Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds a preliminary implementation of CMSIS-Core(R) for use
with the ARM Cortex-R port.
At this time, CMSIS-Core(R) is not merged back into the upstream CMSIS
repository and therefore is not available from official sources.
Until upstream merge happens, the preliminary version can be obtained
from the following URL:
https://github.com/stephanosio/CMSIS_5/tree/core_r
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The existing implementation used HAS_CMSIS configuration to specify
that CMSIS-Core(M) is used; when, in fact, there are other CMSIS
variants available such as CMSIS-Core(A) and CMSIS-DSP available.
This commit replaces the existing HAS_CMSIS configuration with
HAS_CMSIS_CORE to clarify that CMSIS-Core is used. It also introduces
the CMSIS-Core variant configuration, HAS_CMSIS_CORE_M, that is
automatically selected when HAS_CMSIS_CORE is enabled.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit relocates the CMSIS-Core(M) Include directory that
currently resides directly under ext/hal/cmsis directory to its own
directory, Core, in order to allow other CMSIS variants to be added.
The name of CMSIS-Core(M) directory, Core, is following the original
name used by the upstream CMSIS repository.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
For CMSIS compilation, we define __PROGRAM_START
to avoid compiling the bss/data initialization
routines provided by CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Maintain this HAL in its own repo:
git@github.com:zephyrproject-rtos/hal_openisa.git
and manage using west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
NRF_UICR needs to be defined for nRF9160 SoC in
nrfx_config_nrf9160.h, because it is not defined
in nrfx/hal/mdk/nrf9160.h (as it is a Secure-only
peripheral).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Several aliases were added to nrf9160[ns].dtsi files solely for
the purpose of getting base addresses of certain hardware modules
via DT_ macros generated for these aliases.
Since for one-instance modules the same can be now achieved with
standard DT_INST_0_* macros, there is no need to keep these aliases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct HAL macros related to eSPI block
Add GIRQ bit definitions for VWires and some peripherals
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
These files should be kept aligned with their templates, so that it is
easy to tell what adjustments are needed to integrate nrfx into Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Support for external LF clock source for nrf52811 was missing.
This is a temporary fix until it is replaced with new version of
nrfx which will contain the fix.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move watchdog.h to drivers/watchdog.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated MEC1501 HAL headers. Add interrupt routing defines for timers.
Fix eSPI virtual wire source access. Add new headers for Port80
capture and TFDP.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
split ext/hal/st into two modules:
- hal_stm32: For the code meant to run on STM32
- hal_st: For the code meant to drive ST components
Fixes#16316
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
stm32mp1 was adding a STM32 specific Core selection Kconfig
symbol while zephyr generic CPU_CORTEX_M4 could be used for the
same purpose.
Remove STM32 specific symbol and use generic one.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Importing MCUX drivers will copy fsl_power and fsl_reset to devices,
not drivers as before. Script will exclude 'freertos' drivers from SDK.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Since LPC devices use different power hardware, a separation is
required between device specific drivers and common drivers.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
