Commit graph

12 commits

Author SHA1 Message Date
Kumar Gala
1951c79db4 drivers: gpio: cmsdk_ahb: Convert driver to be full DTS based
Convert driver to utilize the new DT_INST macros completely and remove
associated Kconfig symbols that now come from devicetree.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-04-03 04:11:36 -05:00
Kumar Gala
28d060513c arm: mps2: Convert gpio to use device tree
Add binding for arm,mps2-fpgaio-gpio and update device tree and change
FPGA GPIO init code to utilize device tree defines.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-23 10:26:56 -05:00
Anas Nashif
3ae52624ff license: cleanup: add SPDX Apache-2.0 license identifier
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier.  Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.

By default all files without license information are under the default
license of Zephyr, which is Apache version 2.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-07 08:45:22 -04:00
Kumar Gala
7809970c8a drivers: counter: cmsdk: Convert to new DT_<COMPAT>_<INSTANCE> defines
Convert cmsdk driver to use new defines so we can remove the
dts_fixup.h code for it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-02-07 16:14:00 -05:00
Kumar Gala
61cb8b6c4f drivers: wdog: cmsdk: Convert to new DT_<COMPAT>_<INSTANCE> defines
Convert cmsdk driver to use new defines so we can remove the
dts_fixup.h code for it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-25 08:55:06 -06:00
Kumar Gala
4b6cec44ff drivers: uart: cmsdk_apb: Convert to new DT_<COMPAT>_<INSTANCE> defines
Convert cmsdk_apb driver to use new defines so we can remove the
dts_fixup.h code for it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-25 08:55:06 -06:00
Kumar Gala
da474efe80 drivers: i2c: i2c_sbcon: Convert to new DT_<COMPAT>_<INSTANCE> defines
Convert i2c_sbcon driver to use new defines so we can remove the
dts_fixup.h code for it.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-25 08:55:06 -06:00
Vincenzo Frascino
bd34448a75 dts: arm: Code Cleanup in mps2_an385
This patch cleans up the code in the recently added dts_fixup.h,
restoring the original alignment of the file.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
2018-12-14 07:24:48 -06:00
Vincenzo Frascino
48721fb42a dts: arm: Fix Dual Timer IRQ config for mps2_an385
The dts.fixup for mps2_an385 contains a wrong setting for the IRQ fixup
for the Dual Timer IRQ.

This patch fixes the symbol included in the generated header.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
2018-12-14 07:24:48 -06:00
Andrzej Głąbek
20202902f2 dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig
These changes were obtained by running a script  created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:

1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
   #define X Y)
3. Check if that name is also the name of a Kconfig option
   3.a If it is, then do nothing
   3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
       has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
   (.c, .h, .ld)

Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.

Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 10:44:42 -06:00
Andrzej Głąbek
f39ba7230d dts_fixups: Update labels generated from DTS with DT_ prefix
All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_"
in their names, assumed to be generated by the extracting script,
are updated with the DT_ prefix, to reflect the recent changes made
to the script.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 10:44:42 -06:00
Sebastian Bøe
8eb734cd82 DT: Rename from dts.fixup to dts_fixup.h
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.

To this end we rename the dts.fixup files to the correct file
extension '.h'.

This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.

Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
2018-10-08 11:38:56 -04:00
Renamed from boards/arm/mps2_an385/dts.fixup (Browse further)