The `DEBUG_INFO` in the `EXCEPTION_STACK_TRACE` is only
required by x86. Move that to `X86_EXCEPTION_STACK_TRACE`
instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Changes twister tests and nrf samples from using legacy adv to ext adv
since this is the default for Mesh. Legacy adv is still tested in bsim.
Removes redundant test configuration testing ext adv.
Removes redundant config for ext_adv in `multi_ext_adv.conf`.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
It is not correctly to call Zephyr API from bsim
HW thread.
Commit moves friendship test suite semaphores
initialization into test bodies.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
PR #72475 disabled default enabling of most Mbed TLS features.
This means that:
- CONFIG_MBEDTLS_CIPHER_AES_ENABLED needs to be manually enabled
when required;
- CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC does not need to
be (almost) always added because there is no default RSA
key-exchange enabled, so PSA can be built without RSA support.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add support for Nuvoton numaker board numaker_m2l31ki.
m2l31x has 4 MPU regions and can't afford one more region
for USERSPACE, so set CONFIG_USERSPACE=n in m2l31ki_defconfig.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
The number of suitable network IPv6/4 configurations in interfaces
affect the number of pollable sockets. So need to increase the value
from the default value of 3.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The function is useful for application to lookup set
members from bt_conn pointers, e.g. when iterating on
connected devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
test_packet_sockets_dgram create ETH_P_TSN sockets but
send and recv ETH_P_IP packet.
Fix it by sending ETH_P_TSN packet.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Updated sample to test DFU with mcumgr.
Use paths to default domain build dir from device_config.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add RISC-V architecture specific atomic instructions, not present in
atomic_builtin.h
Signed-off-by: Aleksandar Cecaric <aleksandar.cecaric@nextsilicon.com>
Add test suite using python-can for testing Controller Area Network (CAN)
communication between a host PC and a device under test running Zephyr.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In the current implementation, the LLEXT linker will only apply
relocations targeting a given symbol if it has a specfic symbol type.
This is overzealous and causes issues on some platforms, as some symbols
that need to be relocated are skipped due to being of a "bad" type.
Ignore the symbol type when performing relocation to solve this problem,
but also add checks to ensure we don't attempt to relocate symbols with
an invalid section index. If such a relocation is found, return an error
instead of ignoring the relocation entry to ensure that it is impossible
to execute code from a (partially) unrelocated LLEXT.
Also remove all hacks added to circumvent this issue:
* qemu_cortex_r5 exclusion from test cases
* unnecessary exclusion of some flags when building with LLEXT EDK
Fixes#72832.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
In an effort to shave off code size, remove out-of-the-box
enabling of crypto features (except SHA-256).
Configurations are adjusted to enable what they need.
Bonuses:
- When enabled, AES now defaults to using a smaller version
(`CONFIG_MBEDTLS_AES_ROM_TABLES` isn't default enabled anymore,
and if enabled, `CONFIG_MBEDTLS_AES_FEWER_TABLES` defaults to y).
- Conditions around Mbed TLS Kconfig options have been improved
to reflect the reality of the dependencies.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Modify the BAP and PBP samples to start with the profile name
(BAP or PBP) and the role of the sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pin thread to a specific cpu. Once thread gets cpu, check
the cpu id is correct and then thread will give up cpu.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
This commit has added new flag FS_O_TRUNC to support truncation
during file open. Modified fs_open to handle truncation based on
provided flags. Included unit tests for flag behavior with common
filesystems.
Signed-off-by: RAJAGOPALAN GANGADHARAN <g.raju2000@gmail.com>
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for tests/crypto/mbedtls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Random number generator is a subsystem and although it is mostly used
in crypto, this is not its only utility.
Move the current random number generator test to it is own space
(tests/subsys/random) and rename it to rng.
We need more and better tests for rng, this is an initial commit
to organize it and get ready for further tests.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Various SoCs have different limitations when it comes to DMA buffer
sizes. This change allows to chose a suitable value for them.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Fix the tests before a build time check is added to validate the
addressable size. Most tests have an eeprom size of 1024 defined but width
8-bit addressing, the majority of the eeprom cannot be addressed
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Exclude the Apollo4 platform from LLEXT tests for now,
as they currently break CI due to #72775.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
When using the post_init_f to initialize the `bst_result`,
it is not possible to mark the test as
passed immediately as the `bst_result` will be
initialized after the test completes.
This change should overcome this limitation.
Bluetooth mesh tests are kept as is as we are not
sure if this will change the behavior.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add possibility to test all four SPI modes (CPOL, CPHA).
Add possibility to test different bitrates.
Add tests that checks handling of zero length buffers on master.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add overlay file for nrf54h20.
Align code and DTS between spi_error_cases and spi_controller_peripheral.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Rename the current sensor_read to sensor_read_async_pool and create a
new blocking sensor_read helper.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
- Adds boot_request_upgrade() return value check.
- Avoid repeating resets if the upgrade request fails.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The 'tfm' tag was removed from the samples in in
7c80473e0a but it remained in use in other
parts of the project.
This change brings back consistency through out the project.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
The deprecated gsm_ppp modem driver will be removed. Remove
gsm_ppp modem driver from build_all test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
In order to be compatible with Linux AF_PACKET socket calls, the
protocol field needs to be in network byte order.
So for example, if user wants to receive all packets, then the
protocol field needs to be set as "htons(ETH_P_ALL)".
See Linux manual page at
https://www.man7.org/linux/man-pages/man7/packet.7.html
for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When tests control the LwM2M client entirely through
shell, we should be able to set the RD client context
from the application without causing RD client to
start registration.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This commit fixes#73337.
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for net.socket.register.tls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Refactor CSIP btp commands by removing the 'count' parameter from
set_coordinator_lock and set_coordinator_release functions.
If we want to support lock/release procedure on subset of set members
in the future, 'count' param doesn't indicate a specific set member.
Instead, introduce 'address_count' and 'addr' array params, although their
usage is not yet implemented.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
native_sim//64 is one of the allowed platforms
but lacks an overlay which causes the test to fail
to build.
Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Display diff of contents for large buffers is not quite helpful and
takes up huge RAM, and if a board has less RAM then this causes the test
module build failures.
So, disable display of diff and just log a failure, small buffer tests
can be used to debug such basic issues and large buffer tests can act as
a smoke test for debugging other issues. This saves about 80K of RAM.
Fixes#72792.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When verifying sw_isr_table, take into account custom offset,
like `CONFIG_RISCV_RESERVED_IRQ_ISR_TABLES_OFFSET` in some
RISC-V SoCs.
Relates to #71948 and #73232.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Adding a separate overlay for nrf54l15 flpr is required because
running tests on console uart fails.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
