Remove useless operands since 'bit' field of npcx_clk_cfg structure is
only 3-bit depth and always under 8.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL prevents changing data content in the write function of host
interface by declaring it as constant pointer.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Verify the result of option encoding while forming Deregister message
instead of silently ignoring it.
Coverity ID: 215373
Fixes#33096
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In function wwdg_stm32_init, return value of clock_control_on
was not checked.
This is reported as an issue by coverity (CID 219600).
Fix this.
Fixes#33067
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In function gpio_stm32_enable_int, retiurn value of clock_control_on
was not checked.
This is reported as an issue by coverity (CID 219652).
Fix this.
Fixes#33035
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
RX/TX buffer depth are configurable parameters of DW_apb_i2c.
Change code from using fixed value I2C_DW_FIFO_DEPTH to using
register ic_comp_param_1 for RX/TX buffer depth.
Signed-off-by: Satoshi Ikawa <ikawa.satoshi@socionext.com>
Fix#32774
Bit position BIT(7) is 1000 0000 in binary which is actually the
bit positon 128. BIT(7) can be used as a mask, but we need to define
the position specifically as the integer 7.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Commits affecting Zephyr that are included with the new revision:
99f9fd6 img_mgmt: Use IMG_MGMT_BOOT_CURR_SLOT as current running
slot ID (enhancement)
6f52fd9 zephyr: fix initialization of file struct (bug fix)
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The commit fixes coverity issue where return status bank erase operation
has not been checked prior to proceeding with tests.
Fixes: #32924, Coverity-CID: 219522
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If CONFIG_LOG_IMMEDIATE=n, go to panic mode with LOG_PANIC() so full
coredump is logged.
Add missing log_strdup() call.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Remove duplicates from ZEPHYR_MODULE_NAMES only if that list
exists. That avoids cmake error "list sub-command REMOVE_DUPLICATES
requires list to be present" if ZEPHYR_MODULE_NAMES is empty.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Improve the test case of CPU exception.
Add equivalence classes and input partition testing
when give an integer reason code.
Signed-off-by: Ying ming <mingx.ying@intel.com>
For z_early_boot_rand_get(), give a length less than uint32 to be input
value, ensure the API can work normally with error condition to improve
code coverage.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
The line break inside the :zephyr_file: directive causes a space
to be inserted into the link to the file, which means the link
does not work.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
Calculate Initial Sequence Number (ISN) as described in RFC 6528
https://tools.ietf.org/html/rfc6528
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove SPI_[0-8] and SPI_[0-8]_OP_MODES Kconfig symbols as no driver
uses them anymore. We also cleanup board and sample code to remove
use of these symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are several issues with the current implemenation of the
{inc,dec}_nest_counter macros.
The first problem is that it's internally using a call to a misplaced
function called z_arm64_curr_cpu() (for some unknown reason hosted in
irq_manage.c) that could potentially clobber the caller-saved registers
without any notice to the user of the macro.
The second problem is that being a macro the clobbered registers should
be specified at the calling site, this is not possible given the current
implementation.
To fix these issues and make the call quicker, this patch rewrites the
code in assembly leveraging the availability of the _curr_cpu array. It
now clobbers only two registers passed from the calling site.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
k_work_pending is now called k_work_is_pending.
These two uses are correct assuming the functions that invoke them are
not involved in race conditions: that the work is not pending is an
allowed condition for modifying state that will be used by the work
handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some boards prefers immediate mode (native_posix) but this sample is
intended to use deferred mode. Add explicit setting.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
To keep the generic DMA device name as defined
in the dma framework config, renamed paxdma device
label to "DMA_1".
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Previously, a racing write to the provided string could result
in up to CONFIG_THREAD_MAX_NAME_LEN-2 bytes after the end
of user-accessible memory being leaked into the thread name.
For now, make a temporary copy. In an ideal world this could
copy directly from userspace into the thread name, but that
violates the current vrfy / impl split.
Signed-off-by: James Harris <james.harris@intel.com>
Putting IPC elements on the stack isn't allowed when KERNEL_COHERENCE
is set, just make test case data static (not all apps or subsystems
are going to work with incoherent stacks, but we should support it
where we can).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This platform has a tiny handful of remaining tests that fail. We
will track them as issues, but let's exclude them from integration
testing to allow full runs to complete. Often a hung device in one
test will break an entire twister run.
Tests with known (and tracked) failures:
samples/application_development/external_lib
samples/posix/eventfd
samples/userspace/hello_world_user
tests/kernel/fatal/message_capture
tests/net/socket/socketpair
tests/portability/cmsis_rtos_v2
These tests never fail in isolated testing, but are reliable timeouts
when run in sequence in a big twister run. It's possible that the bug
here may be in twister or the flash/serial scripts:
tests/crypto/tinycrypt
tests/subsys/logging/log_immediate
tests/subsys/logging/log_output
See: #32836
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CONFIG_KERNEL_COHERENCE forbids synchronized data on the stack: no
spinlocks, IPC primitives, or things that contain them. Application
code obviously doesn't have to follow these inconvenient rules, but
our test code needs to run on platforms with incoherent stack memory.
Make these things static.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Turns out that the user can configure the "zephyr.elf" name via
kconfig to be "something_else.elf" instead. And there's a test the
does this. Use the right variable; don't hardcode.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was added early when we had (somewhat oddly) a log subsystem
backend but not a printk char_out hook. Now we have one backend that
works with both. No need, and this fixes build errors with a handful
of tests that specify LOG_MINIMAL (LOG_PRINTK requires the full log
subsystem and doesn't work with MINIMAL).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This platform has a newlib which is inexplicably missing a
_gettimeofday_r symbol. Just filter the test there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In commit efa05d1e42da ("soc/intel_adsp: Put initial stack into the
CPU0 interrupt stack") the "_end" symbol was accidentally removed from
the linker script. Newlib needs this to size its heap.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Many platforms don't have a console backend, and this fails with a
kconfig warning if you try to build on them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
All users of ATMEL_SAM0_DT_INST_DMA_NAME are now using
ATMEL_SAM0_DT_INST_DMA_CTLR so we can remove the macro.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a macro similar to ATMEL_SAM0_DT_INST_DMA_NAME but instead
provides the devicetree node back via DT_INST_DMAS_CTLR_BY_NAME
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
