temporary_table is a trivial copy of virtual_memory_regions, it isn't
clear why it's needed. All the more that it's freely mixed with
virtual_memory_regions itself. Also change a variable name to avoid
confusion and improve indentation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
update espi_vwire_signal enum to refer all platform specific
usage virtual wires to ESPI_VWIRE_SIGNAL_SLV_GPIO_x
Virtual wires used for USB-C port over current (OCB)
have been defined as macros mapped to the corresponding
espi_vwire_signal enum
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Change device tree VW routing to a form allowing overrides.
Add two new DT optional properties for specifying the reset
source and reset value of each virtual wire. Only virtual
wires that are enabled using the status property are modified.
NOTE: eSPI virtual wires are controlled in groups of 4 by
hardware. The optional reset signal source properties applies
to all four virtual wires in the group. If this field is
changed from the hardware default, it should be changed for
only one virtual wire in the group. If the property exists
in more than one wire in the group it must be set to the
same value.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Modify Mircrochip MEC172x eSPI driver to get eSPI virtual wire
hardware routing from device tree.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
The clock control driver requires three pieces of information:
PCR register index, bit position, and clock domain. Clock domain
was missing from DT information and MCHP macros.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Deleted adc_mchp_xec.c and microchip,xec-adc.yaml file.
DTSI, yaml, CMakeLists.txt and Kconfig.xec files are
updated for compatible.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Updated the "adc_mchp_xec_v2.c" adc driver to support both MEC172x and
MEC15xx SOC.
ADC smapling clock configuration updated using DTS.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Revert the locally fixed issues for the zephyr 3.3.0 release and
replace them with the official fixes submitted upstream.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add check to the Remote Provisioning Client model init call
that verifies that the model is located at the root element.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Change the documentation @defgroup tag for RPR client,
as it does not align with other parts of the RPR implementation.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Start using zephyr power management in cavs platform in a similar way
that is already done in ace. This commit only addresses the power off/on
sequence. Runtime power management is not implemented.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Fixes the lsm9ds0_gyro sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lsm6dso sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lsm6dsl sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lps22hh sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis3mdl sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2mdl sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2dw12 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2ds12 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2dh sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the ite_vcmp_it8xxx2 sensor driver to store the user-supplied
sensor trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the ism330dhcx sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the isl29035 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the ina23x sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the iis3dhhc sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Since we have a dedicated function for UDC_EVT_EP_REQUEST type
events, we can now simplify udc_submit_event() and remove
buf parameter.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This allows us to get the result of synchronous transfer without
any hacks, just from the net_buf structure.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not use UDC_EVT_EP_REQUEST event without a valid pointer
to a request buffer. No changes needed in the upper layer because
it requires valid buffer pointer for this type of event anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add helper function to send UDC endpoint event to a higher level
that takes fewer arguments.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add note highlighting change to LPADC channel selection setup, so that
users will be aware they need to change their devicetree configuration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Treat sample data as signed when using differential mode for ADC
sampling, so that negative differential samples will be converted
correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update board overlays for boards with LPADC IP present on their SOCs, to
use new LPADC API for channel numbering.
For the RT595 and LPCxpresso55S69 EVKs, additional channels are enabled
to demonstrate the resolution and differential channel features of
the LPADC.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update test/drivers/adc/adc_api to support the new channel configuration
method used by the LPADC driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Rewrite MCUX LPADC driver, to better utilize hardware.
the following changes have been applied:
- channel numbers now correspond to hardware channel command slots,
use "input_positive" and "input_negative" fields along with channel
definitions in dt-bindings/adc/mcux-lpadc.h to select a channel
- the number of channel command slots available is configurable via
CONFIG_LPADC_CHANNEL_COUNT
- Side A and side B channels are now supported
- differential channel mode is now supported
- ADC channels now are sampled via hardware, without additional
software triggering
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The ISO hci_le_cis_req event handler was missing
calls to bt_conn_unref and bt_iso_cleanup_acl to properly
clearn up the reference counters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added missing bt_conn_unref where bt_conn_lookup_handle is
called, but where the function returns without providing the
conn pointer to the caller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When we supply the conn pointer of the remote device that
provides the PAST information, we do a lookup on the
conn_handle using bt_conn_lookup_handle which takes a
reference count. This count is never dereferenced again.
This commit adds calls to bt_conn_unref to ensure that we
do not keep the reference count after the function
returns.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In 6e21ebf the sampling interval was changed, which caused the
issue #56070. This is fixed by allowing different boards to
specify a sampling period.
Also changed the test_task_with_interval to verify that
the supplied interval was used.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Add a board overlay for sam4s_xplained. Channel 5 (PB1) is enabled as
well as the internal temperature sensor.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Enable ADC entry in device tree and pinctrl (PB0/PB1).
Update doc/yaml files to include ADC info.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
