The ARM Cryptocell 310/312 IP is wrapped by Nordic specific registers.
It is organized as follows:
- Base address: Nordic wrapper
- Base address + 0x1000: ARM Cryptocell IP registers
Following more standard devicetree conventions, use a single node for
what is exposed as a single peripheral. The node contains 2 register
entries, one for the wrapper and a second one for the 3rd party IP.
Compatibles are used from more specific (nordic,cryptocell) to more
generic (arm,cryptocell-3xx).
Other minor fixes: peripheral is disabled by default (as it should be in
SoC dts files).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Skips are turned to errors on integration platforms. However, if
a user (or a CI) selects toolchain other than zephyr, unexpected
errors due to skips can appear. With this commit skips due to
toolchain incompatibilities are not treated as errors.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Sphinx will now issue a warning when a code-sample role points to a
sample that does not exist.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The MQTT-SN publisher sample is referred to as mqtt-sn-publisher, not
mqtt-sn-publisher-sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added ability to read contents of TMP116 configuration register by adding
an attribute get function that supports the SENSOR_ATTR_CONFIGURATION
option. Followed the same approach as the TMP108 driver. Interpretation of
the returned value is left up to the caller.
Tested using Nucleo-F401RE and Temp-Log 2 (TMP116) click board and
confirmed a read of the configuration register returned the expected
value.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Documentation for `bt_gatt_subscribe_params` and
`bt_gatt_discover_params` is not complete.
`CONFIG_BT_GATT_AUTO_DISCOVER_CCC` need to be selected so Doxygen add
see `end_handle`, `disc_params` and `sub_params`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
BBRAM can now depend on the new RTC driver implementation instead of the
old counter based one. This adds the corresponding test scenario.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
The Cat.1 STM32L1 MCUs do not provide the subsecond feature. This disable
subsecond related code for these MCUs.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
STM32 BBRAM depends on RTC to work. This changes STM32 RTC init stage to
PRE_KERNEL_1 to allow RTC driver to initialize before BBRAM driver.
Some adjustments are made so that kernel API is not used during the init
procedure.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Run 16-bit frames tests also when DMA is enabled. In addition,
remove the extra code required for the mentioned tests in
favor of config. files, and add test cases for nocache regions
defined in devicetree.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Modify STM32H7 SPI driver so that it updates the rx/tx
pointers correctly (depending on the frame size) when DMA
is enabled. Also, make the dummy rx/tx buffer cache-coherent.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
The way of setting a nocache region in devicetree has changed.
Adapt the H7 SPI driver to this new circumstance.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
This commit fixes an issue with the nrfx uarte driver to allow the
async and interrupt driven UART APIs to coexist on different uart
instances. As both APIs cannot be used simultaneously for a given
instance, there is no need to handle
CONFIG_UART_EXCLUSIVE_API_CALLBACKS in this driver.
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
There was a new Kconfig for USB-C init priority that is conflicting
with currently used Kconfig for init of VBUS and TCPC.
This commit changes the names to more specific related to the subsystem
they belong to.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The DT_INST_CLOCKS_CELL macro takes as the first argument the device
instance and not the cell index. This change correctly gets the second
index of the first device as intended.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Drivers for nRF SoCs using pinctrl did not select PINCTRL. This means
boards are forced to enable PINCTRL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove unused code in `host/gatt/settings` test. The conditional block
could never be reached because the type of the discovery parameter is
`BT_GATT_DISCOVER_CHARACTERISTIC`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Also set the HAL variant appropriately when building for
the new nrf53_bsim boards.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Just like for the nrf52_bsim let's add helper kconfig symbols
which can be used to identify we are running in a target that
is compatible with the real HW but is not the real HW.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit adds unit tests for the SO_REUSEPORT sockets option. It also
fixes some bugs in other tests triggered by the new features.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commits adds support for the SO_REUSEPORT socket option.
The implementation follows the behavior of BSD and tries to also follow
the specific additional features of linux with the following
limitations:
* SO_REUSEADDR and SO_REUSEPORT are not "the same" for client sockets,
as we do not have a trivial way so identify a socket as "client"
during binding. To get the Linux behavior, one has to use SO_REUSEPORT
with Zephyr
* No prevention of "port hijacking"
* No support for the load balancing stuff for incoming
packets/connections
There is also a new Kconfig option to control this feature, which is
enabled by default if TCP or UDP is enabled.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds unit tests for the SO_REUSEADDR socket option to test
the different possible scenarios for the option to work correctly.
There is also a fix for the TCP testsuite to make a now failing test
pass again due to a TIME_WAIT socket.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds support for the SO_REUSEADDR option to be enabled for
a socket using setsockopt(). With this option, it is possible to bind
multiple sockets to the same local IP address / port combination, when
one of the IP address is unspecified (ANY_ADDR).
The implementation strictly follows the BSD implementation and tries to
follow the Linux implementation as close as possible. However, there is
one limitation: for client sockets, the Linux implementation of
SO_REUSEADDR behaves exactly like the one for SO_REUSEPORT and enables
multiple sockets to have exactly the same specific IP address / port
combination. This behavior is not possible with this implementation, as
there is no trivial way to identify a socket to be a client socket
during the bind() call. For this behavior, one has to use the
SO_REUSEPORT option in Zephyr.
There is also a new Kconfig to control this feature similar to other
socket options: CONFIG_NET_CONTEXT_REUSEADDR. This option is enabled by
default if TCP or UDP are enabled. However, it can still be disabled
explicitly.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
If coverage is provided by a different platform not in the integration
list, it should not be reported as error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This platform (SOC_SERIES_EFM32PG1B) is also using SOC_GECKO_SERIES1 and
needs a pinctrl device defined to build the gecko-uart driver
successfully.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Some SDK power macros are no longer available in the header
file. Add local defines in Zephyr.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The SDK function ENET_SetCallback is deprecated and has
been removed in the latest SDK.
Update the driver to set the callback during Init by using
the callback config param.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Adds saving of the last lv_indev_data_t for button and pointer type
devices. This is needed because there is currently no way to tell LVGL in
the read callback that no event is pending. Preservation of the last state
is expected to happen in the port layer for the input devices.
This resolves issue #62512.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Log modules should be registered with LOG_MODULE_REGISTER
rather than LOG_MODULE_DECLARE. It seems the latter works
on most platforms (at least with in minimal mode as configured
with ZTest).
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
bsearch() tries to find the exact match for the key, otherwise it
returns NULL. However, here we want to find two elements our key lies
in-between. This requires some rather complicated logic that pretends
it found the exact match even if it didn't. Replace this with a simple
implementation of binary search.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
The value of n_comp is wrong for ntc-thermistor-generic. Introduce a
helper macro to compute n_comp correctly for both thermistor types.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
The pullup resistance was assumed to be the maximum ADC value. This is
incorrect when the reference ADC voltage and the thermistor pullup
voltage differ. Use the pullup_uv property from DT instead.
The equations for the thermistor resistance are also wrong. The correct
equations are (see https://en.wikipedia.org/wiki/Voltage_divider):
R1 = R2 * (Vin / Vout - 1)
for the positive-connected resistor, and
R2 = R1 * (Vin / Vout - 1)^-1
for the negative-connected resistor. These were transformed so that
they can be computed using integer math.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
