initial support for the Lilygo TTGO T-OI-PLUS ESP32-C3 board
Signed-off-by: aisuneko icecat <iceneko@protonmail.ch>
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Adds support for the CVA6 CPU on a Genesys 2 FPGA board
(https://github.com/openhwgroup/cva6).
The SoC currently contains the CVA6 CPU with the SV39 MMU, interrupt
controllers (CLINT and PLIC), UART, a SPI for booting from SD, a boot
ROM, and I2C controller for on-board audio, a GPIO and the lowRISC
ethernet subsystem.
Two slightly different versions of the board are added, with a 64-bit
and a 64-bit configuration of CVA6, respectively.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
Adds support for the CVA6 family of RISC-V CPUs.
CVA6 is commonly found as a soft core CPU on FPGA designs.
Different configurations and instruction set extensions can be
configured, and different SoCs targeting various FPGA boards are
available.
This commit adds support for the 32-bit and 64-bit configurations
of CVA6, as well as three slightly different SoCs (a minimal 32-bit
configuration, a 64-bit configuration without FPU, a 64-bit
configuration with FPU).
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
For the broadcast setwml ccc, the argument vector index of the input
length is 2 instead of 3. This commit fixs this issue.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
The lsm6dsv16x driver is using an incorrect value for the index
into the acceleration range. This results in using the wrong
range. The issue was found to be a bug in a MACRO in
lsm6dsv16x_decoder.h that was used to find the index in the
acceleration range. The MACRO was improperly counting zeros from the
leading edge, instead of the trailing edge.
Signed-off-by: Derek Valleroy <derekvalleroy@fb.com>
Previously, the RAM code size was limited to 1K, causing issues when the
code exceeded this limit. This update modifies the implementation to
support RAM code sizes up to 4K
test: zephyrproject/zephyr/tests/drivers/flash/common --> pass
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The osFlagsWaitAny option is not handled correctly. It returns once any
flag at all is set, whereas it is supposed to only return once one of
the flags specified in flags is set.
Signed-off-by: Utsav Munendra <utsavm@meta.com>
Sample showing how to use the additional wakeup signal
in nordic,nrf-spis driver. The application, configured
as a SPIS, is put to sleep while waiting for an SPI
transmission. An external device working as a SPIM and
also handling the wakeup signal wakes the application
up just before the transmission starts.
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
Support parsing and serializing of struct fields that are defined as a
char array.
Use the token JSON_TOK_STRING_BUF to parse and serialize a string for a
char array, for example:
struct foo {
const char *str;
char str_buf[30];
};
struct json_obj_descr foo_descr[] = {
JSON_OBJ_DESCR_PRIM(struct foo, str, JSON_TOK_STRING),
JSON_OBJ_DESCR_PRIM(struct foo, str_buf, JSON_TOK_STRING_BUF),
};
The struct 'json_obj_descr' now has an additional union member 'field'
to store the size of the struct field, which is used with the token
'JSON_TOK_STRING_BUF' to determine the element size.
Fixes: #65200
Signed-off-by: Christoph Winklhofer <cj.winklhofer@gmail.com>
BoardYml, DeviceTreeBindings, Kconfig, and KconfigBasic checks
can be run with a decentralized west manifest.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Currently, only MCUBOOT_LOG_LEVEL_INF and MCUBOOT_LOG_LEVEL_WRN
are allowed in UNDEF_KCONFIG_ALLOWLIST. Let's allow
MCUBOOT_LOG_LEVEL_DBG as well, since some use cases may require
this level of scrutiny.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Was getting several false positives about whitespace at line
endings with check_compliance.py because it was analyzing
.patch and .diff files as source.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The i.MXRT10xx series have configurable GPIO pull strengths.
These are available for configuration in the pinctrl system, but not for
regular GPIO use.
This commit adds SOC-series specific GPIO configuration bits for selecting
weak or strong GPIO pulls, similar to drive strengths available from other
GPIO pin configuration examples.
This has been tested on a custom i.MXRT1062 product.
Signed-off-by: Stefan Giroux <stefan.g@feniex.com>
This was not getting enabled because label was passed instead of path
and dependency was not met.
Fix the DT function to use label.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These nRF70 driver operational modes are important, so, extend the help
to clearly communicate the mode's purpose.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Create a driver implementation for the battery charge controller
TI BQ25713.
It includes the ability to enable / disable the controller and also
to setup max current and voltage charge parameters at initialization
time but also at run time.
On the other hand, it is possible to assign / obtain input voltage
and current regulation.
Signed-off-by: Kiara Navarro <knavarro@paltatech.com>
inherit from base.yaml instead of sd-device since this device is not
meant to be used on an SD bus.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Validate that a received LL_CIS_REQ is valid and reject if it is not
Fixes EBQ test failure in LL/CIS/PER/BI-07-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add missing define in order to enable RGB_888 pixel format support
on the mcux_elcdif driver. Tested with TM070JVHG33 display
Signed-off-by: Isaac Yuki <isaaclucas.delimayuki@tq-group.com>
Accidentall chosen wrong interrup level for flash controller
fixed to be inline with other devices flash controller level
Signed-off-by: Petri Pitkanen <petri.pitkanen@silabs.com>
Fix credential store corruption issue caused by missing
security type checks. Add support for all valid security
types to ensure credentials are parsed correctly.
Fixes#88261.
Signed-off-by: Triveni Danda <triveni.danda@nordicsemi.no>
Fix build error which happens when LSM6DSV16X_STREAM=y and there
are no lsm6dsv16x driver instances on i3c bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support for Nuvoton numaker m55m1x series EMAC controller.
Also include NOCACHE_MEMORY allocation.
Support to generate random mac address and remove emac data flash.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Fixes an issue whereby flashing would fail when using --erase since
it would erase the cores twice rather than once, by adding a flash
runner run once board configuration
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update the JSON test cases to explicitly cast NAN and INFINITY to double
type to avoid implicit promotion.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This reverts commit ee05087935.
Since all devices now support nrf_clock HAL as of nrfx 3.10
Signed-off-by: Robert Robinson <robert.robinson@nordicsemi.no>
