Adds native_posix hw counter model and the counter driver.
Functionality is needed by software which is tested
on native_posix and has dependency on counter.
Hardware model was developed similarly to HW timer model.
The counter driver wraps HW counter functions and exposes
basic functionalities: starting, stopping, setting and cancelling
single channel alarms.
Code was tested against: tests/drivers/counter/counter_basic_api.
Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no>
Add HSE,HSI,CSI,PLL as system clock options.
Also add correct configuration of the PLL.
New sysclk options:
- HSI with: CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI=y
- HSE with: CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE=y
- CSI with: CONFIG_CLOCK_STM32_SYSCLK_SRC_CSI=y
Existing sysclk options:
- PLL with: CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
PLL clock options:
- More PLL source clocks:
Existing:
1. HSE with: CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
New:
2. HSI with: CONFIG_CLOCK_STM32_PLL_SRC_HSI=y
3. CSI with: CONFIG_CLOCK_STM32_PLL_SRC_CSI=y
- PLL vco input range is auto-calculated based on PLL DIVM1
-> Example for sysclock 96MHz generated with PLL from HSI
CONFIG_CLOCK_STM32_PLL_SRC_HSI=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=96000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=12
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2
Use LL_SetFlashLatency function from stm32h7xx_ll_utils.h
instead to setup the correct latency.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Currently, the application could receive a duplicate CONNACK event, in
case the server rejected the connection at MQTT level (with an error
code provided with CONNACK message). A subsequent connection close (with
`mqtt_abort` for instance) would produce the duplicate event.
Fix this by reporting back to the MQTT engine, that the connection was
refused, so it can close the connection rightaway. Rework the event
notification logic, so that DISCONNECT event instead of a duplicate
CONNACK event is notified in that case.
Also, prevent the MQTT engine from notyfing DISCONNECT event in case of
socket errors during initial connection phase (i. e. before
`mqtt_connect` function finished).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a test suite to validate the Software Vector Relaying
feature for Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In CPUs with VTOR we are free to place the relay vector table
section anywhere inside ROM_START section (as long as we respect
alignment requirements). This PR moves the relay table towards
the end of ROM_START. This leaves sufficient area for placing
some SoC-specific sections inside ROM_START that need to start
at a fixed address.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
is_init field is useless, because there is only single code path that
always sets it to true before using it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
instances that do not run will have no results (beside the fact they
built successfully), so log those as such.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend the gen_isr_table test suite to build and run
on Cortex-M baseline platforms. Add a few platforms
in the whitelist so the test builds and runs for some
common Baseline Cortex-M insluding the QEMU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding tags for ARC-variant of the test.
Rename test string to comply with ARM-variant name.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make sure IPv6 address is removed from network interface in IPV6CP
protocol down handler. This makes sure that application can receive
high-level notification about missing network connection.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure IPv4 address is removed from network interface in IPCP
protocol down handler. This makes sure that application can receive
high-level notification about missing network connection.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Ensure multiple OOB transactions can be perform back-to-back
Check OOB transaction response length matches is as expected.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
eSPI slave driver should only indicate that a channel is ready
after the eSPI master has enabled said channel.
However, this indication is incorrectly sent during eSPI reset
even before channel renegotiation starts.
Perform only channel-specific interrupts enabling inside
initialization functions.
Send Channel ready ack only after channel negotiation is received.
Add missing callbacks for channel events to notify client driver.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Updates the contribution guidelines to document the current board policy
of rejecting non-OSI-approved licenses.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
The log output instances all named "log_output" in backends
collide with the "log_output" parameter of various functions.
This renames the variables in the backends to make them
more descriptive. Same goes for the buffers for some of
these instances as they are all named "buf", and "hostname"
being used in the network backend, so they are renamed.
There are a few places where variables are overriden within
an inner scope (e.g. inside loop and if block) so they are
also renamed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
There is a global variable named "dev" to store which UART
device is being used the tracing backend. This name collides
with the parameter of same name in the ISR function. So rename
the global variable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
In the function smp_init_top(), the variable "start_flags"
collide with global variable of the same name. So rename the one
inside the function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
In the function sys_heap_alloc(), the variable "chunksz"
collide with function named chunksz(). So rename those variable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
In the function z_set_timeout_expiry(), the parameter "idle"
and an inner variable "next" collide with function named idle()
and next(). So rename those variables.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope. There are a few spinlock
keys simply named "key". So rename those in inner scope to avoid
shadowing the outer ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This PR fixes the links to the example files in the Gitlab repository.
Fixes Dir 4.8 and Rule 2.1, 5.1, 5.8, 5.9, 8.5, 8.6, 13.1, and 13.5.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
printf function didn't have enough specifiers for the
number of arguments in the command line (Coverity warning).
Fixes#26985Fixes#26986
Signed-off-by: David Leach <david.leach@nxp.com>
Added the 'fall through' comment to switch to quiet compiler
and coverity warnings.
Fixes#25724Fixes#25726
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity is not able to detect that the call to ztest_test_fail()
will not return so it emits a warning on a later access to
param. Add a return; after the call so coverity won't complain.
Fixes#25790
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity warnings on dead loop code. We know this can
occur if the NUM_CPUHOLD is defined as zero which occurs
when CONFIG_SMP is false.
Fixes#20516Fixes#20517
Signed-off-by: David Leach <david.leach@nxp.com>
Suppress the coverity warning on using the semaphore as
this semaphore is used and freed only in this function.
Fixes: #18960
Signed-off-by: David Leach <david.leach@nxp.com>
This is a cargo-culted attempt to make an error observed in poorly
understood CI circumstances go away when loading edt.pickle, by making
edtlib visible in sys.modules before loading the pickle file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add @abrodkin to the list of CODEOWNERS for ARC code (ARCH,
BOARDS, DTS) instead of @vonhust.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding the get_maintainer.py script
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an entry in CODEOWNERS for auto-assigning reviewers
in MAINTAINERS.yml and get_maintainer.py files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch enables the rtc so that the testcase
tests/drivers/counter/counter_basic_api
can run on this nucleo_f091rc board
also when running sanity check
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The Olimex STM32-h103 is a development board based on the STM32F103RB,
very similar to the stm32_mini, which was used as a reference for the
pinmux configuration.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
This sample is nothing more than just a special setup of UART for some
nfc, has nothing specific to nfc and might be misleading, so removing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just as NULL pointers should not be dereferenced, they should
not be called either.
Fixes 26723
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Remove the device_type = "memory" property from the PSRAM node. We make
the slightly arbitrary distinction of using 'mmio-sram' compatible for
memories that don't need some kinda of dram style configuration or may
be on die.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rewrite 'exit_tickless_idle' macro to make code more readable.
No functional changes intended.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
NOP instruction is available via builtin for ARC so get rid of all
ASM inlines with NOP/NOP_S instructions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Zephyr has generic find_msb_set and find_lsb_set implementations.
They are based on builtins so they are optimized enough.
Drop custom ASM implementation.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
_vector_table and __vector_relay_table symbols were exported with GTEXT
(i.e. as functions). That resulted in bit[0] being incorrectly set in
the addresses they represent (for functions this bit set to 1 specifies
execution in Thumb state).
This commit corrects this by switching to exporting these objects as
objects, i.e. with GDATA.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update stm32 ethernet driver to get basic boot configuration from
device tree.
So far information are:
- Label
- Base address
- IRQ number and prio
- Clock settings
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
