Add command to perform the Periodic Advertising Set
Info Transfer procedure, which transfers information
about a periodic advertising set to a connected device.
In essence this is just PAST but from the advertiser
instead of a 3rd device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In ascs.c we had a case where we assigned stream->conn
without taking the ref.
In bt_audio_stream_attach we did not check if stream->conn
was NULL before taking a reference, causing multiple calls
to ase_config to take multiple references.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The purpose of this commit is to facilitate future improvements to the
LPN and friendship feature. By being able to identify friendship related
messages on the advertising layer, it will be possible to treat these in
a specific manner so that message exchange between LPN and friend
devices can be conducted in a more power efficient manner.
This commit adds the following:
- A separate tag for friendship related messages
- A optional separate advertising set for friend related messages
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds Kconfig option to enable tuning the Friend receive delay window.
Friend poll events can be made more efficient by compensating for the
time the non-ideal advertising latency otherwise would add to the receive
delay.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This changes some of the MCUmgr transport CMake select statements
to depends on, this is to align with other in-tree symbols that
do not pull in whole subsystems and instead only allow selection
if those subsystems are already enabled.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
- Adds mmc.c
- Edits sd.c to init and probe MMC
- Adds mmc init to sd_init
- Some functions from sdmmc.c should be in sd_ops because
they can be used by both sdmmc and mmc.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
In sd subsystem, made one header for all the init functions
instead of having a bunch of header files with one function.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
split reusable portions of SDMMC protocol code into sd_ops.c, so other
SD protocols can use these functions directly without compiling in the
SDMMC subsystem.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add stub code for SDIO support, capable of verifying card responds to CMD5.
This commit also changes the architecture of the SDIO probe step to make
adding new protocol support more streamlined, and enable compiling out
support for undesired protocols.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit moves the files under `subsys/cpp` directory to the
`lib/cpp` directory because the C++ ABI runtime library and the
standard C++ library components are not a "subsystem" (aka. API) in
conventional sense and is better described as a "library."
Classifying the C++ ABI runtime library and the standard C++ library as
"libraries" instead of "subsystems" also better aligns with how the
existing C standard library implementation (`lib/libc`) is handled.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Wi-Fi bands are regulated by a governing body depending on operating
country, add support for the user to provide a country of operation as a
hint to the Wi-Fi chipset.
Ideally if the chipset supports this is all handled internally, in that
case "get" is useful but for testing and other usecases add a "set" as
well, similar to "iw reg set" or "country_code=" configuration in
hostapd/wpa_supplicant in Linux world.
This add a new offload API operation "reg_domain" that can be used to
either get or set the regulatory information.
The validation is left to the underlying chipset, shell only does basic
validation, (XY/00).
This is just a regulatory hint to the chipset, there could be other
regulatory hints e.g., beacon that can override this configuration, so,
an additional option to force this setting despite other hints is also
given for testing purposes.
FYI, the standard database used is [1].
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/tree/db.txt
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
under certain conditions the current implementation did not maintain
the desired sort order.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Add the ability to change supported contexts in PACS.
Enhance the context command in the shell module to make it configurable.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
base name or name can contain up to two shorts.
(object id & object intstance or resource id & resource instance id)
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
The purpose of the change was to have the Zephyr network stack
internally add the IGMP all systems 224.0.0.1 multicast address to a
multicast membership list so that multicast hash filter implementations
can add this address to the hash filter.
Fixes#53548
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
The call to bt_adv_reset_adv_pool is only required in the
broadcaster role, and not in the observer role, regardless
of the setting of CONFIG_BT_EXT_ADV
As the code was this call was also made for the observer.
Note: handling of the setting of CONFIG_BT_EXT_ADV
is already handled in the bt_adv_reset_adv_pool function
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
BOOT_MAGIC_SZ and BOOT_MAX_ALIGN were used in the header without
including bootutil/bootutil_public.h. This change remove the need of
the inclusion by making the dependency private.
Fixes#52095
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Fix a bug in setting MAC address using net_if API, the API doesn't do a
memcpy but just stores the pointer and shell was passing stack pointer.
We can use dynamic allocation but freeing the memory for the MAC address
would be trickier, so, use the net management API and let the underlying
drivers figure out the MAC address memory management.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
There is special handling done for resolved addresses to convert
them to "regular" addresses for the upper layers.
This commits adds two helper functions to check if they are
resolved, and if so, then properly copied.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We only expose random/public address types to the upper layers.
This is done by checking if the address type of events are
resolved addresses, and if so, then we translate them to
public/random.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As we have to provide LL addresses in big endian to userspace to be
POSIX compliant and we also do not want to reserve extra space for
such addresses, bff6a5cce5 introduced
a change that swaps address bytes in place in the packet before
returning the packet with LL address pointers to userspace.
Unfortunately a regression sneaked into the code base while doing
so: The byte swapping was duplicated when using 6LoWPAN compression
and the byte swapping caused decryption to fail in some cases,
see #53630. This commit fixes the problem.
Fixes: #53630
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The L2 networking layer checks for return value from enable, but
Ethernet is not checking and always returns 0, so, relay the return
value from the Ethernet driver to networking stack.
This fixes the issue of interface start failing but interface still
being up.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This add storage abstraction to allow switch between different flash
APIs. This remove the erase command at updatehub core and move it to
storage init phase.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Move header includes to source file. Currently firmware source files
have a hardcode partition identificator. This moves identificators
to updatehub core.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
For all commands and replies, the buffer length needed to build or the
length of data needed to decode needs to be checked and asserted. Right now
we do this by ad-hoc if-s. Add macros that do this at a common location.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The raw, flags check has become a bit excessive and has begun to affect
code readability. Provide inline functions for those accesses that are
frequent. Also, get rid of `struct osdp_cp` as it can be fully represented
by `struct osdp` itself.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
CP has an array of PDs and pd->offset was the position of the PD in CP's
list. Since offset has many meanings, rename it to pd->idx.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Partial packets in the RX buffers cause the subsequent packet to be
treated as malformed. The RX buffer can have partial data if the sender
is too slow in sending the packet of if there is an interruption in
transmission mid-way.
To avoid any issues due to such partials, flush the uart channel before
sending the command/response.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The log lines in CP and PD had a prefix such as "CP: " and "PD: " that
does not add too much value as a given device an either be CP or PD
only. This patch removes those and enhances some other log lines while
at it.
It also adds a enum for return values throughout the module to improve
code quality.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Use a flag to report a protocol error to the states. This keeps
state specific actions in the state. Currently, those state
specific actions are handled in the pe_report_error function.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
