Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a follow-up to commit 9f56cc5531.
Add net/ in the inclusion of ieee802154_radio.h so that the file can
be successfully included.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Automatically apply the "area: Bluetooth Audio" label to changes in the
subsys/bluetooth/audio directory.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It was decided that the Bluetooth audio subsystem should
be in subsys/bluetooth/audio instead of subsys/bluetooth/host/audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add entries in the release notes for ARM Musca-A
and nRF5340 PDK board and SoC removals.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Even though possible to use external pull-up and open drain buffer,
prefer internal pull-up to reduce power consumption.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Enable PECI and KSCAN drivers to evaluate any side-effect
in LPM entry/exit and power consumption.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This commit moves TFM CMakeLists.txt into Zephyr and relocates the
Kconfig.tfm file under the modules/tfm folder.
Updates the manifest to point to related TFM changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support for ISO feature bits. This includes extending fields that
hold features to 64 bits to be able to handle the host-controlled
"Isochronous Channels" feature.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
The CMSDK uart interrupts for TX and RX can either be treated as a
signel interrupt line or distinct interrupts for TX & RX. In the case
that they were distinct we didn't get the ifdef correct based on DTS.
If we have 2 interrupts in DTS we assume they are for TX & RX and thus
build the interrupt support for distinct TX & RX ISRs.
Also, cleanup handling of UART_2..UART_4 to be similar to how
UART_0/UART_1 code is using DT_INST_IRQN(x).
Fixes#30770Fixes#25601
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added Tx fragmentation implementation assertion to check
invalid offset use due to any memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the vendor specific ticker resolution margin in the
central connection initiation offset calculation.
Related to commit 89ab68f242 ("bluetooth: controller:
Vendor specific ticker resolution margin").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the redundant advanced scheduling event margin used
while finding a free space between existing active central
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initial connection event length calculation to
when initiating connection so that initiator with advanced
scheduling to place central connections in a non-overlapping
timeline has the correct ticks slot value available.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We assume that all x86 CPUs do have clflush instructions.
And the cache line size is now provided through DTS.
So detecting clflush instruction as well as the cache line size is no
longer required at runtime and thus removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A recent patch removed use of the cfg structure, but left a pointer to
it defined which causes build failures.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The NPCX clock driver was already using devicetree, just need to make a
small tweak to use DEVICE_DT_INST_DEFINE and update NPCX_CLK_CTRL_NAME
to match the label for the "nuvoton,npcx-pcc" clock controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a simple pinctrl node for the IOF registers under the GPIO
controller node to be used by the pinmux driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert esp driver:
NET_DEVICE_OFFLOAD_INIT -> NET_DEVICE_DT_INST_OFFLOAD_DEFINE
DT label is already required, so use it and drop CONFIG_WIFI_ESP_NAME
option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Convert ublox-sara-r4 driver:
NET_DEVICE_OFFLOAD_INIT -> NET_DEVICE_DT_INST_OFFLOAD_DEFINE
DT label is already required, so use it and drop
CONFIG_MODEM_UBLOX_SARA_R4_NAME option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This include make possible to use the arm_arch_timer on
platform such as Cortex-A9 or Cortex-R7 which has support for
ARM Global Timer.
The global timer is a 64 bit incrementing counter, memory-mapped
in the private memory region.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
