Change the handling of iface parameter in net_if_ipv6_maddr_lookup()
function:
* If the *iface is set to NULL, then return the found
interface to the caller.
* If the *iface is not NULL, then use that interface
when doing the lookup.
Change-Id: Ia1f0365170ea9f3e615d189231160614a80d241a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of the change in next commit "net: if: Change
the iface param in net_if_ipv6_maddr_lookup",
we must initialize the network interface to NULL.
Without this the multicast address lookup will fail.
Change-Id: I113b44ce23c5f2ecbbf1698972078f102995e891
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the IP address parameter const because we are not
modifying the IP address in net_if_ipv6_maddr_add() or
net_if_ipv6_maddr_rm()
Change-Id: I98c19de132e58c386f661e8a76a349d562a82c71
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the function does not change the original data, make
the corresponding parameter const.
Change-Id: I1125a2f9205dc73de2f0aac0c30110591baace1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the dma block transfer sample app to use the new
dma api interfaces. This change is based on the api change
and the updated dma driver.
A RFC was posted recently on this.
Jira: ZEP-873
Change-Id: Icf3bec7260c2e499485b07a4a579956448a1a3fd
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Update the qmsi dma shim driver based on the new dma api
interface.
Recently, a RFC was posted to update the dma api. The update
to dma api interface was already posted. This change is to
update the dma qmsi shim driver based on the dma api change.
It is using the new data structures and new api function names.
Jira: ZEP-873
Change-Id: If9a772c5ff1c2b10fca05172c48f75223bbf940e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Update the dma API.
Recently, a RFC was posted and reviewed to update the dma
API. This change is to update the APIs. The change can be
summarized as follows,
1. Compress config data structure to reduce memory usage.
2. Add missing configuration parameters.
All the existing data structures and APIs will be
deprecated and replaced by new ones.
Jira: ZEP-873
Change-Id: I412935fce7a2db9d69b2ef700a995af07fa60e33
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Poll events were getting registered even when polling conditions had
already been met, but events with conditions met did not register and
did not increment the number of events registered. This caused a
possible discrepancy between the number of events registered and the
position of the last event registered in the events array.
As soon as one event condition is met, the next ones in the array should
not get registered even if their condition is not met. This is what the
code does now.
Change-Id: Ibcc3b135ec9d3cf463beb9da3f641fec962b34bf
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Gerrit patch https://gerrit.zephyrproject.org/r/#/c/10849/
created a doxygen folder that make clean should remove
Change-Id: I5cd4dea489c868eef4f101c20cced3280b7abc39
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
gerrit patch https://gerrit.zephyrproject.org/r/#/c/10849/
changed where doxygen xml data is generated. Git should
ignore this directory.
Change-Id: I7f9aa9246e6453deb74ecb71b5e786253fba9d0a
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Depending on the version of Python 3 the user has installed, 'open'
may default to using 'ascii' encoding. Since the documentation is in
UTF-8, and contains characters beyond 'ascii', this will result in
failures when using these versions of Python.
Fix this by being explicit about the encoding to be used when reading
these files.
Signed-off-by: David Brown <david.brown@linaro.org>
Change-Id: I54c69334c6bf377f1135cec04f4e0ea96a8e9a5b
Without this patch, the final linker script had a memory region defined
as:
RAM (wx) : ORIGIN = 0xA8006400, LENGTH = 55*1K - 0x20 +0x4
resulting on the wrong RAM length. Fix BSP_SHARED_RAM_SIZE definition
so the sum is always processed first.
Change-Id: I16b93adbaf27bb84b6e5d1ac433ef80f854b218c
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Implement RFC2131 4.1.1 requirement that at dhcp implementation wait
for a random delay of 1 to 10s before sending the initial DISCOVER.
Implement RF2131 4.1 requirement that at dhcp implementation set the
initial retransmit timeout at 4 seconds and exponentially backoff on
each retransmit.
Change-Id: Id7029f3ed16a5f886dbd555fed87320aeffe31aa
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Rather than reuse XID's on retransmissions, always use a unique XID.
Either behaviour is permitted by rfc2131. Debugging the dhcp client
in the presence of multiple dhcp servers with significant packet loss
in the network is much easier if we don't unnecessarily reuse request
identifiers.
Change-Id: I5c82cbdbf3dfc0ef88cae036aa863946844c144f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Turn down the default logging verbosity on the dhcpv4 frdm_k64f config
to focus on the dhcpv4 implementation.
Change-Id: Ifb450181add653951517a7b128b11657ec2bab62
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The example entropy_source implementation should write entropy to the
output buffer rather than to the context pointer which in this example
happens to be NULL.
Take the opportunity to reorganize the entropy_source to use all of
the entropy provided by a call to sys_rand32_get() rather than just
1/4 of it.
The entropy_source() callback from mbedtls is given a maximum amount
of entropy to return, rather than a minimum amount. Hence it makes
more sense to deliver exactly one chunk (32 bits) of entropy from the
call to sys_rand32_get() per call and let the mbedtls entropy handler
worry about how much entropy we actually need to collect (ie the threshold).
Change-Id: I57ed438de5cb1223619fde0fb8039d6eca284646
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I98fabdcadfd0a4fe5ae10226dabf4e6d31e88df6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I9c303ef949f7670f2a2d9691c342e496873e96e6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Core stack is not removing the network buffer if app data length
is zero. So memory leak happening here.
Change-Id: I3d354b5e7008396ca7cb977631036871998165b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ieaa0978aa69e2f0baa924fe842ca1f116c348ef1
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ib8e3f8b412c2f8388315c2f63cae4392f814ea2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is required to allow an "IP Offload" driver to build,
once CONFIG_NET_L2_OFFLOAD_IP is enabled.
This fixes the offload_ip.h header following the change made by
commit eb9055c019
("net: tcp: move accept_cb from net_context to net_tcp")
Change-Id: I1a6010c2dbdfc5e74a2ae172aa0167783f4a0cfe
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
finalize_segment() will call net_ipv4_finalize() or
net_ipv6_finalize(). Both the functions perform net_nbuf_compact().
But after finalize_segment(), net_nbuf_compact() called again, which
is unnecessary.
Change-Id: I9fab63bcc44eec87061a4b55edd5053cf6556a75
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Protocol family is checked in prepare_segment() and in same function
it's again verified by finalize_segment(). So remove the double checking
in finalize_segment().
Change-Id: I17123ab8741d017d7e3ff1ef3fb07371b0d4aa66
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_ref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Iac81bd3ab95547741d49f32763baaa54e97b4877
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Panther is a board based on Quark SE C1000 SoC.
Change-Id: I66653c40efcb7e04748a21ea622debee23d7d6c0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enabling the riscv_machine_timer driver by default for riscv32
causes compilation issues on riscv32 boards (like zedboard_pulpino)
not supporting it.
Boards supporting the driver enable it via their respective
config file.
Change-Id: Ieb0d25fa339834fd386ae2725f40b6b7b72dc52b
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Arch-specific stuff shouldn't be in the toplevel Makefile,
forthcoming patches will soon introduce special interrupt
handling logic for other arches.
Change-Id: Ib5a86cbdf5b32ecfce9e5e234f7cbea2bc3ce9c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some stuff that was platform-specific is made common, and some repeated
code was made a macro. __in_section() is used elsewhere in the codebase
and its 2nd and 3rd arguments are not necessarily filename/counter.
GCC-specific stuff moved to the toolchain header.
Change-Id: Ibfae919b6dd8a77210801c14e9a1128b43bd63f6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is one the series patches that simplifies the driver code by
using the IS_ENABLED macro. This removes the need of the const
variable and the wrapper functions on semaphore APIs.
Jira: ZEP-1251
Change-Id: Ic2df5d04966d2a066478ca3e119f76d24fc4dfb3
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This is one of the series of patches that simplifies the driver
code by using the IS_ENABLED macro. This removes the need of the
const variable and the wrapper functions on semaphore APIs.
Jira: ZEP-1251
Change-Id: I84a09a0aaa3a00452d8c2b4bca7be0f6b2015218
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This is one the series patches that simplifies the driver code by
using the IS_ENABLED macro. This removes the need of the const
variable and the wrapper functions on semaphore APIs.
Jira: ZEP-1251
Change-Id: I59802cf9f482337656b0fdc4b272f3b1ddc6cbda
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This private data structure now no longer introduces a typedef or
uses CamelCase. It's not necessary to specify the size of extern
arrays, so we don't need a block of #ifdefs for every arch.
Change-Id: I71fe61822ecef29820280a43d5ac2822a61f7082
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit removes the local implementation of enter_arc_state, where
the ARC is instructed to sleep, using instead the QMSI 1.4 functions.
Change-Id: Id489ad53851be50fc5e50add698891fcfaef3abe
Signed-off-by: Juan Solano <juanx.solano.menacho@intel.com>
This commit removes the aonpt interrupt masking/unmasking needed after
wake up as that functionality is now available in QMSI 1.4. The QMSI
save/restore functions are called instead.
Change-Id: I61a4a6952e959d0834904bbc8e1eb98092ae4b1c
Signed-off-by: Juan Solano <juanx.solano.menacho@intel.com>
This commit removes the RTC interrupt masking/unmasking needed after
wake up as that functionality is now available in QMSI 1.4. The QMSI
save/restore functions are called instead.
Change-Id: I15b5063fa64c71b125edd2c709410b5ae655032e
Signed-off-by: Juan Solano <juanx.solano.menacho@intel.com>
Several GPIO device drivers support only one of the two possible
access_op modes and return an errno error code for the mode they do
not support. Use the same errno code across all drivers.
Change-Id: Ic01ce9dee7fb2405d254c60cebee22053c803270
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
