The name and wording used in template can be misleading.
Use more accurate word instance instead of device since
an implementation does not necessarily have to implement
a device (in the sense of Zephyr device model), and if it
does then devicetree should be used to describe number of
instances as in the case of CDC ACM implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The function checked several value, but the BAP spec does
not specify that these cannot be different from stream to
stream in the CIG. The function thus did nothing but needlessly
restrict the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit fixes issue introduced in
5d059117fd.
Use extra flag stored in user data of net_buf to control segmented
messages in Friend Queue. The initial idea with using fragments didn't
work.
This fixes the following PTS tests:
- MESH/NODE/FRND/FN/BV-08-C
- MESH/NODE/FRND/FN/BV-19-C
- MESH/NODE/CFG/HBS/BV-05-C
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fix UDP TX packet count when DHCPv4 is used. Currently UDP TX counter
is only updated when net context is in use. DHCPv4 however does not use
net_context underneath, therefore it needs to update UDP TX stats on its
own.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds the support for host commands being transported
by the Serial Host Interface on the NPCX SoC.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
A variable was defined directly after a label in two case statements,
resulting in build warning with certain compilers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes two issues with the JIT scheduler:
Rescheduling of primary advertising packets for extended advertising
when using the JIT scheduler did not work, since the done events for
the primary events never made it into the reschedule logic
The EVENT_DONE_EXTRA_TYPE_ADV_AUX event (for auxillary packets) could
cause a "reschedule" for a primary event that was actually sent
successfully (causing it to be sent twice)
Signed-off-by: Troels Nilsson <trnn@demant.com>
This prevents a configuration error by selecting the console if
the UART MCUmgr transport is used, which is actually a dependency
for this transport.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update sdmmc framework to use sdmmc_wait_ready when accessing card in
SPI mode. this will allow cards that do not return to ready to be polled
for busy status until the SD data timeout expires
Fixes#52931
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Recently introduced MISRA-C CI check complains about use of a duplicte
tag, so, shorten the variable from shell->sh to avoid same name as the
structure.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Add a new callback list structure for state change information.
These APIs are meant to eventually replace the single callback API
provided by openthread_set_state_changed_cb().
This will allow multiple users to gain information about
OpenThread stage changes.
Note CONFIG_OPENTHREAD_MAX_STATECHANGE_HANDLERS
with OpenThread's otSetStateChangedCallback() API can also be
used to enable registration of multiple callbacks of this type but this
cannot be modified if a certified OpenThread binary is used in the
build.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
USB_TRANS_NO_ZLP flag has no meaning for usb_transfer() in
host-to-device direction (USB_TRANS_READ).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
audio_iso.c should only be compiled if we require any streams,
so it is now guarded by CONFIG_BT_AUDIO_STREAM.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After several fixes of the re-ordering logic in TCP, the receive queue
works as intended and cleans itself up properly. Previously the default
timeout was 100 ms, which pretty much disables it for real applications.
Increase the timeout to 2 seconds to actually enable it for in practice.
This should help pass much more of the Maxwell Pro tests.
This is the first step before removing the timeout completely.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
In case that CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SNK_COUNT or
CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SRC_COUNT is set to NULL, the
unicast client implementation in the shell would have compile
warnings, since the arrays would be 0 and we would attempt to
access it some places (or rather the compiler/linker would
think that, but it would never happen at runtime).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Array 'days_in_month' of size 12 may use index value bigger then
count of its elements.
Signed-off-by: PawelX Dobrowolski <pawelx.dobrowolski@intel.com>
Fixes an issue whereby event ID was not checked properly, meaning
that OR'd events would not work as one would expect.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Setting a detected packet family (ipv4 or ipv6) in net_context level
instead in lower layers for AF_PACKET/SOCK_RAW/IPPROTO_RAW type sockets
when sending data.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Clear the `ATT_CONNECTED` flag when a channel is detached (could be after
an ATT timeout).
Also convert the assert checking it in `chan send` to an `if` test, since
the channel could be disconnected from a different thread than the one
triggering `chan_send`.
Fixes#53247.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Change the BT_AUDIO_ISO logging module to use
log_config_inherit to be consistent with the other LE Audio
logging modules.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The TinyCrypt is the current library used by UpdateHub to perform
SHA-256 integrity check. This refactor code and add support to
mbedTLS library. It changes default library to mbedTLS to use
hardware accelerator when available.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently choice for FLASH_AREA_CHECK_INTEGRITY does not have a
denomination. Without that it is not possible select a default
backend hash backend for integrity check at project configuration.
This add a name to allow select flash area check integrity backend.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
ISO Synchronized Receiver only builds do not transmit and
hence may not have any tx buffers allocated in a
Controller, leaving bt_dev.le.acl_pkts semaphore
uninitialized or bt_conn_get_pkts() returning NULL.
Do not use the semaphore if no Tx buffers allocated in a
Controller.
Regression in commit ef19c64f1b ("Bluetooth: host: poll on
CTLR buffers instead of host TX queue").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add common function to handle large GATT reads of strings.
Initialize the buffer pointers in the net_buf which is used for large
GATT reads by bt_tbs_client_read_call_state() and
bt_tbs_client_read_current_calls().
Define the size of the allocated buffer based on the enabled features.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
The way that the braodcast clause for handling failing
ISO data path would end up in the __ASSERT. It has been
slightly modified to make it use if-else properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The direction of a stream/endpoint/parameter has just been
logged as a unsigned integer. This commits adds a
value -> string internal function that would log
BT_AUDIO_DIR_SINK as "sink" and BT_AUDIO_DIR_SOURCE
as "source".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Update the SBS Gauge driver that implements the fuel_gauge API to implement
a set_property function allowing the writing of an SBS word to the
manufacturer access register per the SBS spec.
Includes an update to the SBS Gauge emulator and SBS fuel gauge tests to
weakly verify the code runs.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Fix SBS I2C transfer emulation to accept reads and writes of 16 bit words
as defined by the SBS spec. This change is tested by a following commit
that implements writing and subsequently reading a written SBS property.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Implement and weakly test fetching the manufacturer access word from an SBS
compatible fuel gauge.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The macro BT_CONN_INTERVAL_TO_MS was used a fair amount
of places, but it often was used with integers. This meant
that sometimes the resulting (integer) value would be
incorrect, as something like 7.5ms interval would not
be properly stored as a integer in millisecond units.
Adding BT_CONN_INTERVAL_TO_US allows users to still use
integers to store the result, but in a more accurate unit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The IPv4 autoconfiguration feature relies on the fact, that autoconf
ARP packets are always prepared by the ARP module. After recent ARP
refactoring though that could no longer be the case due to packet
queueing mechanism. This could lead to net pkt leaks in the autoconf
module.
Fix this by skipping the pending packet queue for autoconf packets.
Since for autoconf ARP requests there's no really a pending packet
to queue, it can be safely avoided. This results in the ARP request
being always sent for the autoconf case, preventing the packet leak.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check data buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to res data length when data type
is fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
This fixes possible ASE state race condition. The notification is sent
immediately once the ASE state changed that eliminates a situation where
the state was changed by user action (API function call) when the state
was not yet notified to the remote Unicast Client.
Fixes: BAP/USR/SCC/BV-158-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
