to read status register continuously.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When there is no grove sensor driver enabled, cmake warns
that the library has no sources. Fix that by adding
a new kconfig to be used by CMake to selectively
include the grove directory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When there is no sensor driver enabled, cmake warns that
the library has no sources. Fix that by wrapping cmake
library instructions inside kconfig.
Fixes#37765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When there is no console driver enabled, cmake warns that
the library has no sources. So only include the console
directory when CONFIG_CONSOLE is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
log and libc optimization default config are soc related
and should be moved out from board context.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add workaround for no command buffer available when the host is
transmitting Host Number of Completed Packet Commands.
This command does not follow normal flow control of HCI commands and
the controller side HCI drivers that allocates HCI command buffers with
K_NO_WAIT can end up running out of command buffers.
Increase the command buffer count from 2 to 10 for the HCI uart driver
until the issue has a proper fix
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This reverts commit 7b09d031fa. Because
context save of GP register is removed, we don't need to initialize GP
at thread init. GP will be a constant value so that it could only be
initialized at program start.
Signed-off-by: Jim Shu <cwshu@andestech.com>
RISC-V global pointer (GP) register is neither caller nor callee
register, and it's a constant value in the single ELF file. Thus, we
don't need to save/restore GP at ISR enter/exit. Remove it to optimize
context switch performance.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In commit 00f95032938e1387126f453b64f8c479987ca16e to make
k_current_get() work without syscall, a new z_current_get()
was introduced since there are times when thread local
storage has not been initialized. However, this was not
marked with const attribute the same as k_current_get().
This may result in slower compiled code as each call to
z_current_get() may actually need to go through the whole
function call process instead of reusing the result from
previous call in the same scope. So add const attribute
to z_current_get() to restore the old behavior.
Fixes#37460
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Document the change in behaviour for `lora_send` and how to get back
the original behaviour.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Detect failed transmissions using `lora_send` by only waiting for some
multiple of the actual on-air time before giving up.
We use this instead of the inbuilt TxTimeout functionality because the
value of this timeout is set by `lora_configure`, and therefore doesn't
change with different packet lengths. This is a limitation of the
underlying `RadioSend` function, not the Zephyr driver.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Change the behaviour of `lora_send` to block until the transmission
completes. The current asynchronous behaviour is exposed through the
new function `lora_send_async`. This naming convention brings LoRa in
line with other asynchronous subsystems.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
1. Do not throw an error when FSL_FEATURE_USDHC_HAS_HS400_MODE
is defined
2. Add support for the case when the card detect is handled
by the USDHC module
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The commit applies changes that are required by update of ELM Chan's
FAT FS driver update to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit updates revision of the Zephyr for of ELM Chan FAT FS
driver to the revision that updates source code to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing EGU nodes. We already have a compatible for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing EGU and TIMER nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing FICR, UICR, RADIO, and EGU nodes. We already have
compatibles for these defined, and the peripherals are present, so
define them for consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
