This reverts commit 9987c2e2f9
which spills SoC configs into architecture files and is not
exactly desirable. So revert it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 9987c2e2f9 spills SoC configs
into architecture files which is less desirable. This provides
the jump address for bootloader, and modifies the bootloader to
jump to __start defined in reset-vector.S. This prepares for
that commit to be reverted.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both memctl_default.S and memerror-vector.S (inside
arch/xtensa/core/startup) refer to XCHAL_CACHE_MEMCTL_DEFAULT which
is not defined anywhere. The linker script for intel_apl_adsp SoC
provides default values, but not the bootloader linker script. So
provide the same default value in the bootloader linker script as
in the SoC linker script.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Even though it looks logical to not expose BUILD_NO_GAP_FILL
when we don't expect to use objcopy for creation of .bin, .hex etc
in reality generation of at least zephyr.hex happens if one wants
to use openocd runner, see CMakeLists.txt:
---------------------------->8----------------------
if(CONFIG_BUILD_OUTPUT_HEX OR BOARD_FLASH_RUNNER STREQUAL openocd)
set(out_hex_cmd "")
set(out_hex_byprod "")
set(out_hex_sections_remove
.comment
COMMON
.eh_frame
)
bintools_objcopy(
RESULT_CMD_LIST out_hex_cmd
RESULT_BYPROD_LIST out_hex_byprod
STRIP_ALL
GAP_FILL ${GAP_FILL}
TARGET_OUTPUT "ihex"
SECTION_REMOVE ${out_hex_sections_remove}
FILE_INPUT ${KERNEL_ELF_NAME}
FILE_OUTPUT ${KERNEL_HEX_NAME}
)
list(APPEND
post_build_commands
${out_hex_cmd}
)
list(APPEND
post_build_byproducts
${KERNEL_HEX_NAME}
${out_hex_byprod}
)
endif()
---------------------------->8----------------------
So if there's a good reason to disable gap filling
(like funny memory map wit huuuuge holes) let's keep that opportunity
instead of relying on sanity of all the other code.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
All SoCs must now 'select' one of the CONFIG_<arch> symbols. Add an
ARCH_IS_SET helper symbol that's selected by the arch symbols and
checked in CMake, printing a warning otherwise.
Might save people some time until they're used to the new scheme.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We only need pyserial python module if we are doing device testing.
Treat it similar to how we treat tabulate module.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Remove usb_descriptor.h as tracing_backend_usb.c doesn't have access
to that include file.
2. Make TRACING_BACKEND_USB depend on USB being enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This github workflow will build the html docs on a pull request or push.
This is similar to the current ci-tools 'Documentation' check. One
difference is this version produces a GH artifact of the html docs
instead of posting it to S3. The artifact is a tarball that is than
zip'd (not gzip).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- added CONFIG_X86_64 since ACRN hypervisor supports x86_64 capable
platforms only.
- removed CONFIG_SET_GDT: Zephyr doesn't support it in x86_64, and ACRN
doesn't require the guests to setup GDT during boot time.
- added CONFIG_X2APIC, which is preferred by ACRN, which makes it
possible to pass through local APIC to the guests.
Signed-off-by: Zide Chen <zide.chen@intel.com>
The loramac-node library uses math functions from math.h that
are not included in the minimal lib.
This commit changes the samples project config to always build
with newlib and adds a dependency to newlib.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If CONFIG_BT_CTLR_CONN_RSSI is enabled, then lll_conn.h should
be included as well. Otherwise, struct lll_conn is unknown
at the compile unit level. This has been reproduced by
compiling the hci_uart sample, where the following error occurs:
lll_adv.c: In function 'isr_rx_pdu':
lll_adv.c:722:13: error: dereferencing pointer to incomplete
type 'struct lll_conn'
lll->conn->rssi_latest = radio_rssi_get();
^~
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
CUSTOM_SECTION_ALIGN is already defined within an 'if ARM_MPU', so it
does not need a 'depends on ARM_MPU'.
Flagged by https://github.com/zephyrproject-rtos/ci-tools/pull/128.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
VEGABoard BLE controller implementation supports HCI over UART;
as such enable this configuration when building the hci_uart
sample.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Do not build tracing system if provided otherwise, for example right now
systemview does not need any of the zephyr interfaces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move rtt configuration options to drivers/debug and split the
systemview configuration.
drivers/debug will service for this class of drivers that are enabled in
debug mode only and provide a hardware interface to the system.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tracing subsystem is growing and although related to debugging, it does
deserve to belong into its own subsystem.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The SDK has a new path for x86 gcov, point to the new binary. Also, do
not clean artifacts when running coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Modifying west.yml to point to the TI HAL repo updated with the RF
driver and associated changes in the DPL.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The glob in modules/Kconfig accidentally picked up Kconfig.tls-generic,
which is only supposed to be included from modules/Kconfig.mbedtls.
Replace the globbing with explicit 'source's to fix it. Best to avoid
globbing unless absolutely necessary, because it tends to pick up random
non-checked-in files as well.
Use 'source' instead of 'osource' since the files are known to exists.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add STM32 CRYP driver support and a corresponding build-only test to
the crypto sample project.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This patch adds crypto driver support for all STM32F4 devices providing
a CRYP peripheral.
This driver implements the AES ECB, CBC and CTR modes of operation.
It has been tested on a STM32F437 SoC running the Zephyr crypto driver
sample.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Reflect changes in the APIs made since 0.6.0. These will also need to
be added to the release notes.
Some automatic directives weren't generating the desired output, so
either do it by hand or let new 0.7.0 docstrings supply the information.
Try to better group the content into sections.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
West now supports importing other manifest files. Document the basic
behavior.
Add a local table of contents for HTML output, to get a quick index of
the subsections of the "Manifest Imports" section.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
