This adds the CMOS RTC node to the common devicetree files
for x86. Note that this is not added to Lakemont, as it is
usually used for embedded applications which would not have
CMOS RTC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add DTS binding for Motorola MC146818 compatible Real Time Clock.
This is being used for the RTC/CMOS timer on x86 PC-compatible
platforms.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CSV file is expanded to store run_id and the corresponding test
requires a modification.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
A unique run_id is now also added to the twister.csv file. This
file is used to store meta-data, in particular for `--test-only`
option. The run_id is then reused in `--test-only` calls to verify
if the id from readout matches the expected one.
fixes: #45278
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Store sensor trigger structure reference provided on `trigger_set`, and
pass reference back to client when trigger callback is invoked.
This will enable client to use `CONTAINER_OF()` inside its trigger
callback code.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Building documentation in .rst format causes warnings due to
missing nrfx_atomic which is not used in hal_nordic.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add support for missing EHL SKUs. The information about SKUs is
already public and available in Linux kernel:
https://github.com/torvalds/linux/blob/
38f80f42147ff658aff218edb0a88c37e58bf44f/drivers/edac/
igen6_edac.c#L197-L208
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit corrects the reference to a non-existent Kconfig symbol
`CPU_CORTEX_M` in the filter, which effectively disabled this test for
all platforms, to `CONFIG_CPU_CORTEX_M`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update the CMSIS fork to import a function required for correct
operation of the CMSIS-NN tests.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use the EFI console exclusively on up_squared, instead of allowing the
16550 UART driver for the same hardware (which works fine) from
overriding it after early initialization.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Where we have access to a bootstrap UEFI environment, it's productive
to use that console as the default printk handler. That avoids the
bringup hassle of trying to configure UART settings blindly, as has
been customary. It also emits nice text to the framebuffer on devices
with no serial port or other debug harness at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Previously, the att_mtu_updated callback was only called on initial
connection of the channel or during the MTU Exchange procedure. There
was no way for the application to know that the MTU increased in the
case where the peer initiated the reconfiguration.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
cavs15 uses different base addresses for IP blocks than the rest
and thus needs its own configuration in device tree.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add optional PINCTRL support to the Microchip XEC PS2 driver
shared between MEC15xx and MEC172x families.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Update the Microchip XEC PS2 driver to support MEC172x.
NOTE: MEC15xx has two PS2 controllers and
MEC172x has one.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
since the flexspi driver interacts with the flash device, storing
device data in flash can cause RWW hazards when running in XIP mode.
Move all device data to RAM to limit these RWW hazards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
since the flexspi driver interacts with the flash device, storing
device data in flash can cause RWW hazards when running in XIP mode.
Move all device data to RAM to limit these RWW hazards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move all device data to RAM. Since the flexspi driver accesses the
flash device that is being used for XIP, various RWW hazards can occur
if the flexspi driver is interacting with the flash device, while
running in XIP mode.
Fixes#45182
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add sample code that demonstrate the usage for Nuvoton ADC Comparator
driver, this driver is available for NPCX microcontroller family,
this sample is supported on npcx9m6f_evb board.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Comparator will monitor signal though ADC channel, based on
user configuration, callback will be triggered.
This will enable comparator functionality for nuvoton MCU utilizing its
ADC threshold detection feature. Implementation is exported through
sensor trigger API. Use of CONFIG_ADC_CMP_NPCX is required.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.01.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/9
(merged as 52a522ca4a8a9ec1e9bb5bb514e1ab6f102863fe)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Refactor code so that an unused variable 'adc' warning
is not generated when building for CONFIG_SOC_SERIES_STM32G4X
and not using adc1 or adc5.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Bluetooth Host calculated authentication value correctly only
for data smaller than 255 bytes. If data is larger then
authentication transformation used wrong flags.
Since the issue was symmetric two Zephyr
based devices were able to understand each other. Hence,
other devices like Android or IOS smartphones weren't able
to authenticate large frames and broke communication.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
We want to use a sparse address space to identify invalid conversions
between cached and uncached address aliases. This patch adds a
__sparse_cache sparse annotation for that. Where those conversions
must be done that has to be supported by using the __sparse_force
sparse attribute. To avoid compiler complains about unknown
attributes we add a -Wno-attributes flag when building with sparse
support.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Refactor the Bosch M_CAN shared driver functions to get rid of the
front-end driver wrapper functions.
This requires flipping the relationship between shared config/data
structs and front-end config/data structs. Front-end drivers can now
store a pointer to their custom config/data structs in the .custom
fields of the can_mcan_config and can_mcan_data data structures.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the private header file for the Bosch M_CAN shared driver code
from can_mcan_int.h to can_mcan_priv.h to follow the common naming
scheme.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Enable the messaging unit for NXP i.MX8M Mini EVK boards. This is a
necessary requirement to be able to run rpmsg examples later.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
enable pinctrl for mimxrt685_evk. The pinmux file is retained to handle
setting up shared signal sets for I2S tests, since this pin mux setting
is not managed by the pin control driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
update help text for mcux rt pinctrl peripheral driver, to clarify it
does not support RT600/RT500 parts and only RT1xxx series parts.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add support for setting pinmux when using IOPCTL peripheral, as well as
setting pin configuration properties.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add pincontrol headers for IOCON peripheral present on NXP iMX RT600
and RT500 SOCs, and update LPC pin control driver for iMX RT family
differences.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
