Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In modes where string duplication is not used, the code is
still compiled. On some compilers it was failing due to calling
strncpy which will do nothing because n is 0. Increase
CONFIG_LOG_STRDUP_MAX_STRING to 2 to ensure that n is 1 in that
case
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use ep_idx in usbip_send_common() instead of endpoint address
and get direction from endpoint address.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB setup packet is a part of USBIP_CMD_SUBMIT, but missing
in struct usbip_submit. This patch fixes it and removes
usbip_skip_setup() and adds an additional integrity check
in handle_usb_control().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The transfer length is not stored and processed properly.
Use struct usb_ep_ctrl_prv, which we already have, to store
the transfer length and data. Move usbip_recv() to
handle_usb_control() and handle_usb_data(),
and explicitly copy USB setup packet.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Call the IN callback only if data in usb_dc_ep_write()
is actually written to the intermediate buffer and sent.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use pointer to struct usb_ep_ctrl_prv, which allows to remove
a few variables and simplifies subsequent improvements.
Use consistently ep_idx in handle_usb_control() instead of
ntohl(hdr->common.ep).
Revise logging so that it is clearer what event is being processed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the change to DTS driven clock divider values wrong values
were used in the dts file.
Fixes: #33559
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity complains about unchecked return value for `k_sem_take` which
is called with `K_FOREVER` and thus cannot expire/timeout. Explicity
ingore the return value to silence Coverity.
CID: 219676
Fixes#33019
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Using the new obscured user shell input feature,
provide examples of using it in login and logout commands.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
When building the test for Cortex-M, use an undefined
instruction to trigger a CPU fault, instead of null
pointer de-referencing. That's because null-pointer
access may, in TrustZone-enabled platforms, lead to
a system crash (due to security violation).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix bluetooth audio compilation issue when BT_AUDIO is enabled but
no Bluetooth host services has been enabled.
This leads to an empty library file.
Instead of creating a new library for audio add the sources to the
parent library, similar to how bluetooth services are added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
VOCS does not support the write long procedure, and thus
should not accept any offset in write requests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds bt_conn_iso function to safely access the struct bt_conn_iso
within a bt_conn.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel direction was actually a source of confusion since the spec does
actually define the data path direction from controller point of view
meaning input actually means transmit and output receive, also direction
can be configured with different QoS settings.
To make these APIs less confusing and allow QoS to be configured
independently they are now split into RX (receiving) and TX
(transmission) settings including its data path.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CHECKIF is preferred as it handles full runtime error handling in
addition to just asserts.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bt_iso_cleanup when there are still channels bound to the
ACL connection.
On top of it introduce bt_iso_chan_unbind which can be used to unbind
channels and thus release the reference to the ACL connection if that
has not been disconnected in which case the channels are unbind
automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the channel has just been bound but is not connected yet there is
no need to send any command over the air but the disconnected callback
shall still be called in order to notify the channel owner that it has
reached disconnected state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When initiating a disconnection conn_disconnect would be called to send
HCI_Disconnect but the controller may be quick enough to send Disconnect
Complete event before setting BT_CONN_DISCONNECT which will then cause
the invalid transition from BT_CONN_DISCONNECTED to BT_CONN_DISCONNECT
and the connection won't be freed properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes a regression introduced by 4350021f09 which prevents
references to be properly release when there is an ISO connection.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Several wifi drivers add some form of zephyr_include_directories(.)
which isn't needed since the headers in the specific driver dir get
included via #include "foo.h". So we can remove any uses of
zephyr_include_directories(.)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial board support for the MPS3 AN547. The board support is
based on the MPS2+ AN521 board support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The AN547 is a Soft Macro Model implementation of the SSE-300 subsystem
with Ethos-U55 and Cortex-M55 components targeting the MPS3 board.
The SoC support is based on the AN521 MPS2+ support that already exists
in Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial support for the Cortex-M55 Core which is an implementation
of the Armv8.1-M mainline architecture and includes support for the
M‑profile Vector Extension (MVE).
The support is based on the Cortex-M33 support that already exists in
Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
net_eth_carrier_on() and net_eth_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
While at it, save network interface pointer during ethernet context
initialization, so that is becomes static (and thread-safe) during whole
ethernet context lifetime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net_ppp_carrier_on() and net_ppp_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
